You make this welding easy. My weldings are not so Good. Cool demo. Thanks mate !!!
@johnsomerset1510
6 жыл бұрын
Great welding job! What I do myself with gaps, particularly when I'm stick welding, is to wedge something like a nail on it's side in the gap and then weld across it. I also use lengths of welding rod with the powder broken off, jammed in the gap. If the weld needs to look good on the inside face, I weld and grind it there as well. It's strong and looks good enough for farm machinery.
@glendederick7270
7 жыл бұрын
i thoroughly enjoyed this video. i love it when someone can make a living from home!
@jaydendavis7596
6 жыл бұрын
I really appreciate your tips. I 've had few problems with welding gaps with my everlast mig welder.
@ricardomontes373
3 жыл бұрын
Excellent work, you have a pulse for welding my friend. Thank you for the tips.
@Pete-from-Tn
7 жыл бұрын
Nice job filling those gaps. 35+ years ago, I filled those. Stick welder and using a rod in one hand. Use the extra rod like you would use a braising rod. That was back when we were building Dumpsters in Shop class.
@emeltea33
7 жыл бұрын
I've been meaning to try that. I was just closing up some gaps with 6011 on some rusty stuff, quite a pain, but worked well enough. Fortunately its not structural.
@richardchase4019
6 жыл бұрын
we call that tooth picking on the oil rigs
@renaecampbell5780
2 жыл бұрын
@@richardchase4019 in the building trades we call it Texas Tigging!!!
@whissskeyyou8027
3 жыл бұрын
Helped me a shit ton, great explanation! Thank you!!
@g.fortin3228
4 жыл бұрын
geez ended up looking darn good ! I learned something. Thanks for going over the technique afterwards.
@craigluhr7243
4 жыл бұрын
Nice work. A good craftsman knows how to fix it when things don't go perfectly. You have skills, brother. Awesome to watch.
@outwhitu08
6 жыл бұрын
As always Allen, great video, Voltage on the Lincoln 180HD is, A-19.29 B-20.72 C-22.72 D-25.19 E-32.83
@v8vega383
5 жыл бұрын
outwhitu08 By chance would you know the voltage numbers for the Lincoln 140?
@davidfusco6600
3 жыл бұрын
Thanks for the great welding tip!
@rvalcourtpersonaca
7 жыл бұрын
Excellent video Allen, I always wonder what happen when things don't turn out the way they should. Check to see it it's square, what do you do when it's not? Check to see if it fits up properly, what do you do when it does not? Check to see if it's level, what do you do when it's not? Check to see if your sides are parallel, well, what do you do when they're not?
@twiz8789
7 жыл бұрын
I've done it that way before. I've also chipped the flux of a welding rod and clean it up good and use it to fill your gap. Good video
@nifty1940
7 жыл бұрын
Also done the same. Works just fine.
@derekstetzer6388
6 жыл бұрын
Thank you for the tips I just started getting my into welding
@markchamberlin7554
6 жыл бұрын
Great video, really helps me out. Been welding 1/8 tubing building frames. My band saw will finish a cut at a angle and leaves me a gap. So I will try this technique and turn the heat down and speed and run passes. Thanks
@michaelphillips-nxs
3 жыл бұрын
you're showing some good welding skills! good vid!
@patrickpeterman8736
3 жыл бұрын
learned alot ; very well done PJP
@gordon4385
7 жыл бұрын
Now that is a beautiful weld. I had trouble the other day closing a much smaller gap - 1/8 or so. My wire was shooting through. Next time Ill try to use these techniques.
@mirola73
4 жыл бұрын
You put my mind at ease have screwed up 45 degree angle cuts.
@lonixlon
2 жыл бұрын
my only comment is dont start stop on the corners, run it around the corner a bit, makes it easier to seal up
@matthewpokrywka244
6 жыл бұрын
Your welding skills shows us that we all do not need the 2000 dollar and up machine to produce great projects Thank You
@dukesdad1
7 жыл бұрын
i truly like your tips brother
@billcallahan2830
7 жыл бұрын
Great tips on the abc Lincoln welder. Also how control distortion. As long as you have your bite it is a stronger weld. Amen to you.
