The SLK model R171 with model refinement package
Parts are sometimes retrofitted to this vehicle.
If so, interior trim components usually have to be removed.
This video shows how to remove the components of the center console.
The battery is disconnected first. Disconnect the negative terminal.
Start on the front section of the center console.
Remove the shift cover using a long wedge.
Disconnect the electrical connector of the selector lever.
Remove the selector lever retainer.
If this proves difficult, use a pair of pliers.
After releasing the parking shift lock, move the selector lever to neutral.
Only then should you remove the selector lever from the selector lever module.
This prevents any damage to the interior.
Detach the cover on the center console and disconnect the two connectors.
One connector is for the mirror, the other is for the convertible top.
The stowage compartment can now be removed.
Remove the two rubber dampers and then remove the two mounting screws.
The stowage compartment can then be taken out.
The next component to be removed is the KLIMATRONIC operating unit.
Simply pull it out and disconnect the two connectors.
The KLIMATRONIC operating unit is then removed.
To remove the beverage holder, remove the two rubber dampers.
Then remove the two mounting screws behind them and take out the beverage holder.
The upper control panel control unit is removed next.
Create access to the electrical connectors and disconnect them.
The COMAND now has to be removed.
First remove the four mounting screws.
On the COMAND, five electrical connectors have to be disconnected.
Once the connectors have been detached, the COMAND can be taken out.
Removal of the front section of the center console is now complete.
Continue with the rear section.
Open the cover of the stowage box and unclip the retaining clips.
Use a suitable screwdriver.
Remove the cover from the hinge of the center console.
Next remove the trim over the rear of the stowage box.
Remove the two mounting screws.
Disconnect the connectors.
These connections are only present on vehicles with sound system ...
... because two speakers are then installed here.
Disconnect the electrical connector between the backrest.
Remove the bolts from the mounting console of the stowage compartment.
Once the bolts have been removed, the mounting console can be detached.
Now remove the front screws of the center console.
The screws are located here.
Remove the screen for the parking brake. The brake can now be released.
First move the selector lever to "P" to prevent the vehicle from rolling away.
Open the cover of the console.
First detach the screw cover and then remove the mounting screw.
Then remove the illumination.
The illumination is only present on vehicles with the illumination package.
The console can now be removed simply by pulling it upwards.
Here you can see which screws only have to be loosened and which have to be removed, ...
... so that the console is easier to install.
Finally, an overview of all of the parts.
--------------------------------------------------------------------------------------
instagram:
/ mbownersclub
twitter:
/ mb_owners
Негізгі бет Mercedes-Benz SLK - How to remove the center console and COMAND | R171
Пікірлер: 3