They’re my favorite OTFs because I love their aesthetics. I also love that they use Elmax and M390 instead of more everyday steels. I think they’re the top OTFs on the market just by an inch for that reason.
@mushtrip1
6 жыл бұрын
I'm not a fan boy for any brand, but I do have to say that just like an m16 or m4 vs the AK 47...having owned all 3 and many knifes...there is a reason why the Ak is harder to jam and stop in most cases than the other...if your tolerances are to tight and there is no play, then you get gunked up and jammed up quicker
@RealR.J.
6 жыл бұрын
For me it’s all about the look. Every Microtech you showed looked better than any other knife you showed next to it. Microtech makes the prettiest OTF to me.
@herbertmasing
4 жыл бұрын
Spot on.
@donttrip4228
4 жыл бұрын
Nah looks is someone’s preference. I don’t like the look of the utx85 , and has all that shiny big hardware too showing .. LOVE the FDE phaeton and simplicity/classy look of it and therefore went with that instead. Just hope it proves to be reliable
@donaldcooper4330
4 жыл бұрын
And uses much better steel
@Airplanetyson
8 ай бұрын
Beauty is in the eye of the beholder
@davidsolis1128
Ай бұрын
i agree . slim.
@richardkendra135
6 жыл бұрын
MICROTECH does put out more blade configurations and variations with their otf’s. Single edge, double edge, tanto, etc. They also use different blade finishes like satin, stonewashed, mirrored, blackout. They offer two-tone with or without full serrations or semi serrations on their blades. Imho the best serrations on the market. Microtech uses a variety a different colors for their aluminum handles and step it up for special editions to carbon fiber and customized anodized fittings/hardware. They also use more exotic steels and Damascus on their oft’s and give the user more options. None of the competitors offer such variety. Not to mention the various blade grinds and angles that are second to none. The detail on microtech otf blades are by far superior to all other production otf knives on the market to date.
@DougFLA123
6 жыл бұрын
I wish the Phaeton’s blade was as broad as the Microtech’s blade. The Phaeton’s blade looks a little too disproportionately slim/skinny compared to its handle.
@asianky1e30
6 жыл бұрын
The only reason I like the Microtech more is due to the blade proportion look. But other than that, I completely agree with you on the Microtech argument! I still hold that Benchmade charges WAY too much.
@Tom_H327
6 жыл бұрын
AsianKy1e I can agree with this sentiment. Every time I consider getting a benchmade I remember the “dainty-ness” of the blade. And also, I really like that MT uses premium steels, whereas BM uses ordinary.
@cliphunter4800
4 жыл бұрын
I'm also in agreement I was shopping for a knife this last week and was between ultratech or a benchmade 3300 and went with the ultratech for $275 the benchmade was $350 at my local gun shop but benchmade owner or CEO is anti gun
@NikeaTiber
5 жыл бұрын
Microtech is the "gold standard" of otf knives, probably because they popularized them, so every other otf gets compared to them. A few manufacturers are on par or better, some are worse, and everything gets more complicated when you throw pricing into the mix. I was looking at the phaeton, but for me it came down to the ultratech being available in m390, and also having wider blade stock. I also dislike the proprietary screws, they don't serve any useful purpose, especially if loctite was neglected during assembly. In the end, a well made knife is a well made knife, no matter what brand is on it.
@jamesperry1944
3 жыл бұрын
First time seeing a vid of yours. Massive flex with those knives 😂
@mikecurry6847
4 жыл бұрын
The main reason I prefer microtech to the infidel is the microtech has a stronger lock in my experience and my infidel seemed to be more sensitive to getting too dirty to properly operate. I work in a sawmill though, it's not common for a knife to be exposed to the amount of dust, hydraulic oil and frigid temperatures they see in my pocket. I also beat on my work knives pretty bad. The microtech holds up really well to moderate use.
@triple9finestacker631
4 жыл бұрын
I just ordered a utx 70, it was between that or an infidel, and the infidel was juuuust too much money. I know im going to get a good solid knife with benchmade, but that over 400, it was just too much.
