wow Mercedes is crazy that was hell of 2 much work but you did just perfect well Done.
@nunyaf-nbizness
3 жыл бұрын
saved me a bunch of time trying to fugure out sequence and where MB hid all the fasteners. Thanks!
@saul1972
3 жыл бұрын
Thank you very much for your details how to remove the panel. I’m going to do that in my C230 2005 kompressor. And I let you know.
@studiokunci
3 жыл бұрын
Thank you very much for this informative video, sir.
@sergman69
3 жыл бұрын
Thank you for the video I really appreciate it I’ve been doing it for the last four years rough and trying to figure it outAnd makes it a lot easier for me thank you
@jeffreykennedy5956
10 ай бұрын
Awesome video. Please make more!
@borismospan8214
4 жыл бұрын
very good video, I had bolts in the middle of the console and the coffee cup holder has to be removed (just pull up on tab and twist out) and then fold back what holds the lighter to have access to these 10mm bolts, note plastic has to clear the bushings where those bolts are to slide the console back. The two screws in the vent vanes are designed to stay in the assembly once unscrewed. The whole job can be done without a magnetic pickup but useful if you have fat fingers. I had to remove the key switch so to take the switch off the panel simply use a small flat and pry on a tab of the outer ring and push counter-clock wise.
@marvinrivera9410
3 жыл бұрын
GRACIAS DIOS TE BENDIGA POR TU AYUDA...
@Odocracker
2 жыл бұрын
Great work 👍👍👍
@AndyPMercedesBenzChannel
2 жыл бұрын
Thanks
@KH-on8pp
3 жыл бұрын
Great well done u did it
@cortneywinters9480
4 жыл бұрын
Damn the sounds of extreme amounts of brittle sounding plastics 😱😰😨
@AndyPMercedesBenzChannel
4 жыл бұрын
Yes, plastic doesn't age very good.
@AustinTXRealEstatebyFelix
3 жыл бұрын
Key still won't turn after replacing the ignition switch and key with a working one. For sure, the key was bad, but now I don't know what's the issue.
@Hotboydjay
2 жыл бұрын
Did you ever fix it ? I need help
@johnlynn9399
Жыл бұрын
Need help I working with a Mercedes Benz 2005 c230 kompressor steering wheel is locked key doesn't wanta turn but the car wants to work
@AndyPMercedesBenzChannel
Жыл бұрын
Look at this cable, either at the transmission side or at the Ignition lock.
@cap1330
4 жыл бұрын
in my case I had to solder one swich inside the lock
@goldrun1399
5 жыл бұрын
Could this cable be the reason why the key will not allow the switch to turn to the on position
@AndyPMercedesBenzChannel
5 жыл бұрын
Its a possibility, this cable runs from the shifter.. I cant remember now exact function of the cable
@marger9713
3 жыл бұрын
@@AndyPMercedesBenzChannel I'm having this problem right now, where my key wont turn at all when you put the key in to start the car . Mercedes told me something about a " E.I.S " replacement. Not sure what to do .
@andrewp3089
3 жыл бұрын
@@marger9713 check the mechanical side first. Google has lots of info on eis module repair
@jaygarrett3898
2 жыл бұрын
Does the ignition switch have to be programmed by a computer to work? Or can you buy a new one and it’s ready to go?
Пікірлер: 30