I like the disclaimer at the beginning. I know other people also disclose but they try to downplay how that affects them. And that makes them seem so slimy even if they’re honest.
@Matt-xc6sp
Жыл бұрын
It could have used its own “no homo” disclaimer
@slowmo7500
Жыл бұрын
Disclosing and being honest makes them seem slimy? Lol. As opposed to…not disclosing sources of possible bias to the viewers?
@markrenton3941
Жыл бұрын
@@slowmo7500 They have to disclose per FTC regulations. Period. If there was no disclosure rule, how many would voluntarily do so?
@HunterLord458
Жыл бұрын
I think Garand Thumb is pretty good at it. Other people like Sootch00 on the other hand are pretty much just advertising
@slowmo7500
Жыл бұрын
@@markrenton3941 who knows.🤷♂️
@freshjnew
Жыл бұрын
Hop, I think you're an honest and genuine enough guy to tell thousands of people that your buddy made a crap rifle. And if he's any sort of weapon builder he will take honest criticism without having his feelings hurt.
@Hoplopfheil
Жыл бұрын
The better question is: would I be friends with anybody who couldn't make a good rifle? 🧐
@ScumfuckMcDoucheface
Жыл бұрын
@@Hoplopfheil haha
@gtcam723
Жыл бұрын
Maybe people should run spec ammo.
@Orange_pickles
8 ай бұрын
And, he would most certainly tell his buddy his shit sucks too.
@USN1985dos
Жыл бұрын
"No reason I can't have a beer while I do it." This guy. We love this guy.
@BallisticAviation
Жыл бұрын
Re: The Disclaimer at the front of the vid It's nearly impossible to not make friends in the industry once you've been in it for awhile. I think where I personally draw the line is with giant fucking corporations. With a friend who runs a smaller company (like Militaworks), forming a close personal relationship with them where you can give them honest feedback that helps them improve their product is only a benefit and given that you've got a solid track record for being open, honest, and upfront with your personal opinions, I don't think there is anything wrong with reviewing or accepting reviews from friends in the industry.
@highdragguns
Жыл бұрын
*common misconception about A5 REs is that they allow extra length of travel for the BCG, which is not true. The RE is slightly longer than a carbine but the buffer is also longer so the length of travel is the same. However, it allows you to use a rifle length spring in a slightly shorter than rifle length RE so you get a little more tension in the spring opposing the BCG.
@JohnBrowningsGhost
Жыл бұрын
Check out the Tubbs flatwire buffer spring, it’s rifle sized but can fit in a carbine tube, you get basically a5 performance without special buffer tubes and buffers.
@PigPharmaceuticals
Жыл бұрын
Not sure if you'd know the answer to this, but couldn't exactly the same effect be achieved by just using a slightly higher tension spring in a carbine RE? I know things like flatwire springs already exist, but I'm wondering why people seem to like the A5 over higher tension carbine springs.
@talltale9760
Жыл бұрын
@@JohnBrowningsGhost had a carbine tube with a tubs and now I’m using a vltor with the tubs and it’s noticeably softer shooting
@highdragguns
Жыл бұрын
@@PigPharmaceuticals I think you're totally right. Higher tension carbine spring achieves the same thing
@spehhhsssmarineer8961
Жыл бұрын
@@highdragguns maybe there’s less wear on the spring or some sort of durability issue? idk.
@TheRausing1
Жыл бұрын
I am from England and do not shoot anything but the occasional twelve gage and 308 hunting rifle (both for hunting), but I still love these videos. The build quality and attention to detail on these tools and within this industry as a whole is just unmatched. It’s like fine watchmaking.
@Hoplopfheil
Жыл бұрын
I sincerely appreciate that.
@StagFabulous
Жыл бұрын
There are times when I am baffled by the sheer amount of iterations, innovations, minor adjustments, and in some cases truly significant additions, by so many different companies, that the AR-15 continues to receive to this day, in spite of being as old and omnipresent as it is. And then I remember swords.
@newdefsys
Жыл бұрын
The differences between 9310 and Carp. 158 are minimal and both appear in each other's 'substitute steel' list for most applications. The real difference is that Carpenter 158 is a registered trademark of Carpenter Technology Corporation of America, while 9310 was developed in Europe. Both steels share similar characteristics (strength, hardness, toughness) and both offer similar performance (resistance to impact, resistance to abrasion). Both steels are suitable for small arms bolt head applications.
