You are actually making powder that is more powerful than factory ever cleaner,but the best part is that you're sharing your knowledge with us...thanks.
@Everythingblackpowder
Ай бұрын
You bet
@daveleigh4359
Ай бұрын
@@EverythingblackpowderHey would you be able to show us some finer details on your ball mill. I’ve been looking into ball mill efficiency and it seems complicated. I’d like to know the size of your drum, the volume of balls and the volume of powder. Also the speed at which you spin it. Eg, is your drum half full of balls? Quarter full?…. Thanks! Love your channel btw. You do great vids!
@m1a1abrams93
17 күн бұрын
@@daveleigh4359 Look in his past videos.
@Namenloser_
Ай бұрын
Jake WE NEED TO KNOW, COTTONELLE 72H!
@PBVader
Ай бұрын
That's an Ultra Comfortable idea.
@jimmysails994
Ай бұрын
@@PBVaderGood one. Lol
@detarak_oonson1119
Ай бұрын
Yes we need to know!
@chris993361
Ай бұрын
This!
@tbladesmith
Ай бұрын
Came here to say this
@miguelalmazanalhambra2958
Ай бұрын
Very interesting. The best channel on black powder DIY.
@Everythingblackpowder
Ай бұрын
@@miguelalmazanalhambra2958 thank you
@the_great_tigorian_channel
Ай бұрын
By far.
@_muody
Ай бұрын
I second that.
@scottsammons7747
Ай бұрын
Ditto
@A.R.American1
Ай бұрын
I bet he has forgotten more about making bp than most people will ever know
@taofledermaus
Ай бұрын
I would have thought sometime in history, some absent-minded BP maker would have forgotten to turn off his mill and discovered this earlier. Great results! I'm ready for it to get back down into the chilly 90's.
@Everythingblackpowder
Ай бұрын
They probably did.
@ARockRaider
Ай бұрын
Might have but wasn't doing any record keeping on how strong it was, so just thought "huh this batch feels like it has extra kick, wonder why" Where these guys know exactly how long they milled and exactly what they used for the carbon source and test every batch with that speed tester.
@twinengineer
Ай бұрын
Strange times where we are excited for 90° weather. Bring it on!
@markfair7648
Ай бұрын
Willard, great video. Mill time is one of the secrets. You would have to match your speed to the rifling to get the best accuracy. Once you have that, you have a tac driver. It was still a dead deer from what I saw😊. You guys put a lot of effort into this. Thank you
@Everythingblackpowder
Ай бұрын
Thank you
@lutherpayne9957
Ай бұрын
Perhaps this is why the 303 British BP round historically had better velocities. Or even the 45 Long Colt... The possibilities are endless. Great presentation!
@0neDoomedSpaceMarine
Ай бұрын
Aye, would love to see some more fiddling with blackpowder .303 after he tries Buckthorn and TP with extra long milling time. Maybe also some loads with a Dragoon or Walker clone.
@davefellhoelter1343
20 минут бұрын
303 was Nitrocellulose sticks. I tried to nitic spaghetti into nitroell sticks, "I Failed!" or stoped?
@kenwienken1396
Ай бұрын
I would like to see how the old standbys, Eastern Red Cedar and Willow would do when milled for 48 hours. Especially the willow.
@the_great_tigorian_channel
Ай бұрын
More milling makes sense, the more homogeneous the mix the better it will burn. I wonder if mill time also could impact the level of fouling at all. Great video as usual, keep up the great work!
@Everythingblackpowder
Ай бұрын
Thank you
@kyleheins
Ай бұрын
Yes, it will affect fouling some. Am more homogenous mixture will burn more consistently and completely, leading to more power, less velocity variation, and less unburnt material to foul the weapon. Powder moisture level is the other factor, which when too low prevents much of the fouling from leaving the barrel as it catches on the steel and other fouling, building up rapidly. It also has a minor "steam cleaning" effect in the right concentration, actively removing a portion of prior fouling to limit the rate of buildup to the point that good powder in a good weapon can be used for dozens, or even a few hundred shots before a swab becomes necessary to avoid problems. Ultimately, the only way to rediscover how all of this works IRL is the testing Jake and his guys are doing.
