boss salamat sa tutorial noon tingin ko ang hirap ng basic config ng mt ngayon parang gusto kunang ako mismo mag config.salute
@dragoslavmarkovic2269
Жыл бұрын
Excelent tutorial. Well done !!!
@user-sl1yt6xz7h
3 жыл бұрын
thanks you bro it's a perfect job
@hagridsbeardguy1399
3 жыл бұрын
Hello! Brilliant tutorial, thanks. Please guide me through making "WAN1" primary and "WAN2" secondary. In my setup, WAN1 is unmetered, and WAN2 is a metered connection which I am using for failover. I want to modify this configuration to only use WAN2 when WAN1 is down. Thank you.
@robertjallah9473
Жыл бұрын
This Woww. Thank you l love this one it is very effective
@briansayi
2 жыл бұрын
I did this confing and it works well. I can only remote access the MikroTik on WAN1, not on WAN2. I mean, it is not possible to remotly access the MikroTik on WAN2 with its Public IP address, unless I disable WAN1. In my config, all WAN have Public IP addresses. How can I remotly access the MikroTik on WAN2 Public IP address without disable WAN1 ?
@briansayi
3 жыл бұрын
Verry good Job Tanks
@miko192837
Жыл бұрын
I have a question, if sending is faster, so by uploading one large file to google drive we will do it faster?
@eloiano7945
2 жыл бұрын
Maraming Salamat po sa tutorial.... 100% working po. Ask ko lang po kung bakit kaya hindi nagmerge ang Upload? Ok po sya sa Download speed pero sa upload po hindi nagmerge. Salamat po
@TheHeLLsSs
2 жыл бұрын
Hi, thanks for this perfect movie, but i have problem how you forward port ? I have webserver behind this multiwan, do you know how allow my 80 443 TCP port ? Thanks
@Zhunri29
3 жыл бұрын
tanong lng sir pano yung same ang ISP na x.x.1.1? pag nag add ako sa Address list same silang x.x.1.0/24 hnd pwedeng same ang name nila pano yung pag gawa sa mangle accept need ko b gumawa ng dalawang accept rules ? salamat sir.
@SLELECTRONICSCO
8 ай бұрын
excellent
@DangerD222
2 жыл бұрын
How i can make port forwarding for both wan?
@raiffysampaio7012
Жыл бұрын
How can i have the two ISP active at the same time? I had two different ISP, each one with public IP and i have a web page that i wan't to be reachable from both IPs at the same time. The problem is that i can't get the two links active at the same time, even with Load Balance, the traffic get divided between the two links, but my domain that i pointed to the two IPs only reache by the active link at the time.
@day5dub516
4 жыл бұрын
bihira ang ganitong nagsi-share nang walang kapalit :) salamat po
@wifilabxyz
4 жыл бұрын
watch out for the dhcp setting, it is easier...
@jemrixairfiber1749
Жыл бұрын
@@wifilabxyz sir thanks for the tutorial, but im confused po kc di po nag set ng dhcp clients para ISPs, just asking lang po?
@directtuts8799
2 жыл бұрын
Sir working po. Pero may idea ka kung pano ma priority si WAN1? Minsan kase si WAN 2 yung nauuna then mataas ang speed. Yung WAN1 ko kase PLDT fiber then yung WAN2 naka postpaid lang. Need ko po ma priority lang si WAN1
@edsonormmota
Жыл бұрын
Does it works to SSL HTTPS?
@KuldeepBarodiya
5 ай бұрын
sir can we speed double on RB75GR3 with same ISP 200mbps + 200MBPS= 400mbps ?
@user-di5mz1sg7x
7 ай бұрын
hello! hoping there is a configuration on this on version 7
@rizalfatchu3717
4 жыл бұрын
request untuk forwading ip publik ke ether1. jika ether1 menggunakan astinet dan ether2 menggunakan indihome.. terima kasih
@DaveIgot
3 жыл бұрын
Sir Static + DHCP po pwede ba?
@Nightwish-me8fx
3 жыл бұрын
Sir paano ang quee nito ? naka global ba ang parent nito?
@DangerDD
2 жыл бұрын
Works fine except maximum speed is 100Mbit/s while both internet connections is 1Gbps... Is there any way to fix that?
@wifilabxyz
2 жыл бұрын
upgrade your router to a high end model. i believe they have 10gbps CRS available.
@DangerDD
2 жыл бұрын
@@wifilabxyz I have mikrotik hex, if I use 1wan, speed is ~960mbps, with your config only 100mbps
@wifilabxyz
2 жыл бұрын
hmm seems like a port issue coz u are getting 100 exactly.
@DangerDD
2 жыл бұрын
@@wifilabxyz the only difference is that i've set bridge for ports 3 4 5 so i can use them all, just checked, if i set only one port for lan, speed is okay... Is there any way to use rest of ports?
@wifilabxyz
2 жыл бұрын
i dont think so with bridging ports together, throughput will become less if u do that. the only option u need is to add a switch.
@briansayi
2 жыл бұрын
PLEASE ADVISE !!!
@nasirsharif2000
Жыл бұрын
Wow Thanks how to make wan1 primary wan 2 secondary
@ferdinandtorres7639
3 жыл бұрын
boss gagana po ba ito sa parehong ISP na pldt fiber??papano kaya po iyun eh parehas naman po ip nila na 192.168.1.1??maraming salamat po..ganda ng tuts nyo dito sa vlog nyo..kaso naguguluhan ako kung gagana ba xa if ever gawin ko po ito sa parehong ISP at parehong IP addresses..
Пікірлер: 55