@OniActual
Жыл бұрын
Glad to see people enjoying those rails out there. Used to work for Centurion and made many thousands of the C4 rails and the FCD versions, as well as a lot of the CM4 rifles that are out there.
@hateferlife
Жыл бұрын
After carrying a quad rail for many years just the idea alone gives me heartburn. To each their own tho!
@wolfgang_h3t
Жыл бұрын
I had the longer fsb cutout version of that rail, it's one of the lightest quads you can get tbf
@m118lr
Жыл бұрын
..love quads, and HAVE an M-Lok DD V7p .300 BLK. There’s a place for BOTH. With my DD M4A1 I have the ‘RISII’..wouldn’t believe there’s a better rail than THAT one anyway!
@wisemencompany
Жыл бұрын
Top shelf ingredients in this rifle.
@BattleMage69
Жыл бұрын
you know its a good friendship when you start playing video games and larping together. good on you Hop.
@grantshurtz
Жыл бұрын
One thing worth mentioning - if you’re going to dedicate a traditional high backpressure suppressor to a carbine gas 11.5, you can get away with a MUCH smaller gas port than you might think. My main squeeze rifle is an 11.5 criterion core with a YHM turbo k - buffer is a VLTOR A5-H2 and a sprinco green spring. I bought an ez-tune gas tube from BRT and let them pick the size - they sent me the tube with the .057 port (roughly equivalent to .055-.056 on the barrel). With the turbo k, the gun shoots incredibly soft and 100% reliable, even with steel case ammo. Unless you’re using a very low backpressure suppressor, the truly optimal point for tuning is so far apart between unsuppressed and suppressed that I don’t think it’s worth it trying to get an AR set up for both.
@LRRPFco52
Жыл бұрын
For me, I found the Bootleg Adjustable Gas carriers to solve those different port flow requirements for me. It has 4 positions that can be set with a small flat head screw driver through the ejection port. You don’t even need to disassemble anything. I put 3 of them some of my 6.5 Grendels. I have no affiliation with the company other than customer. Wish they would have been around a long time ago.
@Dregkar
Жыл бұрын
Man I had no clue ALG discontinued their rails. That's extremely sad to hear, the first AR I ever built (and only one I own) has one and it's one of the few components I've never considered changing. Easily over 20k rounds through that AR and almost every other aspect of that rifle has been changed over the years except that rail because it's just perfect.
@jonathanwick1265
Жыл бұрын
Simple. Bill just wants to sell his $300 rails.
@sluttybutt
Жыл бұрын
Look into apex gatorgrips for the next best thing
@Dregkar
Жыл бұрын
@@sluttybutt Hey thanks for that rec, those look solid!
@m118lr
Жыл бұрын
REALLY nice build. Very high-end, I’d be thrilled with it. Seems NOTHING’S been left to chance for a quality AR. As for the ‘extras’..great call on the list of those mentioned EXCEPT FOR..the SB4. Personal choice there for me. Everything from the SF light, Arisaka mount, the handguard TO the Vltor A5 b/tube, VERY nice. Great video and editing to boot!
@brettbaker5599
Жыл бұрын
SB4 might be legal after the new brace rule.
@NCrdwlf
Жыл бұрын
I’m glad to see a quad rail . This looks like a nice carbine . It’s ok to have friends that make good shit . Don’t apologize for that .
@ClubPenguinMaster88
Жыл бұрын
I've owned a Militiaworks rifle for a couple years now. Personally bought it through the guy. Great rifle, genuinely, and had zero issues with it.
@EastCoastMan603
Жыл бұрын
Is this the: “we have mk18 at home”. This thing looks awesome. Great Job Hop, I honestly don’t have to tell your father this time. Seriously Awsome rig. Thank you !
@Theserratedbagel
Жыл бұрын
What I learned most of all from this video is Hop is old enough to drink
@Hoplopfheil
Жыл бұрын
What makes you think that
@Theserratedbagel
Жыл бұрын
James would never let his child break the law
@camojoe83
Жыл бұрын
Yeah, and about as authentic as Liz Warren about doing it.
@danielhenderson8316
Жыл бұрын
@@Theserratedbagel James needs Hop sober so he can blow in Daddy’s Ignition Interlock to drive home.
@randyb4191
6 ай бұрын
This man's shave is suspiciously sat
@MrRedrooster53
Жыл бұрын
MW Quad gang stays winning once again.