@SneakyCaleb
4 жыл бұрын
They go for 250 on the fb groups
@BirdShotIV
6 жыл бұрын
Can't tell you how many times I've come so close to buying one of the Benchmade OTF's lol. They are probably equal in terms of quality when it comes to OTF's imo to MT. Absolutely LOVE the Ultratech's and UTX's for EDC though. The prop. hardware is a little annoying for sure -bird
@desnd3094
6 жыл бұрын
BirdShot IV it’s that price diff between benchmade and microtech. What 275$ for Ultratech and 400$ for infidel with lower quality steal. It’s hard to pull the trigger on benchmade. Way overpriced. Am I crazy ?
@ilikeknafs9563
6 жыл бұрын
@@desnd3094 No you aren't, microtech is such higher quality
@desnd3094
6 жыл бұрын
MARK BARRETT thanks, then you got the guardian OTF good performance not so much in the looks dept. I ben spinning my wheels trying to figure out What I want but I think it’s going to be microtech, OTF .
@mythowrose2742
4 жыл бұрын
Desn D your right about the steel d2 for over a hundred is insulting but the button on every Benchmade otf I’ve seen is easier to use
@themittymak
4 жыл бұрын
@@desnd3094 why does everyone say guardian OTF is good.. the one i tried, it was just as hard to actuate as the microtech..
@simpsonsampson7662
3 жыл бұрын
Microtechs are sexier than benchmades. Also I've seen the torture tests for microtechs but not for any other otf. The torture tests I think speak for themselves, but that is purely my opinion. I do wish they were a little cheaper.
@bvbell5244
6 жыл бұрын
Fit and finish the houge, benchmade and microtech are fairly similar. However where I personally feel that microtech is ahead of competition is in the choice of steel used in their blades, as well as the large amount of options available for each design. Simply steel superiority and variety in each model are what make them better for me.
@willtrax71
4 жыл бұрын
Absolutely a Lifetime Warranty and I love my UTX70 and since 2014 it’s been sent and sent back 4 different times and it seems to keep having the failure to deploy issue. It being the bottom line 70 I would have thought after the 2nd or 3rd issue they would have just replaced it. I’m going to go rogue and open it myself and replace the spring and see if that fixes it. I actually love a Microtech Knife but Despise an Ego. Semper Fi. 3/6 .
@Daddy53751
5 ай бұрын
Did you ever get to the bottom of the issue?
@willtrax71
5 ай бұрын
@@Daddy53751 yes and it seemed to just be a small issues with the Carrier that the Blade rides on and I have an Ultratech now and it’s insanely hard to deploy but getting better and I will say Microtech Warranty Service now is Top Tier and i had a one week turnaround on an Ultratech spring replacement. They also offer an amazing Military Purchase Program with a huge discount.
@jaypolaski5378
3 жыл бұрын
The button play is intentional... There is a hole and a spring underneath the button. So wiggling that button and complaining about the noise isn't "pointing out a defect", it's more like complaining about the intentional design of the button.
@CaptDavesSportfishing
Жыл бұрын
YES, MINE IS A ULTRATECH, WAS A $295 RATTLING KNIFE. THAT LUDT AINT WORTH THE MONEY EITHER, I HAVE ONE. My video was titled microtech ultratech the $295 rattling knife.
@bodean2000
4 жыл бұрын
I totally agree. I have 3 Microtech OTF knifes and for over 200 bucks a company should be able to fix a rattling deploy button with lots of slop. I wont buy anymore MT just for this reason alone. Not worth the money
@TaylorGreene-98
3 жыл бұрын
Its done intentionally if people looked into it. Its a design feature
@jaypolaski5378
3 жыл бұрын
Yeah I see people talking about the button play... It's designed with a spring inside underneath the button. That button play on your actuation button is by design.
@jaypolaski5378
3 жыл бұрын
Also nice tool pic
@butterflyeffect2411
6 жыл бұрын
I think that there is slight variation in each one between benchmade and micro tech and from what I’ve heard generally microtechs have less play.