@vernonland5987
Ай бұрын
Mill it at 24 hour increments until you see no increase in velocity. Good videos!
@richarddean3154
Ай бұрын
I read the comments and noticed some declarations that this was the best black powder channel. Because I was late to the party, I can't second the sentiment but I wholeheartedly agree. Very impressive performance. Your team is comprised of some real thinkers and doers. I am watching the chronograph readout just waiting to see "2000" and we are rooting for you in Wisconsin! My treadmill is in the basement awaiting repurposing into a mill. I only have 5 lbs. of Schuetzen to get through first. Thank you for all the time you put into this.
@Everythingblackpowder
Ай бұрын
Thank you
@AirsoftEli2000
Ай бұрын
Need.the recipe!
@AirsoftEli2000
Ай бұрын
U say 77..13 ..10?😊
@Everythingblackpowder
Ай бұрын
@@AirsoftEli2000 77 parts kno3, 13 parts charcoal and 10 parts sulfur.
@davisk1234
Ай бұрын
This is the best and worst part of my Friday. Excellent, high quality, informative, no bs content only to be ruined by having to work and miss the premier every single time.
@Everythingblackpowder
Ай бұрын
Sorry you missed it
@davisk1234
Ай бұрын
@@Everythingblackpowder im the one sorry. watching it twice now to make up for the lost time
@the_great_tigorian_channel
Ай бұрын
@@davisk1234I feel you, I miss it every time too.
@AS40143
Ай бұрын
Potential ways to improve efficiency: 1. A slight decrease in the pyrolysis temperature with an increase in its duration in time 2. Displacing oxygen from the pyrolyzer using carbon dioxide (dry ice) or nitrogen before pyrolysis begins to prevent combustion. 3. Prevent air from entering the pyrolyzer during cooling by using a valve (needs thick walls) or nitrogen filling 4. Grinding the powder with a little water 5. increase pressing pressure
@nevisstkitts8264
Ай бұрын
Imo feed the tumbler with Argon from the weld cart..
@Namenloser_
Ай бұрын
Finally cottonell 72h milled powder.
@Everythingblackpowder
Ай бұрын
Nope
@Namenloser_
Ай бұрын
@@Everythingblackpowder 🤯
@nigelkavanagh2048
Ай бұрын
My favourite black powder artist, I look forward to this every week sir. Thank you.
@Everythingblackpowder
Ай бұрын
Thank you
@geargnasher9822
Ай бұрын
Humidity ABSOLUTELY MATTERS. We're having a humid summer and clumping after 8-10 hours of milling became intolerable with reclumping occurring within five minutes. My solution was to buy a 3-gallon vacuum chamber that I hook up to my AC vacuum pump and dry all my materials at once overnight at 29" of vacuum, then take out and quickly weigh each ingredient for a batch and put directly into the mill drum. If the ingredients are dried to this level and the milling drum is air tight, no clumping will occur.
@jeffersonsharp2292
Ай бұрын
Good info, thanks. I have been considering building a vacuum drum. Good to know I'm not necessarily way out in the weeds on that.
@geargnasher9822
Ай бұрын
@@jeffersonsharp2292 If you don't already have a vacuum pump, the jungle website sells complete vacuum chamber/pump kits for not much more than a pump alone costs if purchased separately. Get the tempered glass lid, not the acrylic. It's money well spent since you can dry your charcoal without fear of it catching on fire. Be sure and weigh your final mix AFTER drying. Pump it down until it holds a steady vacuum (may take a few minutes while the water vaporizes and creates gas volume), close the valves, turn off the pump and just let it sit for a while. Even a couple of hours makes a huge difference to the clumping.
@dirk73156
Ай бұрын
I could tell from the first shot that it was gonna be fast. The way it looked and sounded gave it away. Great job and video!
@brianr555
Ай бұрын
Down here in the deep south, the humidity is quite the beast. Yall are doing a fantastic job! I think your efforts have been very productive to say the least. I cant wait to see what you do in the next presentation. Thanks guys!
@luuk-out-below9804
Ай бұрын
Yeah one thing you can do is dry the nitrate down and mill it on its own in one tumbler for 24 hours while milling the charcoal and sulfur mixed in another tumbler. Then combine the tumblers for the next 24 hours. The nitrate is really the only ingredient that seems to problematically suck up water.
