I swear I'm studying all of your videos like I'm back in college and working on a thesis and they're very valuable so that k you for your effort
@AndySjostrom
4 жыл бұрын
Hi youtube posted your channel as a suggested watch on my listing. And now I see why. I'm 62 and through my 30's and 40's I was in to land based RC's car, truck, and boats. never really took much interest in flight. But over time my daughter grew up and had three children of her own the youngest one my grandson age 6 has mastered everything I've given him land based in RC and done it is just about a week. his eye hand coordination is amazing to say the least. So I'm thinking the next step for him is flight. I've sat down with him and picked out two planes the first one his is the AeroScout S from horizon hobbies. it's got the safe mode which Ithink is a really great thing for a beginning pilot. and for me since I have Zero flight experience and the belief that bigger is better. I've been looking at the Carbon Z Cub SS. for the same reason as it has the safe mode built in. I'm hoping to get both planes and everything needed for our first flight together by Christmas this year (12/2020.) I'm now listed as a subscriber on your channel and the bellring when you post something new. however I do plan to go dig around in your other video's you done for more instructional videos about this 3d flying and to learn as much as I can so that I can teach my grandson what I learn from you. oh and that's a really cool looking plane you have in the video's.
@daggad02
10 жыл бұрын
I have learned more 3D from Michael Wargo's tutorials than all others combined. Instead of "move the sticks like this" he has an approach that teaches you how to get the correct feel for the airplane. And once that start to settle a whole new world opens up ! Believe me guys, listen to very word carefully. Thank you very very much Michael !
@Synthetic11
10 жыл бұрын
Thank you Michael for your hard work on these videos. They are great instruction and really do further our hobby.
@thereal-stl_slim
Ай бұрын
When Michael is saying buoyancy picture the Atoms in the air being water and your plane is floating through it. The same way you feel Atoms when you stick your hand out of the window of a car you can feel the buoyancy moving your hand up
@yourpotentialism
9 жыл бұрын
Thank you! From listing to these vids I went and did my first harrier, hover and knife edge, all in one flight, now I just need to practice to get it less sloppy now. SO A BIG THANKS FOR SHARING!!
@gilbertstellezsr5518
6 ай бұрын
Can’t wait to go the field
@carlosalbertoperezmoreno9971
7 жыл бұрын
Awesome video man. Thank you very much for taking time to share your knowledge.
@toast47624
8 жыл бұрын
Thanks Mike. I picked a several tips from this. I appreciate you taking the time to make these vids.
@reckemroysrc3764
7 жыл бұрын
thanks for all the tips Michael I am working on more use of the left stick it is though to train yourself to do things like this so I have decided to learn the wargo way I watch all your videos to get the best advice your awesome keep up the great work 😎
@BARFtheNAR
10 жыл бұрын
Amazing Tutorials! Keep up the great work.
@fisherboom
10 жыл бұрын
Nice work Michael.
@Wings_of_foam
7 ай бұрын
I love the 80´s colors!
@PagesFlyingCircus
10 жыл бұрын
Thank you. Very informative and right down to the basics.
@pierreloeb305
9 жыл бұрын
Thank you for the video , the best teaching video I saw , as you say long slows rolls !!!
@crossthreadaeroindustries8554
7 жыл бұрын
Great share even though a few years old. I am surprised you fly without a strap and with thumbs. I would think that pinch using a strap provides more support for the maneuvers, except maybe you are faster with just thumbs.
@zubuxstein
6 жыл бұрын
CrossThread Aero Industries // it comes in natural, will be the day you are flying and all of a sudden dont even realize its not on the neck. A transmitter is held like a real gun, gently, stick movement the same as the trigger, feather it.
@kevinfm122
6 жыл бұрын
it would be so cool to build a clear plane with a painted frame
@flyindaily
10 жыл бұрын
Awesome again!!!!! Thanks so much for your good work
@UranthaiBrothers
9 жыл бұрын
Very useful tips, Sir!
@teampullmyfinger3036
6 жыл бұрын
Such a Great video!I hover in my kitchen right in front of my nose for a battery but I sure as heck needed that coaching on the rest. this was awsome! Thank you!! Caching! You should have a Tip Jar. hmmm not a bad idea?
@Jweiss7939
4 жыл бұрын
Great video!!
@septik101
8 жыл бұрын
these are so helpful. thank you
@paulsimpson8578
Жыл бұрын
Hi Michael. It looks like your transmitter is mode 2. I fly mode 1 - elevator and rudder on left stick, throttle and aileron on right stick. My question is - let’s say I was flying mode 4 so throttle is still on the left, am I making it more difficult to fly 3d having aileron and rudder swapped over compared to your set up? I recently bought a second hand XL and am slowly getting there
@MichaelWargo
Жыл бұрын
HOnestly, I do not really know if it is more or less difficult. I really don't. I am sorry. Maybe someone out there knows.