@SneakyCaleb
4 жыл бұрын
Maybe true
@butterflyeffect2411
4 жыл бұрын
Almost Smart i have owned both now and personally SIGNIFICANTLY prefer the microtech. i prefer the mt blade steel choices but that's personal preference, but the blade size was more useful on the microtech and it had no play. my benchmade rattled around and had a tiny super thin blade compared to the the size of the handle. neither misfired once though so props to both
@SneakyCaleb
4 жыл бұрын
@@butterflyeffect2411 all the models have different blades etc. Both are nice. And both have lemons from the factory.
@lindenarden667
4 жыл бұрын
Thanx! Almost ordered online. I'll seek out a brick and mortar dealer and "hands on" a few before pushing thru.
@rogerculp141
4 жыл бұрын
as someone who also owns both an ultratech and a phaeton, the innards are complementary different
@rowdyrod7870
6 жыл бұрын
And probably 85% don't get own a microtech lol.
@motoknivesandgunsbyjt
3 жыл бұрын
I’ve purchased 3 Benchmade OTfs and have returned 2 of them. My last purchase was the Autocrat and it failed to fire like 20 percent of the time. I prefer the Microtech line. Maybe I just got lemons? I’ve reviewed a bunch of Microtechs on my channel but I gave up on BM OTFs.
@pateralus9
4 жыл бұрын
So I'm a huge Microtech fan. But I absolutely agree with you that it seems to me they're not unequivocally better than some of the other brands, for the reasons you mention. I'm actually really interested in an Infidel (maybe a Mini) after watching you use yours.
@Markstervideo
6 жыл бұрын
Microtechs are always out of stock which adds to the allure. You want what you can’t have.
@michaelfrandsen5200
5 жыл бұрын
Now here is what I think is the most correct answer :) Microtech is NOT my favorite. Their name and the way they always are sold out(Not many seem to be made), but I fully believe it's like you say. We should like here, look for the knives side by side and there Microtech lose IMO :)
@jsin22366322
4 жыл бұрын
I think that serves as evidence of the contrary. Why buy something that everyone has? Not that alluring if you see every John, dick, and joe carrying a micro tech.
@goldengecko1944
4 жыл бұрын
Michael Frandsen And i DONT like Benchmade,they are good in the market for folding blade’s and AXIS but Microtech has never let me down and that’s not what i can say from Benchmade! They should stay away from OTF’s ! But hey thats just my opinion...... they tried and i respect that but if it wont deliver ....then stop trying to jump higher then you can! Give me a Microtech anny time of the day! And if you cant bring up the the force you need to deploye an UTX85 then sure stay away from a Combat Troodon or even a Scarab
@BrothersCinco
6 жыл бұрын
I agree, micro techs ARE generally overrated and over priced. However, that switch jiggle is merely due to design. There is a tiny spring underneath the switch that keeps it suspended. The benefit of this design is that it keeps dirt from your thumb from getting into the mechanism during actuation. You’ll notice there are no open slots under the trigger like there are in the Benchmades. Just FYI nice vid
@sally2395
5 жыл бұрын
Good to know!
@sally2395
5 жыл бұрын
Thank you !
@cirillo9334
4 жыл бұрын
Thanks for info. Still, as the switch is like the first tactile feel you have, it’s signals to me, sh*t quality. All other OTF’s I have are tighter than a drum, and never have dirt issues. But, what do I know? Not a super knife designer for sure. But will stick with my (perceived) higher build quality knives.
@BrothersCinco
4 жыл бұрын
I find any OTF over $400 to be extremely overpriced. At best an OTF is a really cool shank or letter opener. With that said I find manual side openers from microtech to be great knives. Just wish they made a lot more of them
@Maritime_Menace
5 жыл бұрын
Late comment, however I have had a LUDT in m390 and have heavily used it, hasn’t let me down. I’ve had multiple ultratechs and haven’t absolutely loved them. Just ordered a BM infidel in s30v hopefully I love it.
