Great video. I have a w166 with the ntg 4.5 Gen 2 with speed limit assist which works only in EU countries while outside the EU it is not recognizing speed signs. I have access to Vediamo and have checked codings in mpc212 but only EU countries appear which are already coded. Do you have any idea what I might need to do? Someone in a forum suggested that mpc212 is an old camera and that other countries are activated through the command which I saw that there were some setting in Engineering mode that you showed. Thanks in advance
@German-garage
Ай бұрын
I am not familiar with the speed limit assist feature because I have never seen it here in the US on NTG4.5.
@Matt_3535
Жыл бұрын
I have NTG5 or 5.1 but I can't enter into the eng menu with this key combinations. Is there any other key combination? It's W212 2015, I can see Comand Aps Ntg5/5.5 on the data card. It has Sd card and sat-nav on it
@German-garage
Жыл бұрын
You have to activate engineering mode with vediamo diagnostic software, and then you can enter engineering
@Beryce72
5 ай бұрын
How do you access with NTG5.1 it is a CLA 250 year 2015? End call + 1 + # doesn’t seem to work… but end call + 7+ 9 will get to some other weird menu
@German-garage
5 ай бұрын
You need to activate engineering mode with vediamo
@DeepSoulfulShorts
Жыл бұрын
Super Video, hast du eine Anleitung für GLE W166 Baujahr 2016? Leider komme ich mit der vorgegebenen Kombination nicht ins Menü.
@German-garage
Жыл бұрын
try hang-UP 1 # if this dont work your comand unit engineering mode is disabled and can be enable with vediamo, also check out my new video,hope it helps
@youssefelmakhchouni5128
9 ай бұрын
Layr7m lik lwalidin
@German-garage
9 ай бұрын
??
@ricardoterada
Жыл бұрын
excelente video, do you have eng and dealer codes for gle coupe amg 43 2019 - W292?
@German-garage
Жыл бұрын
On W292, eng mode has to be activated with vediamo after ntg 5 eng mode is kind of locked. For the dealer menu, check out my other video I did for s550 dealer manu
@ricardoterada
Жыл бұрын
thanks a lot@@German-garage
@KenNickless
Жыл бұрын
Do you have a video for engineering mode for NTG5.0 for GLA45 AMG please?
@German-garage
Жыл бұрын
I am working on it stay tuned
@German-garage
Жыл бұрын
You can also try hang up button + 1 + #
@KenNickless
Жыл бұрын
@@German-garage Tried that with no luck. The only menu I can access is hang up 7 + 9 the Dealer menu.
@German-garage
Жыл бұрын
What year is your gla45?
@KenNickless
Жыл бұрын
@@German-garage Product ion Date 2016-04-27
@dennis-256
8 ай бұрын
Hi if I go to this menu I get another screen on a w212 facelift do you know how to activate the aux
@German-garage
8 ай бұрын
If your car has aux as an option, you should be able to use it without entering engineering mode
@robertorodriguez-gm9bq
7 ай бұрын
buenas tardes por lo que veo estar muy puesto ya me podrías ayudar a mí en un problema ,no me importa si me ayudas y me lo solucionas te hago un bizum te explico mi coche es un clase a 180 w176 del año 2014 compré una pantalla de ali me funciona todo perfecto AUDIO DEL COCHE OK INTERNET OK LOS VIDEOS OK EL FALLO ESTA EN EL TELEFONO CUANDO ME LLAMAN YO ESCUCHO PERFECTO pero a mí no me escuchan llevo 2 años con este problema MI TELEFONO
@Shohankuruppu
Жыл бұрын
Hi friend, How can i change region code from JAP TO UK OR US IN W205 ?
@German-garage
Жыл бұрын
Map region can be changed by installing new maps in the region you are located, but as far as command unit region you have to install new software for that region but I believe there is an option under engineering mode that you can change region,I will look for it and let you know
@north-nomad
Жыл бұрын
@@German-garage Thanks for the video. I have the same issue, let me know too
@German-garage
Жыл бұрын
Try to find 7 HW settings--7.3 Market/DVD settings--3 Region code Also try 3 HU information--3.11 TCM information--1 filter information--(a) County code Or 5 Table version--1 location Table (j) GB
@SomeoneWhose
3 ай бұрын
How restart the whole process can you explain please
@German-garage
3 ай бұрын
Can you be more specific?
@SomeoneWhose
3 ай бұрын
@@German-garage6:25 you said choose one and restart the whole process
@German-garage
3 ай бұрын
@user-wy9tt1qt1m in order for you to see which selection you have made, you need to restart the comand unit
@SomeoneWhose
3 ай бұрын
@@German-garage how?
@German-garage
3 ай бұрын
@user-wy9tt1qt1m hard reset
@robertorodriguez-gm9bq
7 ай бұрын
4.5
@robertorodriguez-gm9bq
7 ай бұрын
a mí no me sale
@German-garage
7 ай бұрын
Maybe you have ntg 5,does your radio look same
@robertorodriguez-gm9bq
7 ай бұрын
TENGO 4.5
@German-garage
7 ай бұрын
It should work, but you might have an issue with command unit
@JackieRodriguez-e3y
Жыл бұрын
What's the point you can't really do anything you can't even change the color of your command center
@German-garage
Жыл бұрын
Engineering mode is designed to help after there has been a new unit installed,settings change, or any factory option added,just like the manu said (Engineering mode), you can replace your screen to aftermarket radio unit (android) that will allow you to do what you want
@vincenzocaliarobinson7803
9 ай бұрын
@German-garage Hey German Garage , I have purchased an aftermarket HU same make model down to part number unfortunately it got locked as soon as I turned it on. Seller sent donor vehicles
@vincenzocaliarobinson7803
9 ай бұрын
Donor vehicle vin , but don't know where to enter code as it says Anti-theft Activated please see service center . What can I do now ?
@German-garage
9 ай бұрын
@vincenzocaliarobinson7803 do you have vediamo software or can get access?
Пікірлер: 59