The mevotech green/premium is really good . The classic/blue line is shabby
@Naut1188
3 ай бұрын
Installing some TTX on my Tacoma this weekend
@keltecshooter
2 ай бұрын
Moog is now at a level with dorman
@briang4470
28 күн бұрын
The only difference is when you buy dorman, you know your buying garbage but every once in a while you get something decent for cheap(sometimes they actually have updated/improved products). Where moog your paying a premium price for a product thats supposed to be superior top shelf quality but most of the time you get bottom of the barrel garbage that isnt any better than the cheaper alternatives.
@lucid484
2 ай бұрын
I use Mevotech and just installed some more of their stuff. But I replaced a control arm on my wifes car with Mevotech and within a year and a half the Ball joint was completely sloppy and moving freely, making a ton of noise. Put some OEM ones back in.
@MegaMarclar
2 ай бұрын
there are different tiers of mevotech parts. Some are lower quality.
@BurchellAtTheWharf
2 ай бұрын
They look like gooder quality over stock
@MegaMarclar
2 ай бұрын
depends on the application, but in general I avoid moog at all costs, I'm tired of filing warranty claims.
@Rs6Quik
Ай бұрын
Just one brand/maker isn't the end all it used to be...now we gotta shop this brand strut, that brand knuckle, etc..shop smart my automotive kindred!!
@SpecialAgentJamesAki
2 ай бұрын
There’s still some moog USA made stuff floating around if you get lucky the mom and pap shop might have some still on the shelf. I found upper and lower control arms for my truck still made in USA just look at the box before you buy.
@odysseyusa
3 ай бұрын
Having been around a while,but not needed to replace normal wear parts for years, I go to look into Moog and I’m surprised to hear all the negative. They used to be top of the line and correct deficiencies in stock parts! Sad… I have a JL wrangler that I’m going to install a TTX inner/outer tire rod on. I’m hoping it’s at least as good as stock because stock is way more expensive. Same for aftermarket “upgrades”.
@MegaMarclar
3 ай бұрын
A lot of those old brands.. MOOG, Gates, Yukon, Redhead,... all betting on their old reputations, selling crap Chinese parts now. Its really sad to watch.
@dadgarage7966
6 ай бұрын
Tried putting upper ball joints on my Toyota Pickup and the Moogs wouldn't even fit nor did the boots fit properly.
@MegaMarclar
5 ай бұрын
I bet the moog joints were knurled too, ya low quality chinese crap.
@Soundsofthewood
21 күн бұрын
I replaced everything in my suspension with moog four years ago. The upper balljoints are getting worn out. The lower balljoints are shot. Inner tierods get replaced when I did the rack. The outer tierods are decent. Looking to go with this brand next for ball joints.
@MegaMarclar
20 күн бұрын
mevotech is great. They have a few different tiers of parts too. cheap to top of the line. I have 2 more trucks here I'm installing them on next week.
@Soundsofthewood
20 күн бұрын
@@MegaMarclar what is the top of the line versions? The ttx?
@MegaMarclar
20 күн бұрын
@@Soundsofthewood yep
@user-qx2fd8ej2e
Күн бұрын
@@MegaMarclar how does TTX compare to Supreme, and is "original grade" the cheap line?
@MegaMarclar
Күн бұрын
@@user-qx2fd8ej2e no idea, I never bought or installed any other product line other than ttx.
@leod3963
11 ай бұрын
mevotech ball joints tie rods are also made in China
@DaveDavis-ml5ic
10 ай бұрын
I just bought a really nice alternator. W.A.I. Global brand. it's also made in China but it runs like a top and is quiet no sound.
@MegaMarclar
10 ай бұрын
everything is made in china, some to different price points than others.
@tucobenedicto109
4 ай бұрын
Looks prety good, moog is shit. I did buy Timken Bearings, they move the space shuttle and my car! Looking for stabilizer links.
@Munky332
3 ай бұрын
my Timken bearing I just put in my 04 avalanche came from korea. Not sure how much better that is over china... Why can't we have decent products any more?
@blizzyblizzyblizzy
11 ай бұрын
Thoughts on Mevotech Supreme products?
@MegaMarclar
10 ай бұрын
I use a lot of the TTX series, have not tried any of the other product lines much. But in all reality most everything is built in china anyway.
@Killian665
2 ай бұрын
They’re junk. I had 2 brand new lower ball joints fail on a Honda in 4 months. When the originals lasted over 30 years. Whole joint just pulled apart in a parking lot luckily
@lucid484
2 ай бұрын
@@Killian665 Same thing just happened to me, Mevotech ball joint toast after a year nd a half.
@martyno8696
4 ай бұрын
Is TTX all we have left in terms of quality?
@MegaMarclar
4 ай бұрын
apparently, everything is chinese now. all the big manufacturers sold out.
@martyno8696
3 ай бұрын
@@MegaMarclar much like the rest of the country.
@upnorth5465
Ай бұрын
Anything blue booted mevotech is pure garbage. The TTX mevotech is 👍 good stuff.
@str8chillin18
2 ай бұрын
Ttx is the great
@trentmorrison6074
Ай бұрын
The moog looks like its old and used as shit.
@MegaMarclar
Ай бұрын
These BJ's were about 1 year old.
@largemouthbassman5628
Ай бұрын
Moog is trash
@shyne5637
11 ай бұрын
Mevotec is junk I put brand new control arms on a Honda they were makeing noise brand new out the box
@MegaMarclar
10 ай бұрын
that really means nothing. probably installed them incorrectly.
@shyne5637
10 ай бұрын
@@MegaMarclar impossible one garage did them for me then I warrentied them out then my dad did them for me tightened them all on the ground and all I Ben working on cars for 30 years now
@Kavie93
8 ай бұрын
Which mevotech line did you buy? Because they offer 3 different brands…..
@lifegoeson4085
5 ай бұрын
@@shyne5637Moog control arms are better, I use carquest upper control arms made by Moog
Пікірлер: 43