So well explained! Thanks for taking the time to put this all together. Keeping active links up on both standard and distributed vSwitches at the same time during the config. What a concept :)
@MyRASTABAN
2 жыл бұрын
Great video, this is the best kind of content, simulate diferent settings, not just the basics, get into a simple way of deploying vsphere and a practical use.
@kregroenfeldt7528
3 жыл бұрын
This video, and your other with the LAG setup, are exactly what I have been looking for. Especially showing the Cisco switch console's etherchannal summary. Perfect examples. I have read various information for a very long time, but this provided clarity that I did not yet realize. I really like this method. Thank you!
@itseasy8296
3 жыл бұрын
Kreg, I am happy to hear that. When I first played around with vCenter DSwitch I was very confused and took me a long time to fully understand it. Thanks!
@RHINO777
3 жыл бұрын
So easy to understand from your video. great guide !. Hopefully, you can make more video about Vmware technical.
@itseasy8296
3 жыл бұрын
RHINO Thank you so much. I am working on a few new videos and will upload soon!
@MrPiig8
6 ай бұрын
Best video I’ve seen yet! Thanks!
@yoganandats2565
3 жыл бұрын
Very informative and clear !
@danimoosakhan
Жыл бұрын
This is the best way to migrate from standard switch to distributed switch, including port groups and VMkernel NICs.
@nithinsalian9951
Ай бұрын
excellent. Well explained.
@MrSheriefkadira
6 ай бұрын
Hi , Thanks a lot for the video. I have single physical NIC in my ESXI host. how can i migrate from the standard switch to the VDS.
@sameertsm
9 ай бұрын
Subscribed, Great effort, very useful :)
@xavierb1307
8 ай бұрын
Thank you, great video
@maskawathlatif4190
7 ай бұрын
well explained, Thanks
@user-kt1bx4qw6d
11 күн бұрын
thank you bro
@OrgNetworks
5 ай бұрын
Thank you.
@asimkumarsinha7361
21 күн бұрын
thanks
@billphone
Жыл бұрын
Excelent thanks!
@dbishop9085
Жыл бұрын
EXCELLENT
@Nick-tv5pu
Жыл бұрын
No longer works as of vCenter 8. The host on which the vCenter instance resides fails when migrating the VMkernel NIC
@AhmedHassanAl-Mousawi
Жыл бұрын
Same with 6.7, I don't know what is the issue
@shmoonda
9 ай бұрын
Have you solved the problem by any chance? Stuck @ the sape step
@shmoonda
9 ай бұрын
@@AhmedHassanAl-Mousawihave you found a work around by any chance?
@smaksood
6 ай бұрын
❤
@Ballebone
11 ай бұрын
Do you have advice for how to configure the MGBT interfaces on the hosts first? In my scenario, I have 4 interfaces and the mgmt subnet is on a specific VLAN. should I enable all 4 interfaces for mgmt and set the VLAN there to ensure trunk mode?
@mohamadofeshat7354
2 жыл бұрын
thank you so much !
@MrGoThrough
2 жыл бұрын
thank you so much
@1BAmir
2 жыл бұрын
Thank you!
@user-hd5lj7io9i
2 жыл бұрын
good video
@koushsport9721
Жыл бұрын
keep going
@mohamedabdelaal9368
3 жыл бұрын
Hello Sir, Thanks for your video. How can I contact you please ?
@khmertechtips9039
6 ай бұрын
Hello Sir Have any problems if vCenter down?
@Chaithu8919
Жыл бұрын
Sir where to see vm creation date on the vcenter sir
@ThomasWhittaker
2 жыл бұрын
Any plan to do HA
@ThomasWhittaker
2 жыл бұрын
Thumbs uppppppppppppp
@kregroenfeldt7528
3 жыл бұрын
At 16:40 you migrated a VM into the Distributed Switch, using the migration menus. Is it necessary to do it this way, instead of just manually moving the virtual cables, by editing the VM's settings? Does something more occur using the migration? Great video!
@viswaranajnsahani3797
3 жыл бұрын
Downtime will be involved for VM's by editing the vm's settings..to avoid downtime need to follow the same steps explained in this video
@kregroenfeldt7528
3 жыл бұрын
@@viswaranajnsahani3797 I understand now. Thanks!
@pejekross
3 жыл бұрын
Hi. already had configure the port group in the each vmhost previously, now when I create the vdswitch en vcenter and try migrate the portgroup to vdswitch I can´t , appear the message "hosts no compatible" any advice, please ?? regards and tanks for you video.
@pejekross
3 жыл бұрын
previously had been configured other vswitch with the portgroup and main vswitch0 only with kernel nic configured and the uplinks are separate, two for a vswitch0 and two for the other, so I think maybe this is the razon why not are compatible the hosts sxi with vcenter. In advance thanks for you support. regards again.
@itseasy8296
3 жыл бұрын
@@pejekross I apolgize for the delayed response. It could be many different things happening here. First thing that comes to mind (and sorry if this is a silly question)... Are the vCenter and ESXi hosts the same version?
@pejekross
3 жыл бұрын
@@itseasy8296 don't worry, un Advanced thanks. Yes I got the same Versión. The licence are not support vdswitch, I have esencial plus. I think that I gotta the licence.
@pejekross
3 жыл бұрын
I gotta grown *
@itseasy8296
3 жыл бұрын
@@pejekross is this on a production network or a home lab? Worse case scenario you should be able to delete the old Dswitch that is attached to the ESXis and then create a new one with the vCenter server that you are using.
Пікірлер: 44