@stevemc6010
Жыл бұрын
toob 🌚
@A1Retro42
Жыл бұрын
Tell bingaling I said hi
@andrewhofmann7308
Жыл бұрын
Hop, I’m not sure if I should thank you or be upset. I just spent over $1200 building an (almost) complete receiver set from militia works because of this video 😂
@taprackmiss4613
Жыл бұрын
IYKYk for sure on that peak of replays at 6:10
@schizosaint777
Жыл бұрын
Militaworks is the best, great guy that runs it too.
@nastysoda9212
Жыл бұрын
?? They didn't make anything dude, they just put parts together. You can do the same
@schizosaint777
Жыл бұрын
@@nastysoda9212 I can guarantee if I bought all the same parts and put it together myself it would not be as good. I’m not a total idiot, but I don’t have access to a proper shop and am not as autistically focused on detail. The final product would have issues, whereas I doubt that with these.
@nastysoda9212
Жыл бұрын
@@schizosaint777 It's a lot easier than you think, and you would have it exactly how you want it. Even in the video he had to swap out buffers and dial it in to his liking. Also paid a massive premium for no reason wwhich could have gone into a better trigger or optics.
@baconatordoom
Жыл бұрын
@@schizosaint777 if you buy all the same exact parts and put it together. Then it not turn out as good. Then you probably are a idiot. Even a child can put a small Lego kit together correctly. It's a AR not a custom 1911 or AK where the final fit and finish determine the final product. You don't need a big shop and tons of tools to assemble a AR put together with pre manufactured parts.
@blue6gun
Жыл бұрын
The reasoning behind the Centurion/FCD rail is similar to why i initially went with a Daniel Defense Omega 9.0 quad rail, tho i specifically went with it since it works with a delta ring and doesnt hinder a fixed FSB nor did it require the sight base and handguard cap to be removed for installation. The fact that it only works with factory barrel nuts was a bonus. The gun never got setup for low light/night stuff like i had planned on though cuz my wife shot it on its first day at the range, decided she wanted it, but didnt like the quad rail lol. I threw a drop-in mlok HG from B5, so it definitely isnt going to hold a PEQ or DBAL solid enough to bother trying.
@stevej9636
Жыл бұрын
............. put a pic rail section on it and then put an atpial c (peq's are not available to civilians ) the d bal needs a metal rail section to grab properly the atpial will work on a kydex pic rail section.... so basically you are just making BS excuses
@Hoplopfheil
Жыл бұрын
@@stevej9636 mlok pic rail sections do not hold zero
@stevej9636
Жыл бұрын
@@Hoplopfheil LMAO they work just fine for me Hoss, you are talking to a gun smith btw so dont try to argue, i have a lot more rounds under my belt than you do. try some Loctite on those threads before you install the pic rail buddy, that means you got to take it apart and actually apply the stuff to the threaded screw that goes in the locking device so that the vibration from the barrel doesn't cause it to come loose. same with optics. furthermore the top rail is always solid so you could just mount the device on the top if you just cant trust the Loctite. quad rails were replaced to reduce overall weight with all the gadgets on board, but just like anything that is held on by screws, you need thread locker.
@johnmuir8305
Жыл бұрын
@@stevej9636 Hmm do I listen to NSWC Crane or some random dipshit gunsmith, which is barely a real job? I think I know my answer to that. MLOK isn't going to hold zero, it's not designed to.
@ravioliformuoli520
Жыл бұрын
@@stevej9636 I was about to lookup some product I was going to buy for my AR, then I read this stupid comment and it made me forget. So thanks Stevie Wonder the "GuNsmIth" Hold that zero hoss dog.
@ThereIsNoSpoon4
Жыл бұрын
First AR I bought was a factory build. I ended up replacing every single part (including receivers) on it except the buffer tube and spring. Was literally able to rebuild the gun out of my scrap pile. Gun had alot of problems from the factory, burred feed ramps, gas block misaligned etc. Not sure if I'll ever buy another factory built AR to be honest. After building several AR"s I honestly don't think there's anything they can do better in a factory than I can do in my garage. I've never had a single problem with any AR I've built so far. Just do your research and buy good parts. Great video btw.
