I am sure it gives you pleasure when every piece you are fixing functions properly but of course it gives us, the viewers more pleasure watching you and listening to your helpful commentaries so once again thank you Lance for videos.
@BundyBearsShed
2 жыл бұрын
Thank you very much!
@Mrgreendragon3
5 жыл бұрын
thanks lance , this is a great series . terry in ireland .
@BundyBearsShed
5 жыл бұрын
Thanks Terry.
@thorthunder3227
Жыл бұрын
Would you consider doing a complete rebuild on the 1965 Massey Ferguson 135 with the Z145 Continental engine. I know many would love to watch you do this as it would give more confidence on their rebuilds. There are lots of the gas Z145 engines out there and this would be a great video to watch and would be extremely helpful to those rebuilding their engines.
@BundyBearsShed
Жыл бұрын
I would if I had one but it wasnt an option for here in Australia
@thorthunder3227
Жыл бұрын
@@BundyBearsShed HI, i do not have a book on my Z145 or 134 but do you know the spec. adjustment on the clutch for the PTO backlash? I think the feeler gauge goes behind the hex head bolt? And one other thing if you will let me know about the flywheel bolts. I got mine buggered and wonder if i can just use a single thread bolt instead of the fine thread to coarse thread double threaded bolt? No one here seems to sell them and no one had the nut locks for them either.
@johnambler3107
5 жыл бұрын
G day Lance, loving these videos even though I’m not into tractors. I find the overhaul videos very informative. Don’t sack the camera man sack the bloody sound man. I think he’s had 10 or 15 beers 🍺😊 Great work mate 👍
@BundyBearsShed
5 жыл бұрын
I think he should have 10 or 15 bloody sound, lol.
@timcollins9345
5 жыл бұрын
I finally got some parts for a customers JD630 now I can get the next stage of reassembly.
@BundyBearsShed
5 жыл бұрын
G Day Tim, Parts are often the hold up, thats when a job looses momentum.
@timcollins9345
5 жыл бұрын
Your engine is looking great.
@BundyBearsShed
5 жыл бұрын
thanks Tim.
@isuzumu31t
5 жыл бұрын
G’day Lance, Sorry if this is the wrong area but i couldn’t seem to find a way to co tact you otherwise. I’ve just bought a little only mf65 with a loader which is coming next week and one of the things wrong with it is it is missing the hydraulic ram at the end of the loader the the bloke who owned it before me had just wrapped a chain around it to keep it up. When i was shopping for older tractors i noticed this seems to be a fairly common thing and as i cant find anything on youtube about how to find/pick a replacement hydraulic cylinder thought you might be just the bear to “shed” some light on the matter :) sorry couldn’t resist that one. So im a complete newby to tractors and hydraulics besides motorbike suspension so really dont know the first place to start with measuring the travel of the ram. What are your thoughts? PS: really love your channel and appreciate all the detail you go into, many other presenters in the past have complained how much time it takes to get the angle of the camera right and we all really appreciate the extra effort
@ShainAndrews
5 жыл бұрын
bundybearsshed@gmail.com He has been posting that in the videos. You can also find email information on youtube channels that allow it to be posted. kzitem.info/rock/V7jOffH_nDSiWd8Qsfbrqgabout As for your cylinder you need to search the web based on the loader, not the tractor. That might net you some specifications on that cylinder. Otherwise you have to measure maximum and minimum stroke lengths. You have to specify the end types, the bore diameter, which may or may not determine the rod diameter.
@BundyBearsShed
5 жыл бұрын
G Day isuzumus31t, The loader hydraulic cylinders are often just bought by size. Most have 1" pins then you choose the piston size eg: 2"or 2.5", or 3" etc. I have some listed on my web site that might give you an indication as to what to look for. www.queenslandtractorspares.com.au/Store/tabid/91/CatID/2003/Hydraulic_Cylinders_and_Seal_Kits.aspx That will give you some idea hopefully.
@17volcanic
3 жыл бұрын
Hi Lance, watching your channel from over here in nz. Always enjoyable content. Can I pick your brain...just put my 135 diesel back together after a long sit without oil and it just won't build any oil pressure, any ideas or tricks kinda don't want to put the front axel and pan if there's something else to try. Cheers Richard
@BundyBearsShed
3 жыл бұрын
Try priming it with an old fire extinguisher filled with oil down the oil gauge pipe, that might get something happening.
@acidicbricks6966
3 жыл бұрын
Hey could you please direct me to more lubricating system videos as at college we are doing these would love some help thanks great videos
@BundyBearsShed
3 жыл бұрын
I did one on the TE20 series but try google
@acidicbricks6966
3 жыл бұрын
@@BundyBearsShed hey thanks very helpful
@mat7883
3 жыл бұрын
Hey Lance, what are some of the causes of overly high oil pressure? Just curious. My oil pressure gauge sits right at the end of the white just before the red. This would be considered normal, yes? Cheers Matt
@BundyBearsShed
3 жыл бұрын
No not normal, I did a video on the filter head and in that I explain about the relief valve and filter bypass, you can adjust pressure down with the relief valve and it only adjusts the top end of the pressure not the lower end.
@mat7883
3 жыл бұрын
Thanks Lance! I will take a look.
@duncanrose3891
5 жыл бұрын
We've alway built with the engine oil type/grade that would be running with. Does Moreys go everywhere?
@BundyBearsShed
5 жыл бұрын
G Day Duncan, Yes Moreys goes pretty well everywhere, it gives great lubrication for the short time a new engine can crank while building oil pressure and getting some splash happening. Permatex and others have great engine assembly lube as well.
@johnnygagnon4968
3 жыл бұрын
u got back splash ? what dos it mean?
@BundyBearsShed
3 жыл бұрын
Backlash? space between the gears if thats what you are asking.
@johnnygagnon4968
3 жыл бұрын
@@BundyBearsShed at the end of the video, u said there we go, u need to turn it until oil came back?
@Kermit306TCI
5 жыл бұрын
No loctite on that bolt located at the pickup tube?
@BundyBearsShed
5 жыл бұрын
No it has a spring washer so I didnt bother with loctite.
@Kermit306TCI
5 жыл бұрын
Ah ok, i didn't see the spring washer..my bad! :) Nice serie to watch again :)
Пікірлер: 32