This video actually helped me understand how the bridgeport style powerfeed worked. Excellent
@TinkeringNerd
4 жыл бұрын
Thanks for your kind words.
@nbrewno
3 жыл бұрын
Great find on the speed adjustment knob moving with the direction lever. Good observation skills and great video.,
@TinkeringNerd
3 жыл бұрын
Thank you for watching!
@6milesup
5 жыл бұрын
Good video! Thank you for putting it together. "I hope I paid enough to see some action down the road". LOL. That's what I told my wife...;)
@TinkeringNerd
5 жыл бұрын
Good point, lol :)
@kentdixon5716
5 жыл бұрын
Really enjoyed your video, am thinking of getting a mill/drill and wondered how much work to install power feed, Now I know, very good explanation and filming, good sense of humor as well ha ha. Thanks for posting.
@TinkeringNerd
5 жыл бұрын
I appreciate you watching! Cheers.
@howetyr
4 жыл бұрын
You made me chuckle! Thank you. And well done.
@mrjay2184
Жыл бұрын
Great job 👍🏾
@mikehauer7463
4 жыл бұрын
Thanks for taking the time to share this info.
@TinkeringNerd
4 жыл бұрын
Mike Hauer thank you for watching
@matthewpeters325
5 жыл бұрын
Good video. Thank you for sharing ur new toy with us.
@TinkeringNerd
5 жыл бұрын
Thank you for watching!
@chrismac2264
5 жыл бұрын
Great video, saved me a lot of time. Thanks for posting!
@noisytim
4 жыл бұрын
Thanks for making this video. I will be converting an engraver to a milling machine soon. Your videos are a great help and inspiration or the planning!
@TinkeringNerd
4 жыл бұрын
Tim E thank you for your support!
@MrSteppingstone888
2 жыл бұрын
Excellent video, really done well , Thank you for doing it you helped a lot of people who are learning as they go.👍👍
@TinkeringNerd
2 жыл бұрын
You’re welcome and thank you!
@briansequeira8301
4 жыл бұрын
Very helpful. I am installing an ALIGN to my X axis, its almost the same as your ALSGS. The instructions are pretty poor, thank goodness for KZitem Vids like yours.
@TinkeringNerd
4 жыл бұрын
Thank you for watching
@rickcromwell7800
Жыл бұрын
Outstanding review.
@gregvanzant8275
2 жыл бұрын
Good information,Thank You
@TinkeringNerd
2 жыл бұрын
Thank you for watching!
@TH-pg9hn
5 жыл бұрын
Nice video, lot of help when install this kind device. Thinking to buy samekind chinese unit to my old milling machine. Thanks.
@chrisfournier6144
2 жыл бұрын
Very well made video and careful installation. Your humour even made this entertaining! Well done Nerd! I just took a closer look at my Chinese clone unit to see if the drive bevel gear was not indeed supported on both sides. Mine is but a bright light and a feeler was needed to confirm this. Perhaps yours is too?
@SunSetAutomacao
Жыл бұрын
Thank you for posting this video, well explained, quiet and calm to talk. parabens. I have a faulty power feed it doesn't move to the left side, maybe you can help me. Where can I find the electrical schematic for the power feed. Nilson I'm from Brazil South America. Thanks.
@TinkeringNerd
Жыл бұрын
Thank you. I don’t have the schematics for this unit and I don’t know where to find it, sorry. It sounds you may have a bad switch to go to one side. That would be first thing I check. Cheers.
@BIGDADDY012341
3 жыл бұрын
Great video !! Thanks for posting !
@scroungasworkshop4663
3 жыл бұрын
Great video. Good enough for me to subscribe. Cheers Stuart 🇦🇺
@InfiniteCraftsman
4 жыл бұрын
Glad I saw this. Solid observations.
@rollerco
4 жыл бұрын
Great to the point video.
@TinkeringNerd
4 жыл бұрын
Thank you!
@Turb0esky
3 жыл бұрын
Good video. Very helpful!
@klasjonsson6325
4 жыл бұрын
Hi. Very nice video. i have a STOREBRO Combi mill that has a x axis power feed origional but it is broken beond repair. so i am thinking on buying the same as you. bur i supose it is for bridgeport mill. so i wonder do you know the measure on the pin bearing ? on my mill the pin bearing is 1 inch
@evanpatton2030
4 жыл бұрын
Good video. Learned a lot!
@TinkeringNerd
4 жыл бұрын
Thanks a lot!!!
@ronmenzies362
11 ай бұрын
Hi great video thanks, what do you mean about the drive bevel gear not being supported
@TinkeringNerd
11 ай бұрын
Thank you. This unit has the bevel gear shaft “up in the air” without another bearing at the top of the gear.
@ronmenzies362
11 ай бұрын
@@TinkeringNerdis the bevel gear slide on to the shaft that it turns with the keyway, where else can it be supported
@TinkeringNerd
11 ай бұрын
@ronmenzies362 it is supported at top of the shaft in better made feeders.
@rakshithgowda7665
6 жыл бұрын
It was fentastic I liked it and I subscribed your channel
@taylor4386
3 жыл бұрын
Nice informative video. 😀
@jasoncox6245
2 жыл бұрын
Looking at getting one of these for our mill, but cant find the speed settings; do you know how fast each number makes it go(As in, #1 is 10 inches per minute, etc?) Thanks!
@TinkeringNerd
2 жыл бұрын
The speed is not regulated and varies with load on the table. Digits on the dial scale are arbitrary. So, it’s impossible to guess the actual speed at any given moment. It’s all based on how it feels/sounds. Cheers.
