sometimes I imagine an alternate universe where Gunpla review humans and they twist peoples limbs to see how far they go until they break.
@randomuser1579
6 жыл бұрын
Are you on drugs?
@shadowdarkness2345
6 жыл бұрын
Roastus Augustus holy cow that things big
@bladebolt
5 жыл бұрын
Oh
@briancao5793
5 жыл бұрын
Human Gaikotsu
@Z3_R_0
5 жыл бұрын
Roastus Augustus same
@dol_mel7487
7 жыл бұрын
2:50 somebody's feeling sassy today
@fokjohnpainkiller
7 жыл бұрын
Didn't get the joke honestly...
@fokjohnpainkiller
7 жыл бұрын
Nvm, the pose, got it
@pixelman6193
7 жыл бұрын
Jetfire48 grand daddy off his meds again
@ocap3157
3 жыл бұрын
he on droogs
@hollycowitsarat
7 жыл бұрын
Seeing all these seed kits being released for master grade is giving me hopes that someday Bandai may release a master grade Verde Buster and Star gazer Gundam.
@kaiserstorm886
3 жыл бұрын
Bad news bro
@lynncai891
Жыл бұрын
Bad news until now bro
@DarknessNamekaze
Жыл бұрын
until now
@duelgundam
5 жыл бұрын
Fun fact: if it wasn't for Rau, Exia would've been called a "Providence Expy", because apparently the original design for the Providence was using multiple variable-strength beam sabers.
@cocobill0077
4 жыл бұрын
I always felt like the providence was meant to be a transformable unit, with the shield looking so much like a cockpit with vulcan on the side, the shoulders moving to be moved to point towards the ground and the legs using a zeta like transformation
@Arrowdodger
7 жыл бұрын
I can't help but think of REALIZE in GBA chip tunes when Providence would use the DRAGOON map attack in Super Robot Wars J. Glad the Master Grade looks quite good.
@dylanher1668
7 жыл бұрын
love how you added Gundam seed ending 1 at the end of this video.
@aleqthepredator
7 жыл бұрын
You're gonna have to include bits and music from the anime of each different kit, now. That whole end transition was really nice and a good idea.
@MechaGaikotsu
7 жыл бұрын
+aleqthepredator I would, but that could end up getting the videos pulled
@MechaGaikotsu
7 жыл бұрын
+aleqthepredator on that note though I have been considering a second channel for KZitem unfriendly content :)
@ajreyes4296
7 жыл бұрын
I love what you did at the ending. brings back the drama of Seed haha!
@raymondholt6343
4 жыл бұрын
The ending is just good tho 😂👍🏻
@duerf5826
7 жыл бұрын
P-Bandai MG Legend incoming.
@duerf5826
7 жыл бұрын
+octoslut Four. Unicorn, awakened Unicorn, Banshee, and Phenex.
@octoslut
7 жыл бұрын
so??
@AegisHyperon
3 жыл бұрын
yes
@azuzu9813
7 жыл бұрын
Nice touch on the ending !
@jesrelmanarang5371
7 жыл бұрын
Loved that ending song at the end. And I plan to paint my kit hopefully that will fix the loose joints
@JonathanMartinez-ei4up
17 күн бұрын
This kit is dope on its own, but one cool customization option is to kit bash the Providence with the Raider. The Raider’s head with the mouth cannon in particular, but also the side-skirt claws as well as the shield with its twin guns. Both of them have that juggernaut/bulky form that grafts together really well. I love how the Legend Gundam is the more advanced mass produced version of this suit, but the Providence still comes off as the more imposing. Very classic design.
@adicawidasuparman9144
7 жыл бұрын
careful, the music might get copyrighted
@petergreen1994
7 жыл бұрын
Adicawida Suparman as long as it's under the time limit, it's OK
@Ketsu626
3 жыл бұрын
3 years, no copyright
@gtafan110010
7 жыл бұрын
What an absolute tank to look at. My freedom 2.0 has had no issues with any joints *thumbs up*
@andrewestrada6531
7 жыл бұрын
MG Justice is coming on July!!