@johnriley7423
9 жыл бұрын
"These are ALL throttle management skills" LOL.
@thedoeverything418
3 жыл бұрын
the "flip turn" and knife edge spin are NOT throttle management skills lmao, I noticed that to. i do KE spins and flip turns all the time and the throttle stays the same
@Abderrahmane_Aitouche
3 жыл бұрын
Michaël war go ...........👍💌🇩🇿 Merci pour ces explications
@SportbikeUnitedRiderz
5 жыл бұрын
I've been practicing on the RF8 big time. An average how long does it take to get the skills to be able to hover?
@dominofpv1885
4 жыл бұрын
I finally did a tail drag today wild herring across the yard with my crack yak😄🎉🎊 not bad for a Domino's delivery guy
@paleomanjim
10 жыл бұрын
No doubt the most helpful video I have seen yet on 3D! Your explanation and analogy are thought provoking and very helpful for this stage of my training. I will be watching this again! One question regarding hover and throttle management. When I hover I usually harrier to where the plane is directly in front of me and I am looking at the top of the plane, then a bit more elevator to bring it vertical with just enough throttle to hold it or allow a slight rise, then it seems I need the rudder the most, followed by small amounts of elevator and slight aileron correction to keep the top of the plane facing me, with very little throttle adjustment. I can usually get a 5-10 second hover before it all falls apart. Should I be focusing more on the throttle? I will try that next, thanks....
@scaneagle62
2 жыл бұрын
Are you trimming when your flying around like that, because I keep hearing the clicking?
@MichaelWargo
2 жыл бұрын
No... The sound you hear is the timer turning on and off when I hit near zero throttle.
@fmata5
8 жыл бұрын
What is clicking on the radio? Great job
@Neurotripsicks
6 жыл бұрын
Do the wings come off easily for transport? I'm thinking about getting this plane. Thanks.
@randywood4782
4 жыл бұрын
Thanks 😊
@Abderrahmane_Aitouche
4 жыл бұрын
Bravo les ingénieurs.
@user-tp6mq9ke8s
3 жыл бұрын
Super !
@parkerbirch1635
7 жыл бұрын
Wow now i can do it I just watch this.
@786free1
5 жыл бұрын
At what stage is it best to throttle up when doing the rolling harrier? Also is it the elevator that keeps the plane complete the circle? Do you pull up on the elevator when the plane is on a knife edge travelling from right to left with its canopy facing you? Do u then give it down elevator when ths plane is on a knife edge with its underside facing you?
@MichaelWargo
5 жыл бұрын
The throttle is subjective based on whether the plane begins to fall. No real formula. All feel. As for the turn, it is generally a result of early input. i.e. as you are rolling right, if you apply left rudder a bit early it tends to turn the aircraft, same with elevator. That is why the rolling harrier turning is easy, staying straight is a trick.
@786free1
5 жыл бұрын
@@MichaelWargo thanks
@old-rcplane-phart
3 жыл бұрын
For 3d flying, do YOU prefer less or more pitch for YOUR props? (That has forever confused me). Thank in advance! 👍 New subscriber!
@MichaelWargo
3 жыл бұрын
Larger with less pitch. The larger the prop the more prop wash hits the control surfaces giving you more control when in a stalled or harrier configuration or hovering.
@MichaelWargo
Жыл бұрын
Sorry, just saw this... Lower pitch for sure!
@Mindcoach1on1
8 жыл бұрын
how nose heavy do you set this plane or do you set it about dead center
@awesomefacts3377
7 жыл бұрын
which type of airfoil was that
@andrewjackson7476
6 жыл бұрын
Some kind of fully symmetrical. Thinner version, cuz you never really develop any big amount of lift from airflow alone, cuz the low speed. It's mostly angle of attack, where you get the lift.
@oscarzt1652
10 жыл бұрын
what transmitter are you using and why was it beeping when you were blipping the throttle at the beginning
@mickvk
9 жыл бұрын
flight timer can be set to start/stop at x% of throttle. Especially useful for glider fliers. It sounded like that was the beep on throttle.
@DZWK86
8 жыл бұрын
+FirewoRc [Rc airplanes and more...] I would never rely on spectrum
@mickvk
8 жыл бұрын
+Cold World That's so unhelpful. That's the equivalent of a boy pissing on a ford/chevy logo.