@silverlakepinckneymi
4 жыл бұрын
can you please tell me the width of the bracket and the motor mounted together. looks like about 2". was going to try to mount it on my Harbor Freight Mill 40939. thanks for the video
@lacaver64
2 жыл бұрын
can I use this power feed for the x y z axis ?
@yellowsupra88
5 жыл бұрын
Great video thanks.
@TinkeringNerd
5 жыл бұрын
Thank you for watching!
@You-can-fix-it-yourself
3 жыл бұрын
Good review. No fluff, just the important stuff. Will this unit work on the "Y" axis also?
@TinkeringNerd
3 жыл бұрын
Thank you. For Y axis, you will need different mounting bracket, and the lever would be sideways. I think there are specific ones sold for Y axis.
@You-can-fix-it-yourself
3 жыл бұрын
@@TinkeringNerd O.K., thanks for the reply. Keep making videos.
@douglasthompson2740
4 жыл бұрын
Could that power feed be installed on the knee? With some adaptation I am thinking? Interesting videos. Take care. Doug
@TinkeringNerd
4 жыл бұрын
Not sure if it got enough torque to move the knee knob. But, I’m sure it could be installed. Cheers.
@junkmannoparts9696
3 жыл бұрын
IT is now 2121 how is you power feed working i am installing one my self .
@TinkeringNerd
3 жыл бұрын
It’s working as new, I haven’t used it much.
@paulriley5940
5 жыл бұрын
What mill did you install the power feed on?
@TinkeringNerd
5 жыл бұрын
It’s made in China with Taiwanese lead screws. It doesn’t really have a name.. just some model number. It’s 50x10 table vertical mill with square waves on y and z axis’. There is some more about it in my video about how I moved it and how I repaired it.
@alphonsefrascato3342
5 жыл бұрын
The kit you installed is it a universal kit or for a certain brand of mill?
@TinkeringNerd
5 жыл бұрын
Most vertical mills out there are standardized as Bridgeport brand mills. The power feed should work on most any vertical mill. You could ask your seller if their power feed will work on your mill, to be somewhat certain. Cheers.
@guadalupechavez5305
5 жыл бұрын
What's the brand on the power feed?
@TinkeringNerd
5 жыл бұрын
If I’m not mistaken, it’s ALSGS. Cheers
@PettyMower
3 жыл бұрын
I'm curious, would leadscrew backlash effect the distance between the pinion and bevel gears? Thank you!
@TinkeringNerd
3 жыл бұрын
Backlash is originating between the screw and the lead nut. There is no play between the screw and the table. So, no, bevel gear is not affected by the backlash. Cheers.
@PettyMower
3 жыл бұрын
@@TinkeringNerd Thank you!
@44Celt
5 жыл бұрын
What torque rating is this model and how does it cope with general milling?
@TinkeringNerd
5 жыл бұрын
This model 310SX is rated for 450 lb-in. It works for me just fine.
@tonymcdaniel9198
3 жыл бұрын
How do you
@joeygonzo
5 жыл бұрын
Is this power feed still working for you? I'm looking for one for my Clausing mill.
@TinkeringNerd
5 жыл бұрын
I barely use it, but, when I do, it works fine.
@TinkeringNerd
5 жыл бұрын
I think it’s a good deal for the price :)
@arialee4700
5 жыл бұрын
hi Jack, did you buy power feed already?
@joeygonzo
5 жыл бұрын
@@arialee4700 No. Still thinking.
@arialee4700
5 жыл бұрын
@@joeygonzo Jack, you can consider us, we are the factory supplying power feed in China, quality and competitive price. can I add you in whatsapp or skype?
@muhammadsohail1399
4 жыл бұрын
Howe mutch price
@anasmaknojia8119
4 жыл бұрын
Price
@chrishill6276
4 жыл бұрын
Im glad you used the correct word installation instead of that annoying American word instal
@TinkeringNerd
4 жыл бұрын
Glad you enjoyed it. Thanks for watching!
@muhammadsohail1399
4 жыл бұрын
I need this pice
@75Bird455
6 жыл бұрын
How does it perform while milling?
@TinkeringNerd
6 жыл бұрын
So far, I only ran it on light passes on aluminum. It works fine. Thanks for watching.
@75Bird455
6 жыл бұрын
Tinkering Nerd thanks for posting the video! I'll probably be picking one up soon.
@TinkeringNerd
6 жыл бұрын
Sure thing! Keep us posted of your progress as well :-)
@rakshithgowda7665
6 жыл бұрын
I understand that and I subscribed your channel
@TinkeringNerd
6 жыл бұрын
Much appreciated! 👍
@How2Wrench
3 жыл бұрын
Nice job. New fan/sub #how2wrench
@TinkeringNerd
3 жыл бұрын
Thank you so much!
@user-vt2yy9vb3g
3 жыл бұрын
Send pictures of the slide inside
@TinkeringNerd
3 жыл бұрын
Hello, which slide?
@user-vt2yy9vb3g
3 жыл бұрын
@@TinkeringNerd power slice
@user-vt2yy9vb3g
3 жыл бұрын
@@TinkeringNerd the link
@user-vt2yy9vb3g
3 жыл бұрын
@@TinkeringNerd +967 775801942 Digital Come and Watsab
@user-vt2yy9vb3g
3 жыл бұрын
@@TinkeringNerd 👋
@michaelthomas7898
5 жыл бұрын
Where did you get the power feed head at?
@TinkeringNerd
5 жыл бұрын
eBay, my friend, eBay :)
@muhammadsohail1399
4 жыл бұрын
Hi sir
@muhammadsohail1399
4 жыл бұрын
Please I need this pice please how much price and give Mobil no
@TinkeringNerd
4 жыл бұрын
Please search eBay for “mill power feed” to see most current prices.
Пікірлер: 108