@oktavian939
7 жыл бұрын
seriously?😶
@andrewestrada6531
7 жыл бұрын
Seriously.
@acrboi
7 жыл бұрын
june
@andrewestrada6531
7 жыл бұрын
Kevin Chan ohhhhhh..... right June.
@kristiantotimsemut571
7 жыл бұрын
seriously? that gundam totally badass in the movie
@grayhattz7096
7 жыл бұрын
Loved the ending. Wish it could've gone on longer. So many memories🤗
@brucewayne3141
3 жыл бұрын
must be copy right issue
@CoTroll
2 жыл бұрын
@@brucewayne3141 what's the song name at the end?
@deZapgate
2 жыл бұрын
@@CoTroll Gundam SEED ending 1
@notsid3
7 жыл бұрын
Imagine custom painting this badboy with some bloody reds and golds and coppers
@ocap3157
3 жыл бұрын
Gundam King
@REmasteredSEED911
7 жыл бұрын
The hip joints are really the issue for me here. I have heard rumors that there are some metal parts for those hip pegs. I just hope they're true.
@LongTran-yv2nq
7 жыл бұрын
Just put the reply here so if someone answers I would know :D
@THEUNDEADSLAYER3
7 жыл бұрын
same as long train that freedom 2.0 looks sick.
@Illsteir
7 жыл бұрын
The metal parts do exist. The problem is it's a bit expensive (about $12 a pair, I think). I know a retailer in my country that may sell it for a decent price if there are enough buyers of the item. They could get a discount by buying it in bulk from the manufacturer.
@THEUNDEADSLAYER3
7 жыл бұрын
Illsteir thanks!
@REmasteredSEED911
7 жыл бұрын
Great! I feel a little more secure knowing that its true.
@Shadowslayer029
2 жыл бұрын
I just ordered in the 2.0, cant wait
@Cheekymonkey405
5 жыл бұрын
I just got Providence MG. I have been waiting for a minute for this Gundam. I haven’t put one of these together since the mid 90’s. Yours looks great & I can’t wait to start mine. It’s my first master grade as well. So any tips would greatly appreciated thanks
@Ally.Cat.252
7 жыл бұрын
I'm going to watch the anime fight of this now it's brought back memories
@waynez78
2 жыл бұрын
I just built the premium edition and I'm surprised that it contains water slide decals for 5 or 6 other models except itself. Wth.
@mitchell9409
7 жыл бұрын
Proper reviews are back hopefully for good
@MeggyXSanji
2 жыл бұрын
That closing is so EPIC !!!
@joeviloria2494
7 жыл бұрын
your videos seem to have developed to be more entertaining now. thanks for the review of this one. my bro just bought one himself and i await his insights about this.
@OneworldOnelove36
6 жыл бұрын
Actually got this (Standard edition) for $45 from a semi local comic shop just because the first thing I asked about was Transformers. And it's my first Gundam.
@crusadercowboy5712
5 жыл бұрын
The resin conversion kit took me a while to finish but just looks so much better than standard mg
@91722854
7 жыл бұрын
compare to the 1/144 model I assembled years ago, this looks jaw dropping!
@hellkaiser7018
7 жыл бұрын
Providence is a pretty neat gundam, especially since it was inspired by the zeong
@kashmerlangston545
3 жыл бұрын
Does anyone else want to see this thing go against the Nu Gundam? It makes sense
@starrieyedGirl
4 ай бұрын
I bought this along with the Zeta Gundam version KA. I rank the Zeta version KA as wood. Likewise I rank the Providence as would. With the Zeta version KA if you try to transform it without parts forming you break stuff. As for the Providence it's head rattles and falls off just with a slight glance.