@SneakyCaleb
5 жыл бұрын
you found one in s30v?! where? I have to agree! LUDT is one of the best models microtech makes!
@alexmwk2802
5 жыл бұрын
I got an infidel in s30V also just picked it up 2 days ago. It was blade HQ exclusive
@RayLahey
6 жыл бұрын
I have a s30v infidel too, it's nicer than my ultratech but im not really afraid to beat on my microtech and honestly I go with microtech for my EDC 90% of the time just for that reason.
@williamallison9111
4 жыл бұрын
First off, I love the objective thinking. As a Microtech fanboy (a proud one, at that) I could never jump out and say that they’re “better” than any other company out there, although they’re my favorite. I know, it all comes down to preference and so many of us get caught up in trying to justify our purchases, but to say any one brand is the one to rule them all is a stretch. Now that I’ve added a whole lot of nothing to your comments, I have to go pick up a utx 85...
@Excalibur01
3 жыл бұрын
Short answer is any expensive of a certain item is always overrated. This can apply to cars, guns, etc
@aarontyler9569
4 жыл бұрын
Ok I’m listening, he’s definitely qualified for an informed opinion
@tonyochoa7097
3 жыл бұрын
I have an ultratech due today-if it has blade play like yours,I'm sending it back
@CogitoErgoSum67
3 жыл бұрын
Microtech just uses way better steels, the d2 on the infidel is just plain embarrassing on a $400 knife, u can get a microtech ultratech for $300 maybe less and it has m390 or 204p wich are arguably the best steels out there. People complain about microtech being overpriced and they probably are but at least u get a premium steel, again $400 for a d2 blade its outrageous, I can get a $50 knife with d2 steel, benchmade needs to step up their game...
@jackdaniels7913
3 жыл бұрын
My thought on the pin hole screws, maybe try a pair of snap ring pliers? Might be just the right size to get in there and keep things snug although they probably won't be any good for torquing them down but sometimes it better then nothing... or you can always find some finishing nails cut them flat and mount them in something solid or soldered, braised, welded, tracked, glued, or what ever you think will hold strong enough for the job at hand? Just some rando thoughts... 🥃cheers🍻
@Piersoloutdoors
3 жыл бұрын
I’ve always been a Benchmade man never buy anything else got my first microtech and both are the best in their own way although certain things that microtech does is more geared towards heavy use and abuse compared to edc plus for round about the same price the microtech usually use higher end steels for the same price as extremely outdated d2 and S30v I enjoy both and carry both brands but the microtech now find their way too my hand more so than the others
@msmith6401
6 жыл бұрын
Thanks this was helpful, I am looking to buy my first OTF and this actually gives me good information showing the difference between the microtech and the benchmades
@miketindol1679
6 жыл бұрын
I have an ultratech and a cypher. I like Microtech design except they are too hard to deploy and retract. Actually the cypher is easier. But they carry really well in the pocket and they are fun to play with. I also don’t like the fact that they want you to send it back to them for taking apart and cleaning.
@cubeheadgameing
5 жыл бұрын
The movement is supposed to stop internal damage.
@olpjprpynyujuljuyynl
4 жыл бұрын
Microtech has wiggle room so dirt and grim doesn't stop them from deploying, it's kinda like the ak 47 of knifes
@mythowrose2742
4 жыл бұрын
Richard Mitchell that sounds like an excuse for lesser tolerances
@olpjprpynyujuljuyynl
4 жыл бұрын
@@mythowrose2742 not a excuse but a good reason
@dk210913
6 жыл бұрын
Honestly, I concur. Both companies make great knives, however most Microtech's OTF's are too stiff. I tried opening the Cypher with one hand to no avail, I had to use both hands. Great point about the traction. Most knives I will not buy if it's too smooth to hold onto with very few exceptions. Benchmade service and warranty is flawless. They care about doing the right thing for the consumer and honoring that committment. I don't know if Microtech can match that. Lastly, with Microtech, you're paying for the name. Benchmade has my vote.