@lovetobikedaily
7 жыл бұрын
Great Video!!! I enjoy and learn from the project you do each week.
@jamestijerina2787
5 жыл бұрын
Thanks for the video and the knowledge. Well done. Us beginners sure do appreciate it.
@Brad1237202
7 жыл бұрын
Love the channel!!! Thanks for sharing Allen!
@dallasbrian
3 жыл бұрын
Those welds look good. I guess I can’t blame my machine anymore
@douglasthompson2740
6 жыл бұрын
As per Jody you can calibrate your wire speed by using a stop watch and running the gun for six seconds. Multiply times ten and you have your inches per minute. Do it every two or four numbers and you should see if it is an even incremental dial if so you then can interpolate and know what ipm each number is. For the volts I would put a multimeter between the ground and the stinger (use the welders ground so you aren't measuring ground resistance through the workpiece. Just bought one of those Pro Weldpak 180's. Hope they are as good of quality as my Weldpak 100 I bought almost thirty years ago and is still going strong. Being 120v it only pumps 90 amps so it was more than time for another companion. Take care. Doug
@jaydendavis7596
6 жыл бұрын
I like to use a piece of copper or aluminum to help prevent burning a hole through thin material or to bridge big gaps. I'm now playing with an everlast pulse mig welder. I hope the pulse will allow me to do away with the heatsinks.
@sherylbeasley4938
7 жыл бұрын
I'd be happy if my boss supplied me with steel half as clean as this!
@Allensweldingwoodworking
7 жыл бұрын
Sheryl Beasley me too..lol..99 percent of this is new steel, just about all I use anymore except for tanks and barrels
@allensnook7760
3 жыл бұрын
From one allen to another i enjoyed ur tips but wondered why you didnt mention using a backing chunk of brass or copper such as maybe a sheet jammed into back of weld.i know it would be hard given ur projects shape but still doable.iam just getting into this welding thing so ur advice is handy!!snookie pa.
@johnralston5818
6 жыл бұрын
... Thanks Allen... i'm 72 & learning a new trade.. made my 1st chicken-shit yesterday ;).. but' i'll be back in my shop in a few hours, trying that 'circle' motion. ( i'm making a step for my trailer hitch, so it will my ass that falls if i do a bad job...lol ) Keep up the good work !!
@raindavis266
7 жыл бұрын
Great looking fire pit! I think the reason FOR your gaps was in assembly. Next one you build try leaving that base plate in one spot. I'm sure your measurements were w/in 1/8" anyways, and I can see how straight those cuts are. If you need a jig you might be able to use a finished one flipped upside down. I am gonna have to get some plate and try this one myself.
@PnPModular
7 жыл бұрын
Great video covering one of the great mysteries of MIG :-) great tips.. look forward to trying out.. I find wire speed hard to work with on my welder it doesn't seem to crackle very well with the lower wire speeds just spits.. maybe I'm trying too low.. thanks again
@Jmoss225
7 жыл бұрын
I was wondering your patterns thanks great video!
@scottybabb6297
7 жыл бұрын
Thanks Allen. I hope you enjoyed the eclipse.
@WV591
6 жыл бұрын
As i've said before one of the best master welders on tube. natural. TU
@johnwilkinson1302
7 жыл бұрын
Great tips Allen. Great looking welds...
@ytkealoha
5 жыл бұрын
many thanks for teaching me something new and very useful.
@BruceBusby
6 жыл бұрын
Great tips thanks for helping us newer welders
@phat_g
6 жыл бұрын
I always hesitate to weld slower because I always think I'll start undercutting and burn holes through
@briteRedaz16
7 жыл бұрын
I like using a piece of lead as a back plate to help weld gaps.. works great on carbon steel.
@RickyDove
6 жыл бұрын
You're welds are beautiful Allen
@rotam8680
3 жыл бұрын
a good trick is to also have a bunch of bridge tacks
@aceeastwood2871
6 жыл бұрын
Another tip is to turn it vertical and do a faling root weld and then do the filletweld.