@oneeyedken6169
7 жыл бұрын
Lol the ending was my childhood
@eldermoose7938
5 жыл бұрын
Never saw seed but this looks pretty freaking legendary
@bluebirdsigma
4 жыл бұрын
Pretty much the most insanely offensive final boss in Gundam history.
@qayyumchariff4357
4 ай бұрын
Before Shinn, this is the other ms that manages to broke Kiras Freedom record of untouchable
@durrellgabrieloliman5427
3 жыл бұрын
for me the backpack looks like a ufo!🤣
@carlosortiz1337
5 жыл бұрын
Just finished building mine, it’s awesome
@MKiiTitans
7 жыл бұрын
my god when the music starts all the nolstagia kickin in
@redsand210
7 жыл бұрын
Those glowing eyes !!! Damn are Bandai's foil stickers getting better or it's the design of he head that slows that reflection? Great review! You have been able to properly replace my favorite reviewer "rrobbert184". RIP let us all bow our heads, and take a moment of silence. LoL
@siklistangchef4543
7 жыл бұрын
Finally a Master Grade kit for the "bad guy" in SEED, i like the Providence its nice and i'll buy one but what i really really really want is....... a MASTER GRADE! Reborns Gundam :)
@fallenrosemary7472
7 жыл бұрын
that seed ending video.... Well played mecha gaikotsu
@soulsobscuretoys6420
6 жыл бұрын
My first MG
@mygunplabuildbyrodnycp3730
3 жыл бұрын
i just finish building this kit..its so awesome..and yes sadly i also broke the side antena behind the vents at the left side.i push it too hard.😂.but gladly i fix it with glue.hopefully it will hold for a long time...and the worst is so many left over parts. I hate it so much..most of them is shared from freedom 2.0..but still its a badass kit..
@muugu_14
7 жыл бұрын
I'm hoping to see an Armored Core kit on here one day. Even though the Armored Core models are expensive as fuck.
@Fuzon-S
7 жыл бұрын
I'm hoping one day you could try your hand at building Zoids kits, the HMM Series to be specific.
@MechaGaikotsu
7 жыл бұрын
+TheElectricHedgehog great, now you've sent me down an Amazon rabbit hole looking at Zoids. I've always been interested in trying one, and I have a small Mirage Fox that's been in my backlog for years. Well, if you see a Zoid pop up on here in the near future you'll know it's your fault :)
@Fuzon-S
7 жыл бұрын
Mecha Gaikotsu Haha, I'll be looking forward! c:
@EzekielWheel
6 жыл бұрын
Mecha Gaikotsu have you done any zoid videos ????!
@solomonkane9499
7 жыл бұрын
The Providence is my favorite Gundam from seed
@parad0x765
2 жыл бұрын
Mecha, Does this kit still hold up?
@SampeText
7 жыл бұрын
damn its been a long time, that ending song tho lol anyway nice review
@PwnageJ
7 жыл бұрын
this single kit could give me a ton of custom colour ideas...
@lavie5104
7 жыл бұрын
Rewatched destiny seed so many damn times.... but yet ask WHO THE HELL IS THE DAMN GOOD GUY
@MrFlunkorg
7 жыл бұрын
Its supposed to be Lacus but she doesn't really do anything so....
@nedinnis6752
7 жыл бұрын
Anyone who's with Kira.
@dyomel3249
6 жыл бұрын
There are no good guys in any gundam series
@garyunwin6537
5 жыл бұрын
@@dyomel3249 did you watch gundam unicorn
@PyroBits
7 жыл бұрын
nice speedy review! I didn't know it was so dark gray, I wonder if it would be possible to paint it all white without compromising all the panel lines..
@mattriarchal
3 жыл бұрын
is this a new version of the mg providence or was it always like this? is the difference just like going from freedom 1.0 to 2.0?
@xecarozx9999
Жыл бұрын
Rau Le Creuset is my favorite character villain all time. People hate each other kill each other get jealous.
@ukopnauykgu3700
4 жыл бұрын
What’s the difference between this kit and original MG Providence ?