@renjoh
4 жыл бұрын
quit being a pussy
@bunsonhoneydew9099
2 жыл бұрын
It comes down to the same argument with handguns. One is easier to carry and the other is easier to cut with. The Microtech is trimmer and easier to carry. The Benchmade is bulkier and easier to get a good grip. They are both nice but they are going for a little different concept.
@ald.5147
4 жыл бұрын
I once owned an Infidel. When I got it, I was so excited. I tested it by stabbing it into 3" corrugated cardboard. The blade was pshed halfway into the handle and jammed stuck. I could not get it to work after that. I sent it back and got my money back. I am leary of ever buying another infidel again. I like the sytyle of the Infidel but don't think I would rely on it for anything.
@csarebel8657
2 жыл бұрын
Thank you! I bought my wife a MT utx-70... paid $220ish for it. My observations: 1) The edge was DULL 2) The Bohler M390 steel was extremely soft. As soon as I got one side sharpened, I’d flip it over and the bevel on the other side was gone. 3) Stiff action... too stiff 4)There was blade play right out of the box. This knife is not worth the money IMO and I’m thinking about sending it back. That’s something I never do, but I’m that unhappy with it. For the money, I was expecting a lot more than a fancy box, and a subpar knife. Should’ve bought her a Hogue.
@SneakyCaleb
2 жыл бұрын
Hogue knives are way better quality
@csarebel8657
2 жыл бұрын
@@SneakyCaleb that’s what I keep being told... by people who know. I’m convinced the hype and defense of MT, is nothing more than guys trying to convince themselves that their $500 troodon was money well spent, and they totally did not get ripped off.
@christopher_martin
3 жыл бұрын
im saving up for a deadlock!
@thoricdavid8174
5 жыл бұрын
I really just wish that benchmade would upgrade their damn steel!!!!! Make the drop point infidel again and do it in 20cv for goodness sakes.
@esccarpenter
3 жыл бұрын
the wiggle is to reduce wear an tear
@randyworke
Жыл бұрын
My first otf comes in the mail tomorrow, its a utx85. i like seeing good and bad reviews on it.
@SneakyCaleb
Жыл бұрын
It’s still a great blade
@Daddy53751
5 ай бұрын
I’m actually advocating for MT to make what I call “Ultratech 115”. A 15% larger Ultratech. I’d seriously love an “Ultratech 115”!!! As far as the perception of MT, I think at a certain point it becomes something along the lines of Gibson Guitars, and Glock pistols, and folks want the “original benchmark” of whatever it might be. Other makers are making factually superior guitars and pistols but there’s a comfort and satisfaction of the “original”. Quasi religious “fan boys” are IMO a completely separate category, and I’ve no explanation for them. That’s what I think.
@dalethorn2
6 жыл бұрын
That's a great look at these knives. The only autos I've had before the UTX-85 were the Protech The Don, a couple small Protechs, and a Kershaw Launch. The Kershaw was as good IMO as the small Protechs, but the Protech Don wasn't working out due to the little "scabbard" things catching in my pocket. I like the look and design and quality of the Microtech, but the deployment is ridiculously stiff. If it gets easier to open and close that could make it a keeper, otherwise I dunno.
@goong_z6072
5 жыл бұрын
I have both the UTX 85 and The Infidel mini and honestly I think they both perform equally. I cut alot of types and sizes of rope. As far as play in the blade thats normal for an OTF.
@ilikeknafs9563
6 жыл бұрын
I've had a couple Mts that were hard to fire, but the 85s are probably the easiest to fire, literally a little kid could do it
@jmcknight1113
5 жыл бұрын
I disagree . My child's mother couldn't and she's a 28 year old in shape woman who's 5 foot 9 ... Kinda embarrassing to spend 250 and say these things are the best then she can't even fire it.
@mrsarg56
6 жыл бұрын
Your not comparing steels. Benchmade has s30v vs microtech m390
@SneakyCaleb
6 жыл бұрын
Benchmade uses some of the best steels around including m390/20cv
@mrsarg56
6 жыл бұрын
@@SneakyCaleb Yes but not in their out the fronts. Dont get me wrong benchmade is a good knife ive owned 2 infidels and the spring broke in one of them but that was just a fluke.
