Hi Jim, I think first your mixing was a bit short , and as 2 component system, a proper mixing is key. Your poor mixing may cause reduced properties of that glue. I use this kind of glue (Tertell ) and after drying , this looks like stone hard! Thus, regarding your handle, it's best to apply the glue both sides of the cracked handle, which should harden far more ( but at least thicker coat than you did )... Hope the best
@JimMcLaren1950
Жыл бұрын
Thanks for the info. Probably didn't mix it well enough and on the handle good idea putting on both sides. Yes probably didn't have enough.
@erikkekkonen2941
Жыл бұрын
Great video Sir !! I also seen this on Facebook but thought I would come onto KZitem and check if there were any reviews before I pulled the pin on this , and I'm glad I did !! Thank you for sharing your experience with this Poor quality glue !! You saved me some money and gained a Sub !!Take care !!!
@JimMcLaren1950
Жыл бұрын
Your welcome. So many ads on Facebook they all look god in the videos but lots are not worth buying. Happy I saved you money. Plus thanks very much for subscribing. I have other products from Facebook coming up for review . ( Chubby Cable )..
@grandpabill1959
Жыл бұрын
Wire cutters I put a paperclip through the hole then glued it all. Later filed off the extra and it held.
@JimMcLaren1950
Жыл бұрын
Going to try JB Weld . Good idea using the paper clip. Thank You.
@parvariramin
Жыл бұрын
Thanks for the great video, I have a broken part of my exhaust car, can I use this glue to stick a piece of metal to it for a long time? (I want to use this glue instead of welding)
@JimMcLaren1950
Жыл бұрын
If I was to try anything I would use JB weld. I did use JB Weld on a wood stove so that the latch would hold in place. I am not sure that it would work on your muffler but JB Weld works a lot better than the stuff showing in the video and JB weld comes in a larger size the tubes in the video are small and would take a lot more to attempt the job.
@jameswells9749
5 ай бұрын
Will it work on wood?
@sharppen9519
6 ай бұрын
Is it use to aluminium to aluminium how long its bonding ?
@kevinisawake
2 ай бұрын
JBWELD - enough said.
@JimMcLaren1950
2 ай бұрын
JB Weld works good.
@chingonmex2488
9 ай бұрын
Thanks for the review! It looks like this glue is made for leaks only..
@JimMcLaren1950
9 ай бұрын
Your welcome.
@be236
Жыл бұрын
Does this work on plastic / PVC pipes?
@JimMcLaren1950
Жыл бұрын
It says it does.
@oldschooldiy3240
Жыл бұрын
Not even 4 minutes in and he is going to fail! The piece on the wire cutter is supposed to pivot! If you "weld" it in, it will not work!
@Dendrotera1
Жыл бұрын
Hi, is this glue good for exhaust? 🤔
@JimMcLaren1950
Жыл бұрын
The tubes have very little glue in them. I would try JB Weld.
@reioXyhi
2 ай бұрын
No, its stands only for 200 celsius.
@flitsies
Жыл бұрын
Yeh I know this stuff it's been around a long time now, many years, it used to be liquid metal it was called you could buy it in big tubes, it never worked then and it obviously still doesn't work. The idea is good but the product just doesn't work. Who wouldn't like to use a glue that actually worked for what it was made for, but such things are very hard to find. That plastic break, you might have more success using super glue with Styrofoam, there's a guy on youtube been doing this stuff, not tried it yet but I know the super glue and baking soda thing works pretty good. I suspect the super glue with the Styrofoam would work as it's a type of plastic and super glue works well on plastic, also it melts that foam making it a hard substance. But the metal part you might be better off trying to weld that back together or file it down and use a plate and attach the spring thing to the plate, if you still have the parts that is.
@alpachino468
4 ай бұрын
Basically, the Chinese sold you snake oil...
@JimMcLaren1950
4 ай бұрын
lol
@Schroeder9999
Жыл бұрын
JB Weld failed the same way though
@raymondkhan2709
13 күн бұрын
Is this grindable
@jimmclaren3085
13 күн бұрын
Yes it is grindable.
@raymondkhan2709
13 күн бұрын
@@jimmclaren3085 thanks for the quick response
@reioXyhi
2 ай бұрын
Ohhh you didnt mix it enogh. Thats important.
@JimMcLaren1950
2 ай бұрын
Thanks Do you go by color ir just mix it longer.
@reioXyhi
2 ай бұрын
@@JimMcLaren1950 the same a+b glue buyed from Aliexpress says mix very carefully, i mix it maybe 3 times lomger time than in video.. I have never failed and I'm surprised every time how really good this glue I've never tested the heat resistance, promised 200 celsius but I will some day in my empiric research😄
@JimMcLaren1950
2 ай бұрын
@@reioXyhi Thanks for posting.
@saidberjali7075
Жыл бұрын
السلام عليكم ورحمة الله وبركاته فين كيتباع هاد المنتوج
@sulimanalghaithi9342
Жыл бұрын
في ali express
@syedsheikhhamidalattas3697
7 ай бұрын
Plase I wan oder
@JimMcLaren1950
7 ай бұрын
There is no web page to order from. Looks like they discontinued.
@woodsmanforlife1677
Жыл бұрын
Chinese junk! What about JB Weld?
@JimMcLaren1950
Жыл бұрын
Tried JB Weld but not for Plastic or pliers.
@Nathan-lt6bw
Жыл бұрын
@@JimMcLaren1950 it kinda does work for plastic and metal.
@JimMcLaren1950
Жыл бұрын
@@Nathan-lt6bw JB weld did work for other metal things. I used it on a stove where the latch wasnt catching. Built it up so the latch would hold. In place.
@troyaikman1234
Жыл бұрын
Chinese goods are good at advertising only
@JimMcLaren1950
Жыл бұрын
Exactly , it doesn't work as shown in their videos.
Пікірлер: 41