@mikewood3528
7 жыл бұрын
Subscribed. Great explanation of procedure. Excellent weld signature.
@suprlite
4 жыл бұрын
Nice work. But wouldnt it be both easier and cheaper to just stickweld those big gaps?
@pauld.1256
5 жыл бұрын
Good tips on welding gaps.. thank you for sharing
@hellbillyaustin6883
7 жыл бұрын
Great tips matey, im sure they will help someone out. All the best.
@aguilayserpiente
7 жыл бұрын
Tack welding and set up must have been a nightmare.
@Travisphoenix334
7 жыл бұрын
Appreciate the video. Thanks!
@Manchester_engineering
7 жыл бұрын
Ve great if you did a video on how to figure out the angles & how wide they should be at the top & bottom. Something i struggle with.
@breezybmetal8646
2 жыл бұрын
Nice weld!!!
@Allensweldingwoodworking
2 жыл бұрын
Thanks!
@richsellskc
7 жыл бұрын
you weld like a boss! looks easy but I bet it's not. thanks.
@terrysibley4849
4 жыл бұрын
Good old pipe whip. Nice
@bbrinser
7 жыл бұрын
Great tips, going to try a similar technique with my tig...
@JimTheZombieHunter
4 жыл бұрын
@10:00 .. Was wondering something similar. Gaps that I can't quite solve in 16 Guage . either no penetration or blowing through. Was thinking of laying a length of 3/32" filler rod in the gap and seeing what happens.
@Allensweldingwoodworking
4 жыл бұрын
With something that thin, you'll probably have to use a filler, keep the amps down around 17- 17.5, or try "squirting it in" one tack at a time as fast as you can move
@007380
6 жыл бұрын
You should be able to use a voltage meter to see what the voltage is at different settings
@markholtan5696
4 жыл бұрын
Great video 👍👍
@davidboyce1905
7 жыл бұрын
Another tip is put a piece of copper behind the gap and lay the weld on top of it. The weld won't stick to the copper and the copper will stop you blowing through.
@brianspruill5424
7 жыл бұрын
Seriously! 2" flatbar, 1/4" thick, 12" long. Jam it in behind it and go.
@charliemarks6096
7 жыл бұрын
Great tip. I've just started mig welding with my everlast welder. I want to weld thin material and there will be gaps and I understand that this is probably one of the most challenging scenarios.
@customhaines2510
7 жыл бұрын
Aluminum works too, just needs to be a little thick to take the heat.
@Allensweldingwoodworking
6 жыл бұрын
David Boyce yea that will work, brass will work too
@30ktm396
6 жыл бұрын
Allen's welding/woodworking I agree with you, brass and ceramic are my first choices
@randynewtonsr9659
7 жыл бұрын
As always , nice job sir, love your work!!🙂👍
@mico26az
2 жыл бұрын
Looks great
@v8vega383
5 жыл бұрын
Nice welds and great tips!
@gregsullivan8956
7 жыл бұрын
Thanks for the tips.
@wesleynichols5383
7 жыл бұрын
Nice job! Thanks for sharing with us.
@thetruth9361
7 жыл бұрын
Good job Allen.
@johnharris7353
6 жыл бұрын
Very good-=the stupid place where I work has me weld 2" handrails w/o notching, what a pain...I stuff all kinds of scrap in there.
@offdutyartllc1263
7 жыл бұрын
Great video like always Alan
@JoshSmith-pg6gn
7 жыл бұрын
There is a chart on the inside of dooor that is real close to the settings u need
@ryankim3612
7 жыл бұрын
Thank you for your great tips bud.
@mjh3392
4 жыл бұрын
I've got the smaller Lincoln... Promig 140 I believe. It's 120 volt only for incoming power. I catch hell with long welds because my breaker will trip after a while. Just switched to .030 from .035 and that made a big difference in several ways but I still can't just go to town. Any tips other than getting a 240v machine?
@edwardmartin1831
7 жыл бұрын
Morning Allen Get tip thanks Your U tube is really helpful How is the cooking coming?? Talk soon Edward
@ceesteven
6 жыл бұрын
Great info. Nice work! Thanks.