@Everythingblackpowder
Ай бұрын
Thank you
@recoilrob324
Ай бұрын
It kind of makes sense that carbon is carbon regardless of the source....only varying in how large the carbon grains might be. So milling more breaks up the larger grains to equal the smaller ones for equal performance. Obviously there will be a point in the milling where more doesn't increase the power ...very interesting experiments and thank you for doing them.
@Everythingblackpowder
Ай бұрын
Thank you
@_muody
Ай бұрын
Charcoal is not really pure carbon, but rather carbohydrate. That's might also be the reason why black powder made with purer carbon, like lampblack or graphite, usually sucks.
@0neDoomedSpaceMarine
Ай бұрын
@@_muody Carbohydrates? Does that mean that muskets will make me gain weight? Lampblack isn't pure carbon though, it's a petroleum product.
@kyleheins
Ай бұрын
Charcoal contains traces of water and silicate, as well as one other I can't recall, when made correctly. The moisture level determines cleanliness in part, while the burn temp is the other half (determined more by the kno3 than the charcoal). The power level is improved primarily by grain formation and consistency along with the sulfer-kno3 ratio. However, the chemical impurities (silicate and the like) can reduce burn rate, temp and consistency as well, if not purified enough. Purification is in the kiln (pyrolisizer) so the kiln time is a balance between burning off just enough moisture and not leaving too many other impurities. This is where wood source makes the biggest difference historically. Some woods make a purer charcoal at ideal moisture levels, others must be dried out more to be sufficiently purified (for power and consistency purposes), making them a bit dirtier than their more ideal couterparts. Mill time maximizes the powder efficiency, burn rate and consistency within chemical limitations, meaning most charcoal should have similar maximum performance, with variable cleanliness at that level. Most should be usably clean, with a few being impossible to sufficiently purify without breaking the carbon down into truely pure carbon, which is too hard to react with other chemicals for the purposes of black powder and will have so little moisture that it becomes functionally useless.
@_muody
Ай бұрын
@@0neDoomedSpaceMarine I don't know how digestible is it, maybe could work as a fiber ;-) And what I meant is the closer you get to using actual pure carbon, the worse the resulting black powder is, at least so it seems.
@carlericvonkleistiii2188
Ай бұрын
You produce the best powder making and testing videos around! This is excellent technical experimentation. And you are having fun!
@Everythingblackpowder
Ай бұрын
Thank you
@robmarchion6708
Ай бұрын
I'm really glad you didn't give up on cottonwood 😊. Living up here in the high desert prairie of Noth central Montana we have plenty of cottonwood and poplar trees! Enjoying all your videos keep doing what you're doing!
@AS40143
Ай бұрын
The best DIY BP channel ever
@Everythingblackpowder
Ай бұрын
Thank you
@Curtislow2
Ай бұрын
Definitely my favorite black powder channel. Plus we get Jake as a bonus.
@Everythingblackpowder
Ай бұрын
Ah I bet you say that to all the black powder channels. 😉
@Curtislow2
Ай бұрын
@@Everythingblackpowder 🤭
@HoffmanReproductions
Ай бұрын
Amazing work guys! Can’t wait to see what happens with the Buckthorn using your new methods.
@Everythingblackpowder
Ай бұрын
Thanks Ben, we are working on that
@Horus2Osiris
Ай бұрын
Wow. That was an excellent demonstration! Thank you for sharing, your knowledge took our 4th of July cannon to the penultimate level!
@Everythingblackpowder
Ай бұрын
Thank you very much!
@louisianagray8618
Ай бұрын
Will Jake I can't thank you enough for all this black powder development you have been working on thoroughly enjoy your videos
@Everythingblackpowder
Ай бұрын
Thanks
@jackmrozinski337
Ай бұрын
Thank you. I have been making bp for about 5 years. Your videos have made my powder better. Thank you.
@Everythingblackpowder
Ай бұрын
Glad to hear it. Thank you
@christiandore7518
Ай бұрын
Just from what I can tell from watching your others it looks like that stuff fires off really quick, no hesitation at all.