@vista2611
2 жыл бұрын
Hi Michael, my name is Mike and I am flying for 25 years and I did like slow 3D , but I was familiar with methanol engines of those days, I saw your amazing video which rose my love back , may you advise how I can get the same model and radio of yours without hassle as I am not familiar with these days packages. I appreciate a lot for your help , I am in Vancouver Canada 🇨🇦. Thanks again waiting for your advise MIKE MOHIT
@MichaelWargo
2 жыл бұрын
Please go to this thread on RC Groups, then you can Personal Message me and I can answer your questions. www.rcgroups.com/forums/showthread.php?1968864-1-2-3D-How-to-fly-3Dwith-Michael-Wargo/page636 PrecisionAerobatics.com you can find the addiction, but the radio I use might be a bit much, we can chat on that forum. Also, the forum is a great resource for learning. You will see
@siddharth4662
4 жыл бұрын
which plane model is that?
@pukki34
9 жыл бұрын
Great video. Its really hard to push your own limits in rc and learn 3d. Most sport flyers just stick to flying large circles...
@SuperTheStream
4 жыл бұрын
what is that for a model?
@pete2109
8 жыл бұрын
Can you fly mode 1??? Alot of people in the world fly mode 1, Is there any chance of doing a vid in mode 1? Thank you.
@oscardanielquintananoguera6316
6 жыл бұрын
Where are the plans?
@LowLightVideos
10 жыл бұрын
If 3D Airplane flight is all "Throttle Management" is there no means to fly level with the Transmitter setup for Aircraft and when one wishes to transition from 'Aircraft Style Flight' to 'Helicopter Style Flight' to simply flip a switch on the Transmitter and switch to 'Helicopter Layout', then the Plane would be controlled with the "ease of a Helicopter" (not simple, but not impossible; and far more logical for what you are trying to do). Or, would that take all the fun out of it, to simply have it be as easy as a Helicopter to fly ... I don't get that as it would imply that you'd want to make travelling forward in a Helicopter a challenge; and who does that. Is it a case of that a Helicopter has a "Flight Controller" and GPS, and that you do those functions using your brain and the transmitter. Is that the trick of this that we are to appreciate ? Precision control without using a Flight Controller (CPU). ?
@phasA100
8 жыл бұрын
Maaaan... I would like to see the EXPO Settings on the DX18 up close!!! :)
@MichaelWargo
8 жыл бұрын
+Donny Brandy I have a few documents out there showing my exact settings and how to set up your planes. Go to RC groups or any of my sponsors' sites. IT is Michael Wargo's set up guide. I use between 50 and 70% on 3d rates depending on plane, but switch between rates fairly often when I am flying more precision stuff.
@phasA100
8 жыл бұрын
+Michael Wargo I just found youre rcgroups Thread. Especially the document on Mixing is remarkable. I was curious about the use of mixing! Thx!
@ClickingHeads
8 жыл бұрын
what is that clicking noise when flying?
@steveemary4447
6 жыл бұрын
Having the timer set at 25-30% on the throttle also gives you that telltale beep when you approach minimum controllable airspeed. Perfect when flying at or just above the stall speed of your aircraft.
@NETBotic
6 жыл бұрын
It also sounds like he is changing his expo.
@apatt75
5 жыл бұрын
That sounds like him trimming it but I'm not sure
@kevingoza
5 жыл бұрын
Hey Mike, I understand you live in Florida. I fly at Tangerine Field, RCACF in Apopka/Orlando. Are you nearby? Would love to invite you to fly with us sometime. Perhaps you’ve been with us before.
@MichaelWargo
5 жыл бұрын
I am in Orlando, and yes I have flown there many times. More than a few friends there. I fly at Irks, moonport and New smyrna mostly. I live in Heathrow. Reach me through a PM in rc groups and maybe we can connect!
@kevingoza
5 жыл бұрын
Michael, I can’t find you on RC Groups. Tried searching. Don’t know your screen name there. Sorry!
@kevingoza
5 жыл бұрын
BTW, I’m on RC Groups as Bkg1956.
@MichaelWargo
5 жыл бұрын
Send me a youtube message... OR there is a very popular thread on RC groups called how to fly 3d with Michael Wargo It is sticky'd and everything. I will give you my regular email.
@kevingoza
5 жыл бұрын
Gotcha. Thanks!
@jacksonfrazao5170
4 жыл бұрын
oi michael tudo bem??? como faço pra adquirir um aero desse com esse Setup top!!!! voa super lento e faz um exelente voo 3d.
@clintcollins
9 жыл бұрын
is this field SPARKS???
@CV_CA
4 жыл бұрын
Anybody knows the name of this airplane?
@MichaelWargo
4 жыл бұрын
It is the Precision Aerobatics Addiction XL
@CV_CA
4 жыл бұрын
@@MichaelWargo Thank you. More and more I think, I have to have one. :-)
@joshsutinen8995
3 жыл бұрын
I have that plane
@fahimwon4661
4 жыл бұрын
12:10 . You could show us controller & plane at the same time by split screen !! but you are a Bad youtuber -_-
Пікірлер: 82