@ryansmith3638
3 жыл бұрын
Thank you for the video sir
@DavidGonzalez-md9je
5 жыл бұрын
Really nice welds. Are you using inershield wire or a gas
@jasongrinnell1986
4 жыл бұрын
Very informational. Thank you!
@mechanickb4350
5 жыл бұрын
Looks good!
@larryroy6217
4 жыл бұрын
hey thankyou for the pointers I really appreciate it I am very new any tips or tricks or anything i shouldnt start doing build a good habbit?
@kungfumagic007
7 жыл бұрын
Awesome video and great welds, question I have a flux welder would that work as well for this type of method? Thanks
@realcdnbacon1392
7 жыл бұрын
You should try to do more tutorial/problem solving videos
@alistersibley2155
7 жыл бұрын
Brilliant vid!!
@jenniferfairchild2958
6 жыл бұрын
Really like your videos hand keep'em coming I was ragging on you my brother the first video I watched just being a ass I guess because we are a lot alike in the art of steel work I'm about to start the the biggest smoker/pit/griddle/boiler I've ever done just was looking around and found you I'm going to keep watching so you keep welding hand I love stepping the hard wire it makes em stop and look when it's done just right nice job Allen very nice talk at you later my brother
@austin3626
6 жыл бұрын
Your accent is the bomb digity
@weldingjunkie
6 жыл бұрын
Awesome video as always Allen. Question I’m building floating fire pits like water fire. It’s a dish with expanded metal and 3 arms with floats they look rubber what would you suggest to use?
@craigfuller6187
7 жыл бұрын
Great video. Do you sell plans for fire pit or only complete pits
@jayb3689
6 жыл бұрын
Thanks for the video. Helped me al lot.
@edwardnickerson6149
Жыл бұрын
Thanks
@dirkdiggler4843
6 жыл бұрын
Love these videos!!
@hermanperez4078
6 жыл бұрын
Great videos, You are an artist. Would a stick welder work better for those gaps?
@basshead4204
6 жыл бұрын
Sure, because since the electrode is of larger diameter it deposits more material quicker but stick welding has slag to deal which can cause slag pockets and are hard to get out sometimes. Also it introduces more heat into part.
@bruceleroybell8139
3 жыл бұрын
A great help
@luisvasallo3646
3 жыл бұрын
How are you welding outside with mig
@isaurobanuelos499
7 жыл бұрын
I wish jobs allowed young welders. sadly I don't have 5 years of experience
@boberson33
6 жыл бұрын
Isauro Banuelos is there a votech school in your area where you could learn welding? Do you know any welders who could give you time to practice?
@jamiebuckley1769
7 жыл бұрын
nice job bud .you welded that the same i would with the c-- u called it a u but its not a u weave its a c motion
@noahwolfe1304
7 жыл бұрын
Jamie Buckley why don't you make your own videos
@fernandotagliatti819
7 жыл бұрын
Parabéns pelo trabalho ok
@nicklainas
7 жыл бұрын
very nice work!
@errolcrossman8315
7 жыл бұрын
Do you use dual shielded at all, or just solid with shield gas? Just curious as you do a lot of welding outside.
@buckwheat7424
7 жыл бұрын
that looks like it could be a rocket launcher pad
@robertspicer3716
6 жыл бұрын
nice work!
@yohanruiz1915
7 жыл бұрын
Que japi: esta buenísimo el video aunq no entendí ni una M. ..jaja saludos desde Argentina
@markharrisllb
4 жыл бұрын
I’m totally new to welding, so you might think I’m asking a silly question. As the gap is now mainly weld material and not the parent metal how well will it stand up to the heat of the fire once in use?
@Allensweldingwoodworking
4 жыл бұрын
It will hold fine, a lot of welding applications will fit up with a gap between materials in order to have 100% weld
@markharrisllb
4 жыл бұрын
Allen's welding/woodworking Thank you for the quick reply, that deserves a subscribe.
Пікірлер: 168