@SneakyCaleb
6 жыл бұрын
@@mrsarg56 true
@tbm7301
3 жыл бұрын
The only reason why I prefer Microteck otfs is because of the designs. All of Benchmades OTFs just look too bulky and the blade to handle ratio just doesn't look right. The Autocrat is probably the only Benchmade otf I would get.
@markdavid1479
6 жыл бұрын
I’ve owned a bunch of 85s over the years and ultratechs. I like ultratechs way better than 85s. The little difference in size makes a big difference IMO.
@willtrax71
3 жыл бұрын
Great Video, I’ve been saving to get a top-tier OTF and watching videos on the Phaeton and Mini Infidel for several days and I’ve pretty much ruled out the UTX 85. It’s so great you have a Hawk Mudd knife and think the Deadlock is amazing. Semper Fidelis
@IbtissamTrabelsi
5 жыл бұрын
For me is expensive, but the quailty is worth for the price
@denialater7775
6 жыл бұрын
ive been playing video games all my life. so ive been training my thumbs all my life for the moment i get my ultratech lol
@langstonjones69
6 жыл бұрын
Not sure how much value I can put into a rant from a guy saying "we couldn't deploy the microtech". I can definitely value your opinion though
@SneakyCaleb
3 жыл бұрын
I hear you lol! We could open it but it was incredibly stiff.
@citystar87
6 жыл бұрын
I love all my benchmades most but I dig my utx70
@9MMSWORD
4 жыл бұрын
The Benchmade phaeton and microtech ultratech are the same knife basically. The phaeton has the same exact internals as a microtech. I don't know if microtech straight-up manufactured the body themselves or license Benchmade to do it but they're the same
@theartshow1476
4 жыл бұрын
I can’t really speak for benchmades otfs. But I’ve had a few axis locks fail on me and some terrible symmetry with blade grind lines on benchmades and if you ask me that’s out of line for what they charge. As far as micro tech, the only one I own and have ever handled is my utx 70. It’s tiny and I love it. I’ve seen some videos of people just beating the hell out of those utx 85s and while I don’t think that makes any sense, it is nice to know it will hold up to a degree of usage. Some guys have carried a micro tech otf for years without failure. Great video btw, I agree with you. I wish they would release a batch now and then with less expensive steel. Say 154 cm for example. I’d gladly pay 100 bucks for a 154 cm micro tech knife. But they probably wouldn’t even drop in price even if they did use a lesser steel.
@colbysegura5235
3 жыл бұрын
Just picked up a Normandy. Lifetime warranty so I figured I couldn't go wrong at 1/3 the cost. Haven't seen any torture test yet.
@RSLucid
5 жыл бұрын
The price difference and the blade steel from microtech definitely should have been mentioned during this video. Microtech generally has much better steel for a lot better price.
@royrodgersmcfreely2858
4 жыл бұрын
Fucking amazing steel
@themittymak
4 жыл бұрын
the phaeton i owned was actually a ton easier to deploy.. it was a gem.. i sold it though.. i think the ludt is awesome, and i recently got the recon auto.. ots is my thing these days
@Bayerische.Motoren.Werke.
2 жыл бұрын
i love my utx 70 but i wish it didnt have so much blade play wich im super picky about, but that seems to come with the otf action design. i wish i could buy more autos but i live in soviet canada and they are prohibited :(
@Biblicalgiants
5 жыл бұрын
That's a nice Hogue knives mat!
@ilikeknafs9563
6 жыл бұрын
Microtech is a million times better then benchmade. Microtech has better blade to chassis ratio, better steel. Infidel has way more blade play ,microtech has very little play. Microtech fire so much harder , which makes it less likely to fail. Just the whole microtech design is better
@sorbazorb5g692
5 жыл бұрын
My Microtech got ran over during an ice storm while I was knocked out. The dude saw my dumb ass on the ground and ran overnight my knife and probably panicked thinking it was my arm or something. Knifes perfectly fine other than it won’t fire, warranty is voided so fuck it I’m gonna open it up and se how fucked it it is.
