Greeting to all
Well today tutorial on how to do engine drain + mechanic treatment on a BMW E92 2.0L 180HP ENGINE [N47] VERSION XDRIVE PACK M,
I’m not a professional or bio-chemist, I don’t have eyes or camera in the engine and I wouldn’t tell you what happens at the heart of an engine running with this type of products, so my opinion remains personal, it’s based on this car point.
I could not tell you if it works on such or such engine so thank you to remain constructive and remember that I share it with you to help you, to show you and make you your own opinion!!
MECA-RUN does not recommend rinsing after using the engine flush on their site or on their products: a small reminder that many forget.
Determination of MECARUN P18 for 4-stroke engine
4 % oil volume or l0 % engine displacement (competition 6%)
Then 1/2 dosage to be added to the new oil with each oil change.
Dosage of the ENGINE FLUSH :
10% Engine Flush in old engine oil just before emptying.
- Run the engine at idle for 10 to 15 minutes without running under fouling.
- Drain immediately, install a new oil filter with the new oil.
- Then place a bottle of P 18 (recommended).
For my part it was 10% of (5.5 liters) = 550lm of Engine flush or the whole bottle.
and 4% of 5.5L = 220ml of P18. (MAXI 6%) = 330ml of p18
after 1500km: the buddy saw his consumption drop from 7L to 5.5L/100
We will see in time if it holds or if the eco 10000 to really play in the balance + that p18.
COMPLY WITH THE GRADE AND STANDARD OF YOUR OIL.
APPROXIMATELY 5.5L 5W30 ENGINE OIL
BMW LL-04 SPECIAL FAP STANDARD [DPF]
IMPORTANT NOTE:
This link tells us: www.mecarun.fr/engine-flush/
Do not use the Engine Flush On petrol engines over 150,000 Kms or with a very high oil consumption.
*******************************
I hope this video will get you more and this is it and well you can leave a little blue thumb to cheer me on
I put below the links of the MECA-RUN Products and the Official Website as well as the products of the video allowing you to do the emptying of your bmw e92.
OFFICIAL SITE
www.mecarun.fr/
ENGINE FLUSH
amzn.to/3gLbi7I
www.meca-run.eu/fr/nettoyant-...
MECARUN P18 -- Available in several versions
amzn.to/2MB5Vud (250ml)
amzn.to/2zRADwb (500ml)
amzn.to/2BExb8X (1000ml)
www.meca-run.eu/fr/19-traitem...
ORIGINAL OIL BMW 5W-30 LL-04 - 6 pieces of 1L = 59€ per 6 liters
amzn.to/3laSAsK
or - expensive
Total Quartz Ineo MC3 5W30 Engine Oil, 5L = 35€
amzn.to/2CRpJZ4
Oil filter: BOSCH - F 026 407 123
amzn.to/34yOrsL
Oil funnel: with filter and extension included for 2-3€
amzn.to/3dne4hr or amzn.to/3cuEMUp
See you soon for a new video
-----------------------------------------------------------------------------------------
Image right OK: In conjunction with the company MECA-RUN!! INCLUDED A COMMERCIAL COM
----------------------------------------------------------------------------------------
links provided in this video to tools and products may be equivalent to those used in this video.
The channel The small tutorials of Pierrot and these videos are put online for simple objective of free mutual aid and knowledge sharing! do not forget it;)
The director could not be prosecuted for the misuse made by people visualizing the content of the chain.
Please always wear safety equipment!
In doubt? Call a professional mechanic
Негізгі бет Автокөліктер мен көлік құралдары MECARUN P18 + VIDANGE MOTEUR SUR BMW E92 320D 180CH [N47] XDRIVE ?!
Пікірлер: 35