Thank you for making the video. I am about to do the same for my car's new SAM. S-class w221 2007 model. I will follow all steps carefully.
@MuzixMaker
27 күн бұрын
I have the same year and model. What are your symptoms?
@josephkebbi1146
27 күн бұрын
@MuzixMaker Hello. My headlamps do not work. The window mechanism is not working either, and the central command panel doesn't come on. There is severe rear battery drain.
@MuzixMaker
27 күн бұрын
@@josephkebbi1146 thank, so far I only have a headlamp and cornering light out on the left side.
@citylocksmith3553
2 жыл бұрын
I noticed you didn’t erase the data first you just went straight to write any particular reason for that? I’m supposed it’s not best to erase then write Edit: actually I see you answered this in a similar question below which is what I assumed. It’s going to overwrite the originals when it’s writes anyways. Thanks so much for sharing man. Very good tutorial as always
@techguy1678
Ай бұрын
Are you located in the US? I'd like to contact you to discuss a possible retrofit from my MB S550 (W221). Thanks!
@graemewren4430
Жыл бұрын
I am trying to clone a front SAM on a 2005 Merc CLK500 coupe using an Autel 608 Pro. I have followed your instructions, but when I select 'other' in the final menu that you show, the W209>Front-SAM-COMPUTER>RW does not appear, only selected Mercedes models and functions. Can you show how to access the W209>Front-SAM-COMPUTER>RW to achieve what you are demonstrating for the W221?
@muhammedcevdedgali8238
3 ай бұрын
whats the point from Online programing if we need to clone the old module ? may you explain me that ?
@sefofatai6618
2 жыл бұрын
I'm subscribing now. this tech knows a lot. thanks for sharing your knowledge. Back in the days. Technicians will take their knowledge to heaven with them because they couldn't take their money.
@anadeluna3605
Жыл бұрын
Do you know where they are located I need my car to get fix?
@partoems9376
2 жыл бұрын
Hello, thanks a lot for your videos. May I ask if a GBOX2 can be used instead of the XP400?
@huyug1
2 жыл бұрын
No, not at this type of programming. Gbox emulates obd2 port as a breakout box. This is directly UART or JTAG programming which reading and writing the MCU directly.
@waqasazmat81
2 жыл бұрын
Thanks for posting this :)
@misaelsalas98
Жыл бұрын
one question i have a 2010 s550 mercedes can i use the used fuse box and the original sun module or do i also have to program the fuse box
@motosystemltd
3 жыл бұрын
Great toturial, my question why You didn't read first damaged SAM from vehicle, and transfer data to 'new one'. Also the donor must be virginized before action? Or I misunderstood something, Thank You
@huyug1
3 жыл бұрын
I actually read the original one first because the shop that I was doing the job for installed the new one to car already thinking it can be done by obd. If you want to do obd programming with Xentry than yes you can virginize it by pressing clear Sam and put it in the car and do obd programming. If you want to just clone them you do not need to virginize it im608 will just overwrite the files.
@motosystemltd
3 жыл бұрын
@@huyug1 Thank You for clarification, just every day is learning in this branch 😁😁 never done this before on this vehicle before.
@dialessandroferrer-yd7nt
2 ай бұрын
To do programming with star xentry Mercedes Benz software you need to have access to Daimler login ID which is under license programming what we don’t have only Mercedes Benz technicians have is better cloning it I think
@apexsmith3491
Жыл бұрын
Great Video, just wondering though…. is there any way to do this on the W203 generation, got a 2004 C320 compressor and need to program the front Sam
@mustafaosman48
Жыл бұрын
Would you have to do this if the Sam was new from the dealer?
@huyug1
Жыл бұрын
If you do this with new one it would also solve the problem or else you would need Xentry (Factory tool) to program and code it. Some after market scan tools can do SCN coding through OBD but not really reliable. Some of this ECU’s also plug and play as long as ECU is new.
@anadeluna3605
Жыл бұрын
Where are you located I have the same issue with my Mercedes Benz
@D33P_4K
Жыл бұрын
will an autel im508 work?
@javierbarreto9521
2 жыл бұрын
Can you do this job with im508?
@mohammadalhajmoussa3159
Жыл бұрын
good job
@claudiofox6866
2 жыл бұрын
puoi mandarmi lo schema per sam retro per programmarla grazie
@mbzedits9546
3 жыл бұрын
Hello , do you have a number or an account that I can contact you with ? My question is I have a 2019 silverado and I want to install an oem fog light kit but after the installation the bcm need to get flashed in the dealership so they can enable the fog light option and also to enable it in the instrument cluster unfortunately the dealership in my country is too stupid to do it and when I ask them if they have this service they say No and it will get out of warranty if i tried to install anything that related with the electronics So please answer me if you can help because i saw your video on the gm bcm reprogramming and I wanted to ask you if you can help me plus I will pay for your help if tell how to do it Thanks
@huyug1
3 жыл бұрын
Yes definitely, contact me at +13472650322
@MuzixMaker
27 күн бұрын
What the hell is the point of needing to personalize a freaking sensor module except to require a $250/hr trip to a dealer?
Пікірлер: 32