Tools required are as follows.
10mm socket for 3 access cover bolts.
7mm socket for filter box to inlet pipe jubilee clip.
E11 Female Torx for 2 air filter box bolts.
E10 Female Torx for sensor securing bolt. Be careful not to drop this one!
Plastic clip on sensor plug is very easy to break off so be careful, they are old and brittle.
Total time, less than an hour.
Top tip, you can use your camera phone on video with the torch on to help guide your tools into place if you're struggling with just feeling your way around.
This was a 3 pin connector, Mercedes Item Code A642 905 00 00.
Негізгі бет Mercedes ML320 W164 Crank Sensor Location and Replacement
Пікірлер: 21