@calholli
Жыл бұрын
This look reminds me of my Sig 516 rifle. I got a 516 upper on g-broker late 2019, just before the plandem^c/ for only $340 shipped. I threw it on a basic forged Anderson lower with PSA kit parts and it has been a killer piston setup for dirt cheap. I have a 10.5" that I put an Osprey piston kit on, that still has std handguards so I can actually shoot it a lot. People seem to underestimate how bad the new modern rails heat up. I still tend to like a good STD handguard or quad rail myself; even though I do have a dozen modern style rifles too.
@ElTejon47901
Жыл бұрын
From a neighbor of Crane NSW I bring you greetings and congrats on a great video.
@akmarksman
Жыл бұрын
Those Unbranded Ambi lowers are really nice, I plan on picking up 1-2, probably with next years tax return.
@jakehorvath9001
Жыл бұрын
It's neat. Cool to see what different companies do. Not super interested in it, but I like seeing new configurations companies make that may have slight benefits in certain areas.
@ricktenter1631
Жыл бұрын
Nice set up man, great video. Thanks for the information!
@mr.lovell3645
Жыл бұрын
You need to try the Wrenchman mlok rail...there was two versions...one version had a longer barrel nut to have a more rigid rail. Sadly, I think only the smaller barrel nut version is available, but if ANY Wrenchman is available, buy it! It's rail was so snug, I had to use a hair dryer to install it and it is solid! It was made by PWS for Brownells.
@NonyaDamnbusiness
Жыл бұрын
Nice Marathon GP watch. I wear the Navigator myself but also have a Stainless Steel GP Manual.
@CliftonHicksbanjo
Жыл бұрын
06:20 LOVE the fixed front sight post!
@w.w.9047
Жыл бұрын
A noble spirit embiggens the smallest trigger guard. Look it up! It’s a perfectly cromulent build technique!
@M81_WOODLAND
Жыл бұрын
I'm glad you brought up Midwest Industries rails. They make a decent product as far as quad rails...but boy are they FAT. I had a drop in set that I later sold because they were just TOO pregnant for me.
@abefroman4953
Жыл бұрын
Thank you for the disclaimer. I'll keep an eye on them when I buy in the future.
@macrux152__8
Жыл бұрын
I love the rifle and how it was made.
@theREALdingusMD
Жыл бұрын
Comparing this to the ol’ HOP-15 is night and day. One hell of an improvement. Nice gun dude.
@ALovelyBunchOfDragonballz
Жыл бұрын
I like it. Personally doing an ambi bolt-release seems like a waste of a potentially good ambi bolt-lock/release, but that's just me. I'm looks for an LMT lower to swap with my milspec, and I run an A5 so I'm glad to see that on here.
@joegasparro2395
Жыл бұрын
I use BRT barrels, discovered them a year ago, very good. They also invented adjustable gas tubes, dont have one, but look like a good idea.
@flubdreload2818
Жыл бұрын
I don’t believe their tubes are adjustable. They just make custom sized gas tubes to work in tandem with your specific port size and ammunition to create as smooth of a shooting experience as possible.
@jimyeats
Жыл бұрын
Flub’d is correct, its just a gas tube with a smaller hole for folks who can’t easily use an adjustable gas block (such as someone with a pinned gas block or a fixed front sight block). Its not meant to be a go to device, its sort of a work around if you have a gun that is over gassed and you also cant use an adjustable block.
@joegasparro2395
Жыл бұрын
@@jimyeats yeah, I know what it is, I was lazy with my wording, but you are correct. The tube is not "adjustable", you get on their website and answer a series of questions and they make a gas tube with a smaller diameter for your particular overgassing issues.
@MatterMadeMoot
Жыл бұрын
Neat. Appreciate the honesty about your affiliations, pretty sick rifle too man
@StEvEn420BrUlE
Жыл бұрын
Hop do you think it's more worthwhile to do a bit of research and put together a gun from the ground up, or just buy a more boutique version like this militia works? I just build my own from the ground up, and it was bit of a headache trying to source all parts and get everything put together, but it also handles EXACTLY how I want it to. I dunno seems like an interesting topic of discussion
@Hoplopfheil
Жыл бұрын
I think every dude should build at least 1 AR to learn the platform. But at some point you may want to just click one button and get a nice, proper rifle. In my experience most AR home builds end up with some idiosyncratic parts on them.
@swiftaudi
Жыл бұрын
I built my first AR to save money on a high ended noveske. It allowed me to put the parts I wanted on it rather than buy a whole gun and then replace parts.