@charlesfritz7327
Ай бұрын
Now this is the science I came looking for
@chasebh89
Ай бұрын
id like to see the difference between milled and unmilled under a microscope the background characters always give me a giggle "water powered!.... wow!" lmao
@richardsims1805
Ай бұрын
Congratulations on a successful formulation of powder that is the equivalent of Swiss. Excellent videos! Accuracy is good too.
@Everythingblackpowder
Ай бұрын
@@richardsims1805 thank you. I’m sure the accuracy is better than that one test shows.
@ericc3327
Ай бұрын
Been waiting for this one, super happy to see the results! I expect most charcoals will be pretty equivalent in potential for velocities once optimal mill times have been determined for a given substance. At that point it’s a matter of selecting for price/availability, cleanliness, and convenience (least milling time). Incredibly useful information you guys are providing, thanks!
@Everythingblackpowder
Ай бұрын
Thank you
@shug831
Ай бұрын
If milling makes it better, then mill Swiss for an extra 24 hours to see if it gives the magic 2,000 FPS!
@saltydawgsailing
Ай бұрын
I second this. Give swiss another 24 hours or even 48 just to see what it does.
@wowlodarczyk
Ай бұрын
the idea is to replace Swiss, actually :)
@0neDoomedSpaceMarine
Ай бұрын
@@wowlodarczyk It'd still be interesting to learn what you'd get.
@shug831
Ай бұрын
@@wowlodarczyk yes, but if the secret of the power is in the milling time and "Swiss," is the benchmark of high quality BP, then by milling it you will know if it is the best or it can be improved upon.
@luuk-out-below9804
Ай бұрын
Yep the more you mix and grind the better it gets. When I was into BP rocket engines we would tumble it for 24 hours, pack a sample of 6 motors and test. If no CATO add 8 hours and repeat till there was a CATO, then back off the time 8 hours.
@BRENDANTHERED
Ай бұрын
What is CATO.
@luuk-out-below9804
Ай бұрын
@@BRENDANTHERED In rockets, CATO is the acronym for Catastrophe At Take Off.
@BRENDANTHERED
Ай бұрын
@luuk-out-below9804 Thanks for replying, I had thought to look it up myself but figured it might be nice for others who are wondering the same.
@luuk-out-below9804
Ай бұрын
@@BRENDANTHERED no problem.
@edwinpharaoh6658
Ай бұрын
I wondered what Cato was too, thanks for answering
@wyatesbob
Ай бұрын
Wow that's fast. Love to see that in a 45 colt.
@cedhome7945
Ай бұрын
Got to use someone else's powder this weekend at Tewkesbury medieval festival...in a cannon, and it doesn't seem to matter what size powder we used (except big blasting pea size lumps fly burning out to 30yards and could hit the troops on the opposite side). still fascinating to watch you progress and unlock the secrets of powder making 👍🇬🇧🇺🇲
@hiltonian_1260
Ай бұрын
The difficulty with getting a good group could have been the heat and it could have been that the more powerful powder took you out of frequency for that barrel. Faster isn’t always better for accuracy. Every rifle has its happy load.
@gimpyoldhunter
Ай бұрын
I actually mill mine for 48 plus and since I started using Cottonelle I always make it with dextrin because I live on the east coast and I hunt in the south so I am pretty much always having issues with humidity. I have a kiln/oven that I use for my charcoal. It’s a heat treat oven that I use when knife making so I keep that process pretty consistent.
@meguy798
Ай бұрын
Ceramic materials engineer here, and I just want to say that your videos are awesome, and I can tell you really know your stuff. It makes a lot of sense that milling performance would improve performance since smaller particles with higher specific surface areas can greatly improve reaction kinetics. Increases in time, changing media size and optimization of mill efficiency as you've discussed previously (BTW you were basically dead on the money on how to get a good ball mill run) are all key tools in my industry to make a process that provides the best possible end product.
@Everythingblackpowder
Ай бұрын
Thank you very much
@JustMe-im8ch
Ай бұрын
Ive been dreaming about finding such an excellent channel on black powder. You guys are the best.
@theliquorpriest
Ай бұрын
Howdy, first off - hugely appreciative of what y’all do, thank you Jake & Jake’s brother! Have y’all considered doing a 48hr AND a 72hr batch of cottenelle and alder buckthorn? I am very curious to see where the diminished returns kick in with mill time. Perhaps even run a 96hr batch? Seems like y’all have unlocked a fundamental technique lost to time and buried by ignorance that is absolutely essential to the performance of bp. Huge respect boys!
