Thanks for the well explained video, mine arrived yesterday, i had it up and running with Alexa in 30 mins, so far it is flawless
@PreliminaryFilms12
4 жыл бұрын
Twin blade you’re welcome, please subscribe. Mine still working perfectly. I have some other ideas for this :)
@ganeshbala
Жыл бұрын
Great video! Installed with relative ease. Navigating the app for initial set-up took a little longer than expected. Thank you for the details!
@tiberius8390
Жыл бұрын
Thanks for the video. The only thing that bothers me (very) is that you have to register in the app to use the wifi relay...
@ELBENDC2
3 жыл бұрын
Can I connect a sensor to let me know when the door is open or closed, and which terminal, should I use?
@SnowyPe
3 жыл бұрын
Followed your advice and it works fantastic..Thanks for the vid
@PreliminaryFilms12
3 жыл бұрын
You’re welcome! Please help my channel by subscribing 👍
@IseeIrony
3 жыл бұрын
Thanks for explaining the buttons, the "manual" was pretty worthless for that. However, when pressing the left button, my LED doesn't stay lit. Therefore, pushing the right button is only momentary like in your video. I wonder if there's something I'm doing wrong or if I might have a defective unit?
@SwordMasterTala
24 күн бұрын
voy a comprar uno de esos. se ve bueno
@user-dl123
6 ай бұрын
Many thanks. It saves my day!
@philipperostin
2 жыл бұрын
My garage opener did not work by shorting neither of the cables. But if you buy a cheap remote and pair it with your door, then solder wires to the push button of the remote pcb and connect them to the wifi relay, it works a charm ! Also, to remotely start computers, its brilliant, cheapper than switchbots pos that are never connected correctly !
@slackert9x
2 жыл бұрын
Great video. Straight to the point
@scottwinterroth
2 жыл бұрын
Can you set a longer delay for the tigger? I want to use it on a apartment door buzzer.
@stevebowlin2831
4 жыл бұрын
What have you connected your usb cable to for power Can I use a phone charger adapter
@PreliminaryFilms12
4 жыл бұрын
Steve Bowlin yes, that’s what I’m using. Mini usb
@syedmohammadazarudinabdulr6442
2 жыл бұрын
I followed your instructions and my relay works but rig turns off immediately after turning on what could be the issue do I need to change any settings in bios ? Or is it an issue with the relay device?
@TimSaundersC4
Жыл бұрын
Curios what thickness of wire will fit the chip?
@frankcaccamo3568
3 жыл бұрын
Can I add a sensor to trigger something lights on and off. I’m not sure what to use this for. I need flashing 12 v dc lights to flash on a construction site. Can I add a sensor and lights to this.
@normdichiara7836
Жыл бұрын
Is it possible to use this relay to interrupt the continuity of a wire to interrupt a circuit, open or closed? There is no voltage in the circuit.
@AceBoy2099
11 ай бұрын
Yes, there's 3 pins for the relay. No (normally open), com (common), and nc (normally closed) just wire accordingly, those terms are referring to at rest so with no trigger the com and nc are touching, when triggered the com and no are connected.
@Jesse-tw8rr
2 жыл бұрын
No one is saying if you’re able to hold the relay on a timer??
@richardhannay9871
4 жыл бұрын
Thanks for this. Assume the old switch on your wall still works to open or close the garage door?
@PreliminaryFilms12
4 жыл бұрын
Richard Hannay I had 3 options. Connect to 1 garage remote 2 wall button inside garage 3 connect straight to motor/device where cables from button connects. 👍 Please subscribe to channel Thx 🙏
@AceBoy2099
11 ай бұрын
For older "less secure" units you can hardwire direct to motor on ceiling or button on wall and it'll work, check by bridging the pins on your motor with a paperclip and if the door opens/closes you can. I have a newer "more secure" unit so I had to buy and solder to a remote to imitate someone pushing a button on your cars visor. Works flawlessly. Now with led lights in your garage your results may vary.
@michaelmeehan7300
3 жыл бұрын
Hello! I'm having some trouble with my devise its staying offline not connecting to wifi but the wifi is working fine, I moved the devise but am now back at original spot and can't connect anymore I mind new account and connected devise to phone but iys offline not connecting to internet not sure what to do
@jakudo
4 жыл бұрын
Hi, has it a dry contact for the garage door?
@PreliminaryFilms12
4 жыл бұрын
jakudo on this piece you have 2 options, dry for this scenario and wet if you want to use it for lightbulbs etc
@jakudo
4 жыл бұрын
Preliminary Films so when it is set as garage door opener it has a dry contact?
@ivancalderon110
2 жыл бұрын
Hola dónde comprar la tarjeta
@ivancalderon110
2 жыл бұрын
Dónde lo consigo
@paulhyland3528
3 жыл бұрын
Hi has anyone flashed with tasmota?
@Temppy1
7 ай бұрын
nice 240sx
@inspektor.
Жыл бұрын
Does the ewelink application on your phone ask you for a login-password for access app after 1h-2h in the GSM network?
@christianrobertadzic9321
Жыл бұрын
Wooow! How crazy is it to give your home network setup and the pass also to an unknown person/company/server name it as you wish. Do you consider how secure is what you did with that little gadget? You maybe exposed your whole network to an unknown persone... Think about...
Пікірлер: 35