@sluttybutt
Жыл бұрын
Building your own ARs is the quickest and costliest way to learn you should have let a good builder make your first. I'm not upset that I have only ever built my own or that I own more tools as a consequence, but it for sure cost me a LOT of time and money to start approaching the level of knowledge that MW has. And forget about SOTAR etc. I didn't even fuck up, my builds came out great and I still learned I don't know shit
@swiftaudi
Жыл бұрын
@@sluttybutt Well being a mechanic I wasn’t scared nor did I need many tools. What concerns me is that a lot of teachers tell horror stories of home builds failing during classes. Factory builds tend to be more reliable seems to be what I keep hearing. I’m going to run mine through a class and see what works and what don’t. I know my weak point is my adjustable gas block so I’d like to figure something different there.
@jackbauer4186
Жыл бұрын
It will take you at least 4 or 5 builds to figure out which parts/features that are actually reliable and worthwhile. But that time, you could have probably bought 2 very high end, off the shelf platforms and saved yourself a lot of hassle and frustrauion.
@JaredPirrie
Жыл бұрын
Big fan of Hop cracking a beer after saying he “cant” be unbiased.
@rampager89
Жыл бұрын
Hop, please spill the beans on the best AoE2 match you had with him. PLEASE 🤣
@Asdf-wf6en
Жыл бұрын
You should make a video talking about bolt carrier group autism. Get into different kinds of steels, finishes, companies, etc.
@GraysonSoper
Жыл бұрын
That subtle little "iykyk", yeah man we're tracking, good point out!
@LiveFreeorDive87
Жыл бұрын
I can't wait to get my fixie i put an order in the other day.
@N-A762
Жыл бұрын
I ran a stock buffer tube and h2 buffer initially on my 11.5 URGI upper. It failed to lock open a few times which bothered me alot. I threw on a A5-1 buffer and its amazing. I am convinced it really increases reliability while also making it smoother!
@DutchK75
Жыл бұрын
Vltor A5 system was intended for the M16A4. To give a collapsible stock to smaller stature shooter in the Marines. It's a fully vetted system.
@carls2210
Жыл бұрын
I love my 12.5 BRT barrel. I only have close to a thousand rounds. But its pretty solid so far. And 100% suppressed.
@johnsheppard7175
Жыл бұрын
Having buddies that build quality ARs is nice. My home boy at Cow Dog Arms is gonna help me set up my SPR build.
@basedWisco715
Жыл бұрын
Never thought I’d spot a regard in the wild 😳
@johnsheppard7175
Жыл бұрын
@@basedWisco715 I'm really hard to miss.
@Mrgunsngear
Жыл бұрын
🇺🇸
@nickybjammin7629
Жыл бұрын
That’s how it’s done this guy is awesome.
@rupert916
Жыл бұрын
I still have an old C4 centurion I got from bcm back in the day
@zacharyyoung3834
Жыл бұрын
I’ve been very interested in their products. Just with they would release the lower on its own
@Hoplopfheil
Жыл бұрын
You can customize and order just a lower from MW if you want.
@rondobrondo
Ай бұрын
@6:57, operation green skies lmao, glad you know about that, I have a DEA patch for operation Green Skies
@wonderloaf
Жыл бұрын
Hi Hop, I'm enjoying this video while eating some English muffins.
@Hoplopfheil
Жыл бұрын
Me too but I put peanut butter on them.
@wonderloaf
Жыл бұрын
@@Hoplopfheil That's too powerful for me
@BlueLoneWolf54
Жыл бұрын
@@Hoplopfheil English muffins don't deserve peanut butter.
@wonderloaf
Жыл бұрын
@@BlueLoneWolf54 You deserve it, you deserve love
@BlueLoneWolf54
Жыл бұрын
@@wonderloaf English muffins are for when you can't get biscuits. Our biscuits not your biscuits. Though cookies for breakfast sounds great anyhow.
@AlexDenton0451
Жыл бұрын
Hey Dane also sold me a 13.7 gun too! I'm at 700 rounds, I'm gonna make a video when I get to 1000 myself to also vouch for it. All this from joining Brass Facts' server lol. Edit: lol my buddy who works at LMT immediately shit all over it, said the stake job was blown out and many other gripes lol.
@lukasgoza4493
Жыл бұрын
That's an "Unbranded AR's" lower! I've been looking into getting those built for my company as well!