@David_DY
4 жыл бұрын
Everyone is saying microtech because that's what they own...They have been at it for a while But I'm picking up a phaeton over the ultratech little more blade length I'm fine with S30v actually prefer for ease of sharpening Benchmade warranty is in my opinion the best and they use torx so that u can service it..Also l have huge hands that would be hitting of the glass breaker
@donttrip4228
4 жыл бұрын
DAVID YOHO thanks , glad to hear we got some phaeton votes haha . Just ordered the phaeton just like in the video and I’m stoked
@SquidNut
4 жыл бұрын
I didn't hear you mention the difference in price?!?! Benchmades are AT LEAST $100 more for the same size.
@bladecollector7
6 жыл бұрын
Really like your ludt color! I just got a microtech Sigil and had to send it right in for warranty it was rubbing scales
@thebiped
4 жыл бұрын
You're comparing a $300 blade to a $400 blade. I'll take microtech all day for 100 bucks cheaper than the competition. So you may be right about the button not having the wobble on the Benchmade but it's not worth 100 dollars to take that wobble out of my microtech.
@MONEY11721
Жыл бұрын
Benchmades are literally the best knives for the money
@franckjaredd
4 жыл бұрын
All those other knives look tacky next to the Microtech
@lesgarten
Жыл бұрын
@AlmostSmart Are the buttons on your L-UDTs crunchy/gritty? Does it get better with time?
@SneakyCaleb
Жыл бұрын
Yeah they are slightly. It’s never bothered me though. They are my favorite Microtechs.
@lesgarten
Жыл бұрын
@@SneakyCaleb I've been working mine for a few days and it has gotten a little better, was wondering if it will go smooth? Awesome knife for sure, scary sharp.
@TheMillieSmalls
Жыл бұрын
Lol all those knives in their little sheaths
@Jack_all
5 жыл бұрын
I hate to admit it but I've been carrying and Ultratech clone for 2 years now and love it so much im considering buying the real deal.
@vspec17
4 жыл бұрын
You can use a pair of snap-ring pliers for the Tighe hardware.
@toojack9346
4 жыл бұрын
For double action EDC I'd go Benchmade all day. However when I don't feel like carrying my side arm, I conceal carry a Halo VI. Id like to pick up one of those drop point Infidels. Super hard to find though.
@madisonjones2714
4 жыл бұрын
Go watch a torture test on these knives that might help you
@scottkoblitz1230
5 жыл бұрын
Benchmades autos are just overpriced. You can get a ultratech with m390 for way less then a infidel. And I prefer the side mounted switch. And the overall look.
@MJYontheFly
5 жыл бұрын
I think they are both quality knives. My experience has been that my utx-85’s deploy just a little easier than my infidel and mini infidel, however, they all are easy to deploy in my opinion.
@Mrplacedcookie
6 жыл бұрын
BM infidel is a smooth deployer, currently trying out MT ultratech/M390 . A bit stiffer but no prob and bits for the hardware is available.
@handsclasped
5 жыл бұрын
What I think is... my Microtech is so stiff I can hardly operate it sometimes, their LUDT is much better than their OTF knives. I'd say Benchmade in a sec if you compared them, I never owned a Benchmade OTF, but have played with one owned by a friend. Nice stuff you got, keep telling the truth. You may save someone else from much frustration. Thanks AS
@secretbase7473
4 жыл бұрын
Send your microtech in they'll service it and smooth out the deployment take advantage of there services, you have a lifetime warranty.
@SneakyCaleb
Жыл бұрын
Agreed !!
@111111111Tiger
5 жыл бұрын
the hardware is geared to KEEP you from opening it. It voids their warranty. You can find the bits all over the internet.