@grosnain
Ай бұрын
hell yeah ! Now i just need to be equipped with a pyrolyser, a mill and a press.
@luuk-out-below9804
Ай бұрын
Well there is 'primo' and there is works good enough. For accurate consistent target shooting and hunting use primo like Jakes or swiss or even goex. For other stuff like plinking, cannons or fireworks you can cut some corners imo. The paint can is a fine charcoal maker and you can do a workable damp press with a bottle jack and a heavy object like a pickup truck or just push it through a screen (moistened ball with iso propyl) if you don't need the hard granules. You do need some kind of mill though.🙂
@luisgarza2036
Ай бұрын
Maybe the denser the charcoal the longer the milling time to achieve better and faster deflagration, comparing to internal combustion engines, the most homogeneus the air/fuel mixture the cleaner the combustion, More milling time Of BP makes more homogeneus mix promoting a faster and more complete reaction between ingredients, as always really good info and the best BP/muzzleloading channel on YT!!!
@Everythingblackpowder
Ай бұрын
Thank you
@jeffersonsharp2292
Ай бұрын
Your channel has taken me from, "If you want the best black powder, you have to buy the expensive commercial stuff." To "If you want the best black powder you have to roll your own." I still haven't made any black powder, but if/when I do, your experimental results will inform my setup tremendously. Thank you.
@Everythingblackpowder
Ай бұрын
Thank you
@KathrynLiz1
Ай бұрын
Another great video... One can only conclude that the differences from one charcoal to the next is its ability to be milled finely enough to consolidate well with the other ingredients. If that is indeed so, with enough milling most charcoals will make really good fast powder. Worth knowing..... If in doubt, mill the bejesus out of it!
@Everythingblackpowder
Ай бұрын
Well said
@BUCKEYEFARMBOY54
Ай бұрын
Well I want to thank you, Jake. You are a WEALTH of great information!!😀 I’m pretty proud of myself! I measured out 24.5 grams of 4F goex, dampened it and picked it with a small 20 Ton press and a Rosineer Die…….pumped the jack till it stopped, as you directed and 10:58 ended up with a puck 30MM diameter 19.75 MM long, which by my calculations should be @ 1.76 Grams/CC. As 4F, 50 grains weighed 48.2 grains…….I will check again after I grind the puck. Thank you again for sharing your knowledge with us all!!
@lightweight1974
Ай бұрын
Lol, I just had a mental image of your next test putting lead balls in low earth orbit....and NASA sending someone out to 'talk' to you. You've discovered something very important and are sharing it with the world. Impressive!
@Everythingblackpowder
Ай бұрын
Thank you
@bobborlog1677
Ай бұрын
You could tell by the zip and recoil the of the 1st shot before the chronograph reading that it had the goods
@edbetsworth2772
Ай бұрын
Oh heck yeah! Another video on making powder! 👏🏻👏🏻👏🏻
@bobbytaylor5559
Ай бұрын
I've been under the weather the past couple of days, and what a wonderful time to discover your channel! I've been watching all day long, and it's helps to keep my mind off of how shitty I feel, lol... Loads of fascinating information here. Thank you for doing what you do!
@Everythingblackpowder
Ай бұрын
Glad to hear it. Hope you feel better soon
@rickgaston7118
Ай бұрын
Fast and ignition ! Am impressed
@knight0334
Ай бұрын
Looking forward to the future 48hr mills versus older 24hr comparisons.
@peterparsons7141
29 күн бұрын
Thanks for sharing your projects. Interesting and informative, and always fun.
@stevenquick4315
Ай бұрын
I’m impressed. You are having a great time and making us all smarter doing it. Thank you! I need to put a press together.
@Everythingblackpowder
Ай бұрын
Thank you
@35southkiwi16
Ай бұрын
Good work and thanks for sharing your knowledge. Much appreciated.