@SamSung-jn5fi
Жыл бұрын
Where's the old Hop? This Hop is too handsome 😍
@bravo6959
Жыл бұрын
True
@Heywoodthepeckerwood
4 ай бұрын
Noice. Rifle. I made my 14.7 my do everything rifle. It’s a piston LWRC A5, eotech exps3-4 and g45 magnifier, surefire 640DF Turbo, full power PEQ-15 and a Saker 556k suppressor. She’s chonky (11.5 pounds.) but she’s capable and she is mine.
@jknewb6276
Жыл бұрын
SE Idaho here, Utah is just right around the corner...
@EdwardZhou_TJOL56
Жыл бұрын
Can really appreciate companies that know when to not reinvent the wheel. Using BRT barrel, VLTOR A5 RE, FCD/Centy rail, and other industry leading parts makes it really nice instead of say Sig which has to make literally every part but worse and says TREAD That being said, I'm at the point in AR buying that I'd build this instead of buy it
@zombiegeorge749
Жыл бұрын
This guy made a friend.
@Osprey1994
Жыл бұрын
You aren't unbiased, but I think it's rad you made a friend bro. Good shit!
@JohnBrowningsGhost
Жыл бұрын
Sling QD points in a rail are a complete waste unless they use steel inserts keep the aluminum from rounding out from hard use imo. Homies should look into flatwire springs, imo a better value than an a5 system for very similar performance.
@Hoplopfheil
Жыл бұрын
The Centurion rails have steel inserts, the Midwest rails don't. The old ALG rails didn't have reinforcement, I always liked to put Magpul paraclip adapters in them instead.
@JohnBrowningsGhost
Жыл бұрын
@@Hoplopfheil Good to know, I’ve got an mcmr that I’m getting tired of and I’ve been looking at centurion. /arg/
@bigracer3867
Жыл бұрын
Greatest gun review on yt!! Wish you did more. No jumping around and crazy crap. Just a down to earth guy and just a touch of sarcasm! 👍
@indianOutlaw87.5
Жыл бұрын
Pro youtuber over here dang
@chadwik4000
Жыл бұрын
Is there a advantage to a chrome lined barrel over one that is QPQ? On paper (literally, issue #13 of Recoil, which was the first issue I ever bought, had a article on firearms finishes which included a 'tale of the tape' comparison chart) they are very evenly matched. The only things I could think of would be a accuracy advantage for QPQ and maybe the chrome being more resistant to heating up? This has become my top guntube channel, no bullsheet
@mrwiskers101
Жыл бұрын
Chrome lined rifling should last for more rounds than QPQ before the rifling wears out.
@Falconguygaming
Жыл бұрын
@@mrwiskers101 why
@mrwiskers101
Жыл бұрын
@@Falconguygaming Chrome lining is physical more durable than QPQ (salt bath nitride). So if the material is physically stronger, it will take longer to wear out.
@danielhenderson8316
Жыл бұрын
On the other side a Nitrided barrel has been cited as being more accurate as the process is a metal treatment instead of adding material to the barrel. Pick your poison.
@mrwiskers101
Жыл бұрын
@@danielhenderson8316 Also a very good point!
@cajuncarry
Жыл бұрын
great looking gun
@isaac6705
Жыл бұрын
One of my rifles is one of those 12-13 pound range with less capability ones. Sling, magnifier, red dot, and Modlite. The problem? LMT LM8 upper has a 16 inch heavy profile barrel. Any more weight added is just silly, because it's already so forward heavy, so I don't bother using it with NV.
@rookie3315
Жыл бұрын
I would love a quad rail on it, it looks so cool, do you know if they will make a quadrail version and a slightly longer barrel ?
@Hoplopfheil
Жыл бұрын
You should be able to get a 13.9 with the quad rail
@ColinOnYT
Жыл бұрын
pretty badass
@harryballsagna2418
Жыл бұрын
NO GRIP GANG
@shellshock98
Жыл бұрын
What a cromulent video, thanks Hop
@randalljeffs7272
Жыл бұрын
Restless AR syndrome. I felt that
@ThinLineDefenseCo
Жыл бұрын
Cool setup!
@StealthTiger99
Жыл бұрын
Rad looking rifle… *sees DA Dragon Egg Backpack* ah a man of culture
@Valorius
Жыл бұрын
Seems like you got exactly what YOU want and that's all that matters.
@michaellamas1497
Жыл бұрын
QUAD RAIL! QUAD RAIL! QUAD RAIL!