@MyCorolla
7 жыл бұрын
I Fond Seed's Gundam, and i was upset they dont make a full cockpit and a siting pilot inside my gundams! i hope they also make like this to mg cherudim or vertue or that orange flying gundam later
@andrewestrada6531
7 жыл бұрын
You know, I'm glade they make the provinces mg and I'm excited for first justice mg.
@zeroxexe111
7 жыл бұрын
nice job on working the ending into your outro
@celestea5678
7 жыл бұрын
Freedom 2.0 is still the best!
@mr.cranker8086
6 жыл бұрын
The providence gundam looks like he's making a fashion statement.
@rakkasandragon2582
7 жыл бұрын
I don't see what he broke :/
@jliu2003
Жыл бұрын
i accidentally squished a little of my freedom 2.0's face mask top vent as well =( it now looks a bit narrower than the bottom vent.
@TRDGE
3 жыл бұрын
The only thing I don't like about this kit is the proportions. You can especially see it when next to the Freedom, the head is so small. If this kit ever had a 2.0 I might consider it.
@damer50
2 жыл бұрын
Damn, imagine a Gundam Legend MG
@astrayred87gundam86
7 жыл бұрын
That kit looks Awesome.
@michaeljonsnow5740
4 ай бұрын
I wish I had watched this before I built my kit 'cause I also broke the one in between the two vents in the face plate. 😂And also I broke one of the dragoons and one part of the cockpit🤣
@harvardford8752
3 жыл бұрын
are the legs holding up? this is one of my fave designs, and so is the nu and hi-nu gundam basically anything with controllable projectiles lol and i really want one
@TheBorsMistral
5 жыл бұрын
Anyone know where one can get a poster of the "regular" edition boxart? Or even a clean, high resolution image of it? It's bloody awesome and I want it large on my wall.
@MrFlunkorg
7 жыл бұрын
You forgot to mention that the special edition does NOT come with water slides for the providence. The water slide sheet is for other seed kits. Its worth pointing out, because AFAIK, they don't bother mentioning this on store pages most of the time.
@terutend077
7 жыл бұрын
he pointed them out in the unboxing
@MrFlunkorg
7 жыл бұрын
A lot of people will only watch this video and not the unboxing. I'm not trying to give anyone shit, just worth pointing out. Kits are expensive and bandai kinda dropped the ball on properly informing people on what the special edition actually comes with.
@terutend077
7 жыл бұрын
yeah I know Bandai's pretty shitty with how they are really. I wish they'd stop with the P-Bandai crap
@beldin3013
7 жыл бұрын
And the actual water slides are p bandai exclusive, cheap a#%, money grubbing bandai. I'm a little butthurt
@arandombirdwhogotinterneta2240
3 жыл бұрын
Is the only difference between the premium Providence gundam and the normal Providence gundam waterslides and a special base?
@ang9222
7 жыл бұрын
Forget the devil art lock off sh t
@homeboytrt
7 жыл бұрын
Newbie Question, I wanted to get into building and im wondering which Grades should I focus on if I wanted to Mix with Frame Arms ?
@akimmohd946
7 жыл бұрын
love the ending..thumbs up
@muhammadarajan2808
7 жыл бұрын
could you tell me what is the different between the standard version and the premium edition? Because I'm planning to buy this gundam
@coolslc
6 жыл бұрын
Do you know what the use of the square piece in the clear black runner is for? Thanks...
@itshafizlah7128
5 жыл бұрын
I really made a mistake attaching the black separate fins beside the head omg 🤦🏻♂️ .......and igluedthem at the wrong place 🤬
@fatbastard9147
4 жыл бұрын
That’s the beauty of it it’s your providence gundam
@LordTouchMeMore
7 жыл бұрын
Man I just got the freedom now i want this, im tryina get 1 MS from each frnachise but its hard
@Arturchik899
4 жыл бұрын
I wish they make metal grade providence .
