Youre guys are Great!! I am flying about 2 month... started with a Tundra... now pactising with a mx2.. youre videos gives me the key to understand the basics. And ist works great!! Thx
@fox5136
7 жыл бұрын
spot on Michael ,been flying 25 yr and still trying to 3d. Your vids are the best ive found for help thank you.
@enriquekramer4590
10 жыл бұрын
I think these three videos are the very best I have had the pleasure of watching regarding 3D instruction. Thank you so much Michael!!!
@Fra42below
10 жыл бұрын
great job again Michael. 3D is very complex and needs hours and hours of lessons like these, but you managed to sum it up pretty well with lots of precious advice.
@craighart4513
10 ай бұрын
I need help taking off, please.
@craighart4513
10 ай бұрын
Thank you for the videos , they helped me out to landing, knife edge, and rolling slowly.
@joepereira3250
9 жыл бұрын
Hi Mike, Just wanted to thank you for stopping by our club today it was a pleasure meeting you and we all learned something from you. Thanks again Joe.
@jimbo57109
9 жыл бұрын
thanks for that you have given me more confidence to take up flying and not to worry about crashing
@TheAlpenBrosEst
5 жыл бұрын
Reminds me of the old Rocket City and RC World days! Good to see ya Wargo
@MichaelWargo
5 жыл бұрын
I would love to know who this is... I obviously know you and haven't flown with you for years!
@rickhead332
10 жыл бұрын
One of my "light bulb" moments years ago when learning to Prop Hang (aka Hover) was realizing that the plane need not be straight up and down. Try Hovering with the Cowling over the Canopy and it will synch much better. My $0.02 Worth ~R~
@Thedaveyht3
4 жыл бұрын
Great video series. I have been flying 3d plank and heli for about 10 years and you helped me understand some concepts i didnt know about thank you. also please tell us about the trim clicks. throttle? on the knob? please inform.
@mondials
10 жыл бұрын
Agreed as always a great video!!!!
@MrNkemper
7 ай бұрын
Great flying and teaching ! Wondering Why do you touch the airplane in flight ? This is very dangerous especially for beginners.
@MichaelWargo
7 ай бұрын
I really only do it because catching it and that control has been a signature thing. Yes, is dangerous and you are right, it is really just showing off and I shouldn't...
@stevewilkins27
10 жыл бұрын
I like that you liked your video,, Michael
@funsmasher7018
3 жыл бұрын
Your flying videos are great. I wish there was a way to see your stick movements as you are going through the different moves.
@neomayad
9 жыл бұрын
what kind of plane is this?
@devinreed2003
3 жыл бұрын
Thank you
@karstenramcke6637
3 жыл бұрын
Very helpful, thanks
@Abderrahmane_Aitouche
3 жыл бұрын
Bravo ......war-Go 😉
@BARFtheNAR
10 жыл бұрын
I love your videos! There are some excellent tips that you mention.
@JasonUberig
10 жыл бұрын
Hi Michael... in regards to the throttle 'blipping' that seems synonymous with low harriers and such, have you ever experimented with altering the throttle curves either in the transmitter or the ESC's to provide a smoother transition from, say, 10% thru 90% throttle and then leave the power spike from 90 - 100%? I've noticed a number of ESC's have a 'burst' at around 60 - 70% throttle. I find that's my sweet spot on my planes for hovering and other maneuvers. As I was playing around with some multi-rotor firmware (another branch of the hobby I enjoy) I thought, "why not try a multi-rotor curve on a 3D plane?!" The throttle curve on a multi-rotor ESC is typically much smoother throughout the range with that 'burst' happening closer to 90 - 100% throttle. I was amazed at how much easier 3D moves became when throttle was more tame and consistent. Sorry for the long-winded response... I was just wondering if you'd had a chance to mess with throttle curves and/or if your experience with them was good or bad? Thanks a bunch for all your vids... very helpful and informative!! Cheers, J.
@MichaelWargo
10 жыл бұрын
I have used throttle curves for gas engines, and occasionally electric to smooth things out or put the sweet spot higher on the throttle, but whatever works for you. Usually, it is to avoid having it too jumpy. LIke one click from not enough to too much. BUt electrics usually smooth out with better prop.
@JasonUberig
10 жыл бұрын
Michael Wargo Thanks for the response. I haven't flown much in the way of fuel based engines... a couple 4 strokes. Too messy for my tastes :) and the gassers I haven't moved up to yet. Interesting bit about the prop smoothing things out for electrics. Do you prefer wood vs. other materials or does it vary based on application? Cheers, J.
@MichaelWargo
10 жыл бұрын
Jason Uberig Varies based on application and the plane/motor.
@JasonUberig
10 жыл бұрын
Michael Wargo Thanks.... again, appreciate the responses.