@seantierney3
Ай бұрын
to make this finding scientific make a batch of charcoal from a source that has been very consistent. take a sample out after milling for 24 hours to act as a control and then every 12 hours after that until all is used. that way you can chart the difference between mill time and see if the improvement is linear, exponential, or has diminishing returns. the idiot in me wants to see what a batch of balsa milled for 168 hours will do. great video
@meanman6992
Ай бұрын
You men are doing wonderful things for us black powder fellows.
@Everythingblackpowder
Ай бұрын
Thank you
@raywatson1186
18 күн бұрын
In Volume 1 of Bill Ofca's Technique in Fire, he states that "small particle size is important to good chemical reaction. The smaller the particle size, the greater the specific area, hence the most complete and fastest reaction."
@patriot7703
Ай бұрын
Your videos keep getting better all the time! I can't wait to see the 48 hour Cottonelle!
@scotty3114
Ай бұрын
Jake, I enjoy watching your channel each week. I think this is an awesome breakthrough. There will come a time when this knowledge will save lives.
@richbattaglia5350
Ай бұрын
I’ve brought this up before, but I think it would greatly benefit you. Your ability to improve the potential of black powder performance is unique and legendary. No corporate entity, just some can-do American attitude akin to a southern Tony Stark of primitive firearms. I think you could turn a profit selling your own blackpowder online and highlight the making of it via your channel. Many supporters would buy it just by its familiarity let alone witnessing the process of exactly how their purchase was made. Just my two cents. Great video as always!
@MKultrapdx
Ай бұрын
That opens a whole new can of worms. The laws around selling BP are interesting.
@richbattaglia5350
Ай бұрын
And who are you supposed to be?
@richbattaglia5350
Ай бұрын
Nothing.
@luuk-out-below9804
Ай бұрын
@@richbattaglia5350 I think MK is just bringing up the point when you go from making it for yourself as a hobby there are virtually no regulations. When you go to selling it aka commercial there are loads of regulations and permits. Kind of like making your own barely pop or liquor.
@richbattaglia5350
Ай бұрын
The point is valid. My contention is who this is coming from. Is this person sincere? I’ve seen otherwise with many others, so you will forgive me if I have doubt.
@wickdghost3639
Ай бұрын
Offer still stands, I'll send you all the basswood you would need so you can try it out as a charcoal source 👍💪
@dlh1947us
Ай бұрын
I will never make bp but I love watching you guys. Thank you🤠🤠🤠🤠🤠🤠🤠🤠🤠🤠
@Everythingblackpowder
Ай бұрын
Thank you
@michaeldaltonsr8954
Ай бұрын
Wow!! First time I spotted vid on "roll yer own"! LOTSA "EXPERTS" can throw chrono numbers/"groupings"/ trajectory charts/"twist rates"/ etc, YET, few, if any, addreses the fact that accuracy begins even before one loads any firearm. So, if you don't have the proper "push", nothing else in the chain of events matter. I have always found the "whys" much more interesting than "dumping" a thousand rounds, so TY for your vid.
@jorgenkarlsson9725
Ай бұрын
WOW !! I just love you guys you are the best there is on the tube.
@Everythingblackpowder
Ай бұрын
Thank you
@GLG-20DECOY
Ай бұрын
“Don’t worry boss, it could happen to anybody.” Am I the only one that caught the Captain Ron quote ? Lol
@Everythingblackpowder
Ай бұрын
Yes! So far you’re the only one. Well done!
@olskool3967
Ай бұрын
Jake thank you and your brother so much for your willingness to share your hard work and knowledge you are acquiring in this field. again, thank you so much,,,,,,,,,,,,,,,,,,,
@Everythingblackpowder
Ай бұрын
@@olskool3967 you bet
@chuckaddison5134
Ай бұрын
Another very interesting turn of events!
@Johnny-jr2lq
Ай бұрын
Great content I’m getting closer to being able to get on this train. And I cannot wait to start
@Everythingblackpowder
Ай бұрын
Glad to hear that
@howardb.728
Ай бұрын
Hey Jake, thanks again for such a thorough presentation - you are a priceless resource for us plebs :) cheers
@Everythingblackpowder
Ай бұрын
You bet
@sbjohnson31
Ай бұрын
This is such awesome information! Thanks for all your work and sharing this. Would love to see more on mill times with other carbon sources as well as trying to find the sweet spot on mill time. I Was also wondering if different sources have different mill time sweet spots.
