Al Ameen Trading Corporation Pvt Ltd
+92 324 2526336 (Phone / WhatsApp / Wechat)
Needle Controller: Advanced technology cuts percentage of second‑quality fabric.
Broken and bent needle heads are unavoidable. The rapid detection of faulty needles is therefore of utmost importance. The MNC 3 Needle Controller system detects damaged needles rapidly, effectively and reliably. The controller can be used on single and double jersey knitting machines, on striper fabric, drop stitch pattern or Jacquard machines. The optical needle
sensor detects broken and bent needle heads in lightning quick time and will stop the knitting machine immediately.
The MNC 3 system consists of the controller unit, a machine cycle sensor and up to two needle sensors. The controller has three operating modes for various applications. The system is programmed on the control unit. The status of the needle head is monitored by a fibre optic cable. The position of the bent or broken needle is displayed on the control unit.
Негізгі бет Ғылым және технология Memminger - MNC3 - Knitting Machine Wastage Reduction Device
Пікірлер: 2