@zacharynevarez2997
3 жыл бұрын
"We have some crazy convections from nearby trees that are turning the plane" lol like when my "transmitter dips in signal so my hover screwed up" hes great dont get me wrong just makes me giggle when guys have a hard time saying oops screwed that one up.
@aleeexxx9
2 жыл бұрын
Which model of plane is this? and which brand?
@otisskopik1400
8 жыл бұрын
great tutorial. what are these beeps from the transmitter?
@AphexTwinII
4 жыл бұрын
Turn on and off his gyro
@jameswhite-vw3gp
6 жыл бұрын
I keep hearing trim clicks what are you not telling us
@Thedaveyht3
4 жыл бұрын
yes im interested as well.
@daveyfromdownsouth7889
4 жыл бұрын
For me hovering is kind of like a helicopter where you never stop touching the controls.
@MrJunganaught
9 жыл бұрын
Firstly I'd like to express how helpful these videos and the others you have done around 3D and sport flying have been, I think I've watched them all a few times over now! I just built my ADXL and maidened it on Tuesday. I couldn't believe how tame it was on low rates but also how mental it could be on high rates. I set up everything as per the manual and Hans' very VERY helpful build tips videos (they supplemented the manual to perfection!). (the maiden video is on my channel) My question is regarding CG position and which prop you use/prefer. I have my CG right around the middle 164mm as was recommended in the manual. Do you have all 3 CG positions marked in the battery tray and would you change prop based on the CG position, weather and/or both? i currently only have the 164mm position marked and am running the Vox 15x8. Any advice you can give would be greatly appreciated! Thankyou
@dennisprice7923
9 жыл бұрын
cheer's guys brilliant
@stevensocci8209
4 жыл бұрын
Curiosity question, did you guys just finish or heading to play 18?
@dennissmith7055
4 жыл бұрын
I think a lightbulb went on.when I try knife edge I forget to use the throttle for altitude mgmt.and I need to remember the rudder becomes an elevator
@craighart4513
10 ай бұрын
I need help landing on the run way .
@HobbitHomes263
5 жыл бұрын
Just recently started watching 3D videos. One maneuver I haven't seen yet is a knife-edge loop. Is there anyone doing that?
@Neurotripsicks
6 жыл бұрын
Hey Michael. I really love your channel. Subscribed. I'm learning 3D right now and this is helpful. One question though. What are the beeping sounds you are using? Does the plane have a gyro? I hear those beeps on other videos too and I think it's crucial that I know what they are. Thanks in advance.
@MichaelWargo
6 жыл бұрын
It is not a gyro... LOL. no gyros for me. The sound is a throttle on and off. It beeps when it turns the timer off at zero or near zero throttle. Just a radio setting.
@Neurotripsicks
6 жыл бұрын
Oh okay gotcha. If it's not too much trouble, could you recommend a good starter electric 3D plane? I bought a flight simulator and I have been practicing my orientation and other things. I am fairly new and I have flown a few times on my regular planes. Thanks man.
@flyinghobby9571
4 жыл бұрын
Hi sir, I HAVE YAK 54 20CC DLE ENGINE PLEASE ADVICE WICH SERVO INSTALL DIGITAL OR ANALOG AND HOW MACH TOURQUE KG THANKS I WATING YOUR REPPLY
@craighart4513
10 ай бұрын
I need help landing, and knife edge flying.
@MichaelWargo
10 ай бұрын
Just type wargo landing and wargo KNife edge. I have good vids on both
@craighart4513
10 ай бұрын
I need help landing, and knife edge
@craighart4513
10 ай бұрын
I need help rolling slowly.
@alvoisine
10 жыл бұрын
Coming from the heli side of things and likely a different radio, I would like to know what are those beeps we hear while you're flying. Seems like there is something going on that you aren't sharing... just kidding, but I would like to know.
@MichaelWargo
10 жыл бұрын
It is my timer turning on and off...
@alvoisine
10 жыл бұрын
Michael Wargo That's disapointing! I was expecting something much more interesting....LOL
@rasectolentino01
9 жыл бұрын
Michael Wargo sorry for asking, wasn't it the trimming sound of the tx? or it's your secret in flying?
@MichaelWargo
9 жыл бұрын
It is the timer turning on and off from the throttle going to zero
@kennewthlogsdon9437
2 жыл бұрын
Drone
@wernermoser3406
Жыл бұрын
Messerflug heisst das!😁😁😁
@andyMSH700
2 жыл бұрын
its all about using a flight simulator before you try anything like this otherwise you will be buying another model...then these tricks are easy.
@RBAERO
8 жыл бұрын
Good instructions. But really bad filming
@psiturbo
5 жыл бұрын
stop the excuses, there is no wind, you need more practice and simulator time... just kidding! I watch the plane in super slow mo to see his corrections
Пікірлер: 58