@GianmarioScotti
Ай бұрын
I would suggest to try to take into consideration changes in relative humidity of the air during milling. I would be very surprised if air humidity didn't have a hyge impact on black powder performance.
@danliberty734
Ай бұрын
I would suggest using unbleached tp to reduce the yellow-green residue in the barrel after firing.
@Riyame
Ай бұрын
Love this channel and all the info. It is just unfortunate that making BP is stupidly illegal in Canada
@HardwayRanch
Ай бұрын
I love your videos. I have a BP rifle and revolver, and my son has a revolver, but we only shoot them perhaps once a year at the most, however, I still find your videos amazing!
@user-ik6rz8nt9e
Ай бұрын
Great show it's appreciated.now i know what my batch is going to be .. fantastic.
@vaquerojoel2026
Ай бұрын
It would be very interesting to see how cottonwood does at 72 hours of mill time. Also how the good carbon sources do with 48 and 72 hours of milling. Thanks for helping out the community with all of your experimentation.
@micwell2247
Ай бұрын
Longer times milling makes a way better mix more finely mix...who knew ...gonna try it too...rock on
@exothermal.sprocket
Ай бұрын
Fantastic discovery. Funny how this sort of thing opens up more possibility. Which leads us to suspect, the best of the bunch (Cottonelle or buckthorn) might be significantly improved. I guess we'll be finding out! It's my guess that the burn uniformity has improved a lot with the increased milling. The particles of powder are probably more like shore rock along Lake Superior after a thousand years of swashing back and forth and grinding itself smooth.
@Cr0wmagnum
Ай бұрын
Yes we want to see. An additional 200fps is just crazy! What a difference a day can make. Im looking forward to 48 hour TP.
@davefellhoelter1343
25 минут бұрын
"My Brother!" was as fun as yours! I'm still Working! On it. Love your Channel! Thank you Sr! I would take that pattern stonning any time. May? need better for squirrels?
@wreckcreationandenginenuity
Ай бұрын
I'm not surprised that mill time makes a difference, but I would have thought that after 24 hours it would be as finely mixed as it could be. When I get around to trying this I'm going to try the brass hexagon pieces and see if that helps any. Keep on experimenting. Thanks
@Everythingblackpowder
Ай бұрын
Do you know where I can find those brass hexagons? I would like to buy some
@wreckcreationandenginenuity
Ай бұрын
@@Everythingblackpowder I am just going to cut some off bar stock drops.
@wreckcreationandenginenuity
Ай бұрын
Also I've been wondering if time of year the wood is harvested would make any kind of difference. Being in Ohio we have sap runs for maple syrup in the spring but know from heating with wood for the first twenty years of my life that wood cut during winter didn't have to dry as long because the sap was already out of it. But if wood was harvested in spring, the sap has a lot of sugars and I'm sure other stuff in it. Just a thought. I'll let you know when I get some drops of hex cut and see if I have enough for two. About how much do you think you will need
@StevenMMan
Ай бұрын
For my 2 cents the point deminitioning returns issue is a thought to pursue. Cotton wood at 60 hrs than 72 just for the science. It is interesting for sure the effects of mill time. Mountain man
@AndyTheCornbread
Ай бұрын
Great video and I am looking forward to seeing what the extended mill time does to the alderbuckthorn and the cottonell, both should make for very interesting videos to me or as a single video if you choose to do both in one video.
@skyeshore5704
Ай бұрын
Have you already tracked and generated an ambient temperature graph for some of your favorite powders? You might learn temperature stability influencing your data to some effect. Hotter temps makes powder burn faster. Love this channel! Thanks for sharing!
@kirkboswell2575
Ай бұрын
You have just outlined the next series of tests!!! 😊👍 Eagerly awaiting your next video!!!
@Sport--willow
Ай бұрын
Yep... Now I'm impressed! Damn fine job!