@TheJetlife94
Жыл бұрын
bcm makes a good steel picatinny qd mount
@SuperXrayDoc
Жыл бұрын
If you tune it right a vltor A5 buffer with a suppressor is the smoothest shooting gun ever. Went with it on my LMT specwar build, it helps that its a midlength gas system too. I don't know what spring it has but I'd recommend a Tubbs flatwire
@Gatman0311
Жыл бұрын
As a Wisconsin native I have never heard of this company. I clearly am under a rock 🥴
@DR-hc4im
3 ай бұрын
Hop love the video, looks like Ana amazing setup, I love quad rails. How's the accuracy of thta BRT barrel?
@rickypickles2219
Жыл бұрын
For a few years now ive hunted for the ultimate do it all/shtf rifle. Tanky and reliable…then i realized. Just get a ddm4a1.
@MarketAndChurch
Жыл бұрын
It's too late for me in Oregon to get one of these, but if I ever move to Idaho, I'm going to get one.
@rmshoots91
Жыл бұрын
Gun manufacturers paying for Hop's review: "Wololo"
@irafowlerjr.7492
Жыл бұрын
Nice carbine, thanks
@TL8311-j6x
Жыл бұрын
I want one but 12.5"
@AlexDenton0451
Жыл бұрын
Ask Dane for it, I got the JOE in a 13" config.
@Haitch_Kay
Жыл бұрын
What's your beer preference, Hop?
@gunfreak9mm
Жыл бұрын
Thanks Hop, always enjoy your no B.S. to the point reviews and AR build info.
@Shark-sh0t
Жыл бұрын
Couldn't help but notice the Dragon Egg 🐉🥚
@1ice3690
Жыл бұрын
The c4 rail is bomb proof
@joemo1033
Жыл бұрын
SHILL! SHILLLLLLL! Buying one. Thanks.
@realfnneato3111
Жыл бұрын
My only problem is why would I pay 1600 for this rifle when I could buy an LWRC or bite off a little more and grab a DD mk18? the quality seems to be there, but the urge to spend an excess of 1500 dollars on a midrange gun with more milspec features? Your treatise on the Centurion c4 convinced me to buy one, but shouldn't the rifle ship with a proper quad rail, as it ships with several other high quality upgrades like the ambi controls and the buffer?
@spacecaesar7619
Жыл бұрын
It’s lighter than an LWRC and a DD MK18 while being significantly better gassed and constructed to a higher standard of QC with more modern parts than either.
@realfnneato3111
Жыл бұрын
@@spacecaesar7619 reasonable, I'll check this out when it releases
@danielhenderson8316
Жыл бұрын
You also get more option on the build sheet with triggers, muzzle devices, and other items instead of pulling all of that off and adding your own stuff to it.
@realfnneato3111
Жыл бұрын
@@danielhenderson8316 very good point, these are a lot more like a quality custom made tailored suit than an off the shelf Armani
@jimyeats
Жыл бұрын
Having friends is nice.
@19Clutch69
Жыл бұрын
very informed review...
@mtgAzim
Жыл бұрын
Have you ever played ZPC? I had it when I was too young to understand anything, so now it lives in my memory like fragments of a fever dream. You know how there are those derivative DOOM type games? Well ZPC seems to be a similar thing, but built off of Marathon rather than DOOM. Considering that you're one of the increasingly few people these days who is quite familiar with Marathon, it'd be interesting to hear your take on ZPC.
@Hoplopfheil
Жыл бұрын
I have a copy of it actually.
@OFCINC
Жыл бұрын
3:00 thats enough gas to start a car sheesssh
@gtcam723
Жыл бұрын
Diameter of these rails matters some too. Obviously larger requires more material, but look at those Aero Enhanced Gen 2 things that allow burying a can under them. Also; this dude sounds like a man after my own heart where his builds are concerned. Felt that “restless AR syndrome” quip
@docternoblex
Жыл бұрын
Could you do a vid on gas busting charging handles? I heard you mention it and now I’m curious
@Hoplopfheil
Жыл бұрын
Yep something is coming up soon. I have a quite gassy project gun in the works and a bunch of charging handles to compare.
@docternoblex
Жыл бұрын
@@Hoplopfheil way cool man! Also as a side question: with gas that gets blown back into the system, do you think that a suppressor on a “true dissipator” would help to alleviate the under gassing that most have?
@Hoplopfheil
Жыл бұрын
@@docternoblex Yeah it more or less adds some bonus dwell time to the system.
Пікірлер: 459