Thanks for great turorial. Very clear and precise way of Mikrotik load balancing...
@louiscollin5773
3 жыл бұрын
you all probably dont care at all but does any of you know a way to log back into an instagram account..? I was stupid lost my account password. I appreciate any tips you can offer me!
@rayzander5562
3 жыл бұрын
@Louis Collin Instablaster :)
@louiscollin5773
3 жыл бұрын
@Ray Zander Thanks for your reply. I got to the site through google and Im trying it out now. Takes quite some time so I will reply here later with my results.
@louiscollin5773
3 жыл бұрын
@Ray Zander It did the trick and I finally got access to my account again. I'm so happy! Thanks so much you saved my ass!
@rayzander5562
3 жыл бұрын
@Louis Collin No problem :)
@lenleangztechnology3347
Жыл бұрын
thanks for the video, it was very helpful.
@eastelldev
2 жыл бұрын
Thanks very much guru.....
@michelepiovani2061
2 жыл бұрын
hi, thanks for the video, it was very helpful. However, I need the two ADSL lines to be added together in order to optimize performance, can you help me?
@samuel.montgomery-blinn
3 жыл бұрын
Excellent video, thank you!
@PabloOlivare
4 жыл бұрын
Great videos!! Has you a video to config the firewall rules? To protect and drop invalid packages from outside in ECMP mode. Thankyou
@qurantopics9776
4 жыл бұрын
sir your videos are so helpful can you please tell can we do load balancing of 10 wan with same procedure???
@samuel.montgomery-blinn
3 жыл бұрын
Yes, just follow the steps again and again for each router (set up IP, NAT with masquerade, IP routes gateway, IP firewall input mark, output mark, and finally route from mark to WAN gateway).
@keepthebasicshop
4 жыл бұрын
Thank u my friend. God Bless.
@mubashirshah-b7l
Жыл бұрын
Hi hope things are good.Can you breif which mikrotik model is best for load balancing?
@phnompenhtechnology7987
4 жыл бұрын
Gread vidoes. If We have 2 or 3 Lan, Example: Lan1(IP:10.10.10.1/24) Access to WAN1 and Lan2(IP:20.20.20.1/24)&Lan3(IP:30.30.30.1/24) Access to WAN2. How do we configure to access to internet?
@jeytis72
4 жыл бұрын
Good. Anyway, I have some problem at making OPENVPN work if load balancing and failover is set up. What ca cause the problem? Thanks
@SystemZone
5 жыл бұрын
MikroTik ECMP provides almost 100% reliable Load Balancing and Link Redundancy solution over multiple gateways. Unequal link can also be configured with ECMP.
@ramji812
5 жыл бұрын
Properly work karta hai kya
@SystemZone
5 жыл бұрын
Sure, try yourself and hope you will get result.
@Matt-ij4zb
Жыл бұрын
am looking at the same method but using dual WANs which share the same Gateway, please
@khanwazir6940
4 жыл бұрын
sir mikrotik study karnay k leye konsa book acha hoga..thank u
@funnyrabbitadventures
Жыл бұрын
hello thank you for your videos but what if i want to load balance 4 wans which i get from 4 diferent routers via dhcp ? my provider does not provide static ip ?
@alialmohnds
5 жыл бұрын
dear could you please let us know how to choose best wireless channel using snooper and explain the column in it ?
@davidvelc454
3 жыл бұрын
Why you use in route 2x same gateway 192.168.30.1?
@akashdeepbaruah8800
2 жыл бұрын
When i click on new mark routing i am not able to select!It says main only.please hel
@bapimollick2965
3 жыл бұрын
Mikrotik configuration training dete ho ap?
@sudhakars6198
2 жыл бұрын
You have not configured dhcp. In the same how to configure dhcp for lan ip
@kamila3366
3 жыл бұрын
Can I do it similarly with quad wan?
@VineetKumar-re4oo
5 жыл бұрын
Brother Ik help chahiye aapse
@JaZzDeOliveira
4 жыл бұрын
Why do you add WAN1 Gateway twice into the first route? is there a particular reason for this?
@sebastianjuwa1062
4 жыл бұрын
He has different WAN speeds - he added twice so that one WAN would pass more traffic than the secound one.
@zyevenskasaputra7476
4 жыл бұрын
Hi kak.I would like to ask on the ip> route. I have noticed that you wrote two times of 192.168.30.1 . What is the purpose of this? Im currently struggling to make 2 wan sistem with the packet control over games, social media, youtube, browsing ,dowload and upload for 45 people which has 4 devices minimum on each person. What system should i use between ecmp with fail over or load balancing with fail over? Note: playing games and download are priority. Thanks kak. Your help is appreciated.
@k4rd1
4 жыл бұрын
In theory adding the 1st gateway twice (2x 192.168.30.1) and 2nd gateway once (1x 172.30.30.1) would route outgoing connections twice on the 1st gateway, and once on the 2nd gateway. So twice as many connections would go out on WAN1, than on WAN2.
@seeeseses8139
5 жыл бұрын
In most cases, if one wan device fails to provide internet. Mikrotik will fail to provide internet. Is it the same with this configuration too? Or this solves that problem?
@samuel.montgomery-blinn
3 жыл бұрын
This is solved by ensuring the "ping" check on each gateway.
@artbok
5 жыл бұрын
what model of Mikrotik Router is good for load balancing?
@SystemZone
5 жыл бұрын
any Routerboard can be used. It absolutely depend on your load/user.
@alucard77719
5 жыл бұрын
What is your prepared option for unequal WAN links that do load balancing and link redundacy? will it be PCC or ECMP?
@SystemZone
5 жыл бұрын
ECMP and it is provide almost 100% reliable load balancing.
@Mi_Fa_Volare
4 жыл бұрын
IPv4 adresses are not reachable
@farhadmobilesolutions8610
5 жыл бұрын
Please make 4 wan PPPoe out with PPPoe server load balancer
@SystemZone
5 жыл бұрын
OK, I will do it in my next video
@farhadmobilesolutions8610
5 жыл бұрын
@@SystemZone thanks bro
@farhadmobilesolutions8610
5 жыл бұрын
Sir I am waiting for your next video... 4 PPPOE OUT with load balancer PCC method
@SystemZone
5 жыл бұрын
ECMP is not less preferable than PCC
@farhadmobilesolutions8610
5 жыл бұрын
Yes brother don't have so much knowledge about mikrotik I will try this but the problem is that I need with PPPOE OUT
Пікірлер: 49