@Everythingblackpowder
Ай бұрын
Thank you
@blackriflex39
Ай бұрын
cut the sidewalls out of old tires to hang your steel with last way way longer .. it does deaden the sound but dissipates the energy better
@willowpine2604
Ай бұрын
Did you know that in dry milling method you get size like 15 microns top ? On the other hand wet milling you get nano particles ! Guess which powder gonna be the winner!😊😊 An excellent solvent is pure alcohol or isopropyl alcohol the potassium nitrate is almost not soluble with it and when it's dry it leaves nothing behind because of the purity (99.9% isopropyl alcohol) of course there are some issues with this process first your ball mill must be waterproof the other issue is that isopropyl alcohol is a bit expensive so you can let it dry and take the product! Also is a flammable liquid and you must be protect it from the Bruss motors of your mill! Imagine if the microns is so fast what the heck the nanoparticles can do 😉 try it with alder buckthorn in 72 hours and post it here !👌👌
@Everythingblackpowder
Ай бұрын
Funny you should mention that. We are experimenting with wet milling right now in an effort to reduce the mill time. We are using denatured alcohol.
@willowpine2604
Ай бұрын
@@Everythingblackpowder i tried that way long ago, but i don't tell you the results, i want to have your fun and happiness of discover it yourself! But i can give you some tips about the process if you want!
@willowpine2604
Ай бұрын
@@Everythingblackpowder so you can make perfect results, otherwise you will pass this legendary method by saying "it was just a wasting time "
@luuk-out-below9804
Ай бұрын
@@willowpine2604 Spill the beans man, we are all scientist here!
@willowpine2604
Ай бұрын
@@luuk-out-below9804 wait my friend, Willard is a guy that we know and have a face to show, as for you (no offence)how do i know you are trolling fishing around for info to make something bad? Your Chanel is locked 🤔 so the beans will stay in the basket for now...
@Alex_556
Ай бұрын
Thanks for promising results! Now would be interesting to see Cottonelle powder milled for 72 hours since that toilet paper is probably the easiest to get and the most consistent source of charcoal for DIY makers..
@pigroper5
Ай бұрын
You probably know this, but some powders are very temperature sensitive. The hotter it is outside, the higher the pressure and velocity. Shooting during summer months vs winter months may affect the results a bit. At least that's a thing with some smokeless powders. I doubt that would result in a 200 fps difference, but 50 fps is probably very possible.
@sandroventania782
Ай бұрын
Perhaps this is why light woods like balsa give better results. Light wood is more fragile, so it grinds more easily, simulating a longer milling time. A dense wood charcoal can produce good BP if milled for a long time.
@kevin-pk6hd
Ай бұрын
Fantastic results, i think revisiting the worst carbon source and testing at 72hrs would be a great data point.
@_muody
Ай бұрын
Another great video by a true scientist. Great series, most comprehensive on the topic.
@duybear4023
Ай бұрын
Where's the diminishing return? 72, 96, 120 hours? I'm curious how far we can take this concept.
@RustyJoe
Ай бұрын
Once again you’re data is dope AF! I’m definitely curious to see how milling time improves less than ideal carbon sources. 👍🏻
@jimv.661
Ай бұрын
As I stated a year ago, I stop mine and shake the canister until it breaks up, then continue on for a 1 1/2 - 2 days.
@JOSHUA-zy6cu
Ай бұрын
Great video Jake, it would absolutely be worth trying alder buckthorn and cottonwood milled for 72 hours. the results could be even more surprising
@pursaveer9027
Ай бұрын
Informative as usual! I make BP for pyro by milling the heck out of the charcoal by itself and screen-mixing it with milled sulfur and nitrate. Pressed to 1.75, it beats Goex by a bit. I mill the charcoal with small stainless steel media like 5/16". It would be cool to see what result you guys would get doing something similar.
@curly__3
Ай бұрын
Have you ever done a proper CIA method with no milling, just properly pre grinding the charcoal and disolving everything in water with alcohol at the end and then compressed and grinded it? If so, what was the outcome? Thanks for all these vids. Definitely one of my favorite channels, you are the paul harrel of blackpowder in case you don't know that.
@rnssr71
Ай бұрын
he has older videos on the 'CIA' method. doesn't use that method anymore. kzitem.info/news/bejne/1m2j2XmckIqVhIo and kzitem.info/news/bejne/pIp-36Sjmp-reZw
@markjones2859
Ай бұрын
Lmao. I should have waited till the end, since you already thought of it. Can't wait to see the next one. Great work 👍
Пікірлер: 570