Tools you will need:
Ruler
Spirit Level
Cross head screw driver
Clear all-weather sealant
The screws and caps provided
SureFlap Pet Door mounting adaptor
Please contact a qualified glazier or Pet Door installer to discuss your specific glass fitting requirements. Fitting into double or triple glazing will require a new pre-cut pane to be purchased, cut and fitted following the steps below.
To fit your Pet Door into glass, you will require a circular hole to be cut measuring 300 mm or 114/5 inches in diameter. This will need to be done by a professional glazier.
To ensure your pets have unhindered access through the Pet Door, you will need to make sure that this circular hole is cut at the appropriate height. Do this by first measuring the height of your pet’s tummy from the floor.
Take this height and add 120mm to it (43/4 inches), this will give you the total distance from the floor to the centre of the circle you need cutting. Make sure this point is at least 200mm or 8 inches from the bottom of the window frame to allow room for the mounting adaptor.
Pet’s tummy height + 120mm = the centre of the circle.
If you are fitting in a double or triple glazed unit, ensure the glazier uses a non-metallic spacer bar around the hole to seal the layers of glass. A metal spacer could compromise the Pet Door’s ability to read microchips.
Before you begin, we advise that you program your pet(s) ID prior to fitting. See: • Programming a pet into...
surepetcare.com
Негізгі бет Үй жануарлары мен аңдар Microchip Pet Door and Microchip Pet Door Connect - Glass Installation
Пікірлер