@chandrameijin2876
3 жыл бұрын
Providence gundam badass !
@karloverg
7 жыл бұрын
nice review looking forward to get mine soon, as for the issues i have the freedom 2.0 and i would say the joints especially on hips are still fine until now, if builders took the time to figure out how the joint system work before rushing in by moving them they wont have to worry of breaking it. for what i did to my freedom 2.0 is i fidle with joints on the hip a bit moving it around without the entire leg, this way the joint loosen up a bit so when you pop in the leg to joint the whole joint moves smoothly.
@jasonlee3327
7 жыл бұрын
That's not the issue with the joint though. Most people break them snap fitting and removing the leg. The joint is far too tight on the leg and most builders instinctively try to twist the leg to try to get it off when it doesn't budge. That twisting motion stresses the plastic and shears the joint off sadly...
@amirazhar8377
7 жыл бұрын
Love the ending song..haha
@flaviuskenneth2232
4 жыл бұрын
I'm buying the normal one. Is the normal one bad? Idk if there is premium one 😔
@gn6thgreed759
7 жыл бұрын
that a good ending review. keep it up.
@anc2627
5 жыл бұрын
Can make a review about RG Aile Strike and RG Skygrasper
@matzer1110
6 жыл бұрын
Whats the difrence between premium and normal one
@TheLeyva5000
7 жыл бұрын
The vents on the shield look really nice. Did you put some weathering on them or is it a sticker?
@MechaGaikotsu
7 жыл бұрын
+David Leyva just used a panel liner and a q-tip
@ZGMFXGN0042
5 жыл бұрын
kinda odd Providence have two vented moutipiece while its Sucessor Legend Gundam lacks it.
@nullpointer66
7 жыл бұрын
what is the difference between the premium and the non premium?
@foxwolf1509
7 жыл бұрын
Not compatible with Strikers Packs? Challenge accepted!
@ariq45
7 жыл бұрын
thats the best betailed gundam so far
@user-vl6qf5dz5n
4 жыл бұрын
if this is the same as a freedom 2,0 is it also a gold tear ?
@pauljordan0203
3 жыл бұрын
I own that master grade kit, except it had a different box cover.
@setsunafseiei4480
3 жыл бұрын
Yours is the normal version, thats why
@pauljordan0203
3 жыл бұрын
@@setsunafseiei4480 ah, I see, as cool as the Providence is, I still am a fan of ther cool looking gundams, such as the Exia, and the Gundam 00.
@hazimarif9042
7 жыл бұрын
When The shield attach to the gunpla's back it look like a TURTLE
@dcunningham7690
7 жыл бұрын
The providence Gundam has a close resemblance to the Legend.
@Red-nw2yn
7 жыл бұрын
D Cunningham Its actually legend resemble Providence/copyng providence
@kevinabat6426
4 жыл бұрын
7:30 hahah i broke that exact part right there.had to resort in using super glue, got them re attached but the poses i can do is limited. need to be xtra careful on the other leg.
@eraniogem22
3 жыл бұрын
You can buy metal replacement for that one
@kiripitt4642
7 жыл бұрын
TQ for review!
@lilnugget325
6 жыл бұрын
I don't watch seed but I swore I heard Judaism Beam rifle at 3:17, that should be Hitler's favourite weapon.
@garyunwin6537
5 жыл бұрын
HANS GET THE GUNDAM
@bluebirdsigma
4 жыл бұрын
Considering Rau wanted everyone to holocaust each other...
@dhafinpratama1355
7 жыл бұрын
leg articulation joint is very fragile..believe me..i broke my freedom 2.0 leg articulation..and the problem is the providence gundam had a same inner frame like freedom 2.0
@ZapZephyrX
7 жыл бұрын
Whats the music used for the review ? not the end part .
@joshlincoln3184
7 жыл бұрын
Does anyone know when he's gonna make top 10 MGs 2016
Пікірлер: 332