@nickwaugh5907
2 жыл бұрын
You said 200. Cheapest I could find now (2021) was 250 for utx 85 double edge dagger (which I wanted)
@SneakyCaleb
2 жыл бұрын
Prices have gone up for everything
@Taquitos95
5 жыл бұрын
Idk how you think it’s a very fair comparison. On knife center the benchmade is like $325 while the Utx 85 is $225. Like in my mind it’s like the cheapest quality Otf. Like I sure hope the benchmade have better quality for costing so much more.
@houdini178
5 жыл бұрын
just got me a marfione cypher od green today, and the sound at 3:28, when in my hand, it felt definite and with purpose. Then it hit me, this knife has a theatrical aspect to it. I could see me 'playing this knife' like an instrument with its loosened part in a scenario where I want to raise the tension, or create subtle awareness that 'hey, I've got a knife in my hand' or 'is he holding a knife, what is that sound?' or ... basically, the modern version of the good 'ol ('bad boy') switchblade/butterfly of the 80s
@Tbone42tx
5 жыл бұрын
Microtechs hold there value!! And there known to bed out of stock in certain models forever...look at the STITCH now inner of the hottest knifes now only because you can't up and order one..anyway Microtechs are my favorite brand because they hold value regardless condition!
@secretbase7473
4 жыл бұрын
Stitches are being put back into production super stoked.
@Ponixup
3 жыл бұрын
Best automatic sold. Microtech can't be beat.
@Spacebarf
4 жыл бұрын
I have a UTX-85 and the Phaeton. IMO The Benchmade is a much better edc since it lacks the glass breaker. Absolutely love the jimping on the Benchmade too. I still think the microtech is a great blade but the benchmade is arguably better
@lancebangwell
5 жыл бұрын
Microtech is Pro 2A and Benchmade is anti 2A. Microtech for the win.
@christiandinero8083
5 жыл бұрын
agreed. I'm into knives and not surprisingly guns. Was going to buy a mini cr but with how expensive benchmade is and how they are anti 2A, I will no longer be buying it. I cant support them being against our freedom.
@ElliotDrinksWater
5 жыл бұрын
Benchmade isn't anti 2A. smh
@angoor101
4 жыл бұрын
You know, it’s the perception that Microtech is a better knife maker. They’ve done a better name brand marketing campaign. Much like Harley Davidson motorcycle company. Honda is way better product, but they didn’t do a good job selling the name in their bike market. Good video. I am in the market to get a Ultatech and I think you just changed my mind. I have to justify $300 on a Ulteatech. Thanks for the post. 👍
@EBFNOQMAGNO
4 жыл бұрын
Ordered my first infidel. Failed out of the box and a screw fell out. Sent it back. Second one had a nick in the blade. Sent it back, bought a microtech.
@semperparatus5942
2 жыл бұрын
You’re full of it. Period
@schofrenzy3444
Жыл бұрын
Where do you trade knifes at ?
@k9teamzagrebskolazapse149
3 жыл бұрын
Beutiful knifes, but i also for otf no1 is Microtech ultratech and for clasic EDC knife Benchmade 940 i love that knife or LUDT Microtech
@handsclasped
5 жыл бұрын
And the guy below that likes their looks, looks can't protect you when you need it.
@Nicetints
5 жыл бұрын
Just picked up a utx85 t/e. Got it for a good price so I jumped but honestly I do feel the quality could be better for the money. I had a few failures to deploy which my have been from some pocket lint getting in the wrong place, blew it out and haven't had anymore problems. But the blade play does bug me a bit.
@bladecollector7
6 жыл бұрын
Nice job on your new 710
@mikef5694
4 жыл бұрын
Dream knife would be a Mini-Infidel with the single edge blade, with the OD green frame that they did for the mil/LEO edition. I’d pay full retail for that.
@SneakyCaleb
3 жыл бұрын
I agree with that!
@Shadeed_Fitness
6 жыл бұрын
dope video bro. I thought I was the only one who thought the ultratechs were stiff as fuck. Do you think the benchmade otf is worth the $400?
Пікірлер: 448