Thanks for watching! Stay tuned for the next video on Friday, February 18th at 10AM Eastern where I'll be tackling the lathe. See you then!
@seanasaurusrex88
2 жыл бұрын
Love the videos you've uploaded! Thanks for sharing
@tonyking9235
2 жыл бұрын
START AS YOU MEAN TO GO ON . GOOD PLANE NICE YOUR BRINGING YOUR GRAND DADS MACHINES BACK TO LIFE .
@ronwhittaker6317
Жыл бұрын
some would say awhh shut up let him get over it, well they don't know then, sorry bubby about your grandpa i never got over mine I'm not sure you're supposed to. mine has been gone a long time and invariably i find myself in need of him. idk know if them being taken suddenly is worse or watching them wind down like on an old mantel clock is just as bad you never really get over it it just doesn't hurt as bad the longer you go. you can't let go altogether because they built what makes you, you. do your best and live your life because it won't be long now somebody that loves you will be where you stand. dont just be an asset to others be a blessing.
@paulpfeifferjr6054
3 ай бұрын
Geeking out or not-power feed on the ram-with, what? 3 different selectable feed rates-AND auto feed release. I really miss my old Bridgeport ! ! Geek on proudly !
@smoulderingdog
2 жыл бұрын
While this video started out sounded like it was just going to show how to clean a machine, i simply have not encountered a better description of all the components of a large milling machine, as well as a great description of it's setup and operation. Job done.
@InheritanceMachining
2 жыл бұрын
Thank you! That's really encouraging to hear. I hope to keep learning about these machines and techniques and share them along the way
@fuhrermk92
Ай бұрын
@@InheritanceMachininghello dear 🌹 i am a new subscriber.. did you figure out why this mill has 2 motors??
@rpederse
Жыл бұрын
I don’t know anything about video production, but from the first episode this series seems so polished and professional.
@johngrace199
2 жыл бұрын
Your grandfather must have been quite the hobbyist to have that quality of machinery. So glad for you and your family that it could be saved and 'brought' back to life.
@InheritanceMachining
2 жыл бұрын
He did have a habit of buying in excess of what he technically needed. He definitely always planed for the future.
@link7417
Жыл бұрын
@@InheritanceMachining Seems like that kinda scrupped on to you a bit after seeing some of the projects you have done so far and kinda over killed it whit precision and size to make sure you are ready for what ever is thrown at ya :3
@mauserkk98
2 жыл бұрын
Nice to see your looking after those machines for another generation of use, your grandfather would be proud I'm sure . Looking forward to more episodes.
@InheritanceMachining
2 жыл бұрын
I like to think he would be. Thanks for following along!
@TheMadManPlace
Жыл бұрын
All this equipment looks BRAND NEW.... And ALL THAT CLEANING and what is the FIRST THING YOU DO? Make it dirty all over again... The sign of a born machinist...
@BarnStangz
Жыл бұрын
My 13 year old son turned me on to your channel and I'm slowly watching your videos. It brings a tear to my eye thinking about the relationship my son has with my father. I'm sure it was pretty much like your relationship that you had with your grandfather. My old man has the same sort of stuff, just on a bit smaller of scale and one day we'll inherit it since he is getting older. Both myself and son like to fabricate and it's wonderful to be able to learn from channels like yours. I hope that the content you put out gets more kids excited to create something with their hands and maybe put down the video games and social media. Looking forward to not only watching more of your content, but sharing these videos with my father, who will also enjoy the care and love you have for these machines that have been a part of your family.
@davidstolkacevs871
Жыл бұрын
I'm 16 and I shed a few tears when I watched the first video on this channel. I can't wait to start machining stuff.
@JFulmer4
8 ай бұрын
I didn't have as much appreciation for my father's or grandfather's tools until they were gone, and now they're the most precious and cared for things I own. This video is great, and I really feel the emotion and care you put into the machines and the video. Great job!
@daves8407
2 жыл бұрын
The care you are giving ro your grandfather's tooling is incredible. It shows just how much you cherished the time you had with him. Keep up the great work
@InheritanceMachining
2 жыл бұрын
I really did. He's a huge part of who I am today. Thanks for the support
@daves8407
2 жыл бұрын
@@InheritanceMachining I had a very similar relationship with my grandfather. I inherited a bunch of hand tools from him as well as the knowledge of how how to fix just about anything. I would trade anything for just 5 more minutes with him
@dalelindberg7784
2 жыл бұрын
Ill bet your grandfather is looking down proud! Nice inheritance looks your grandfather was quite clever ,enjoy and keep him smiling .I'm abit jealous ill keep watching Dale.
@InheritanceMachining
2 жыл бұрын
Thanks, Dale! I like to think he would approve of what I'm doing. He was a very clever man!
@davidwilliams1383
2 жыл бұрын
I am sorry about the loss of your grandfather. On the other hand, I am very glad you inherited all of this equipment and are able to keep it all together and have the desire to get it back in proper condition and to "make chips". So many of the small shops go to auction and get split up or worse yet, scrapped. Thank you for sharing. Love listening and watching as I work in my own mini shop.
@InheritanceMachining
2 жыл бұрын
Thank you. I consider myself lucky yo have been able to spend as much time as I did with him.
@EpiphonicResonance
2 жыл бұрын
Quiet, confident and competent. Finally a YT machinist that I can relax and enjoy. 👍
@InheritanceMachining
2 жыл бұрын
Wow, thanks!
@davidbiser7231
2 жыл бұрын
What an inheritance. That's awesome that someone in your family that appreciates them now has them.
@InheritanceMachining
2 жыл бұрын
Thanks! I was ready to do whatever it took to keep these in the family!
@erikisberg3886
2 жыл бұрын
Never seen a dual head bridgeport type mill like this. I can se why it would be really useful for keeping one head trammed and one head adjustable for prototype work. Nice machine, looks it is in in really great shape once the superficial rust is removed. I do not have a bridgeport type mill, miss it sometimes for its flexibility.
@InheritanceMachining
2 жыл бұрын
I have yet to see or hear of anyone else having seen a dual head like this. Must be pretty rare. And much like all the other machines, very lightly used.
@dakotagaughan4699
Жыл бұрын
@@InheritanceMachining looks like possibly a shaper. Some manual mills came with them most places add them on for basic, simple, operations where you don’t need a dedicated shaper. Like, for example, you needed to mill a key way or make a small gear set
@berend213
Жыл бұрын
The channel "hand tool rescue" has a bridgeport with a swivel head like this one and his has a shaper mounted on that end. This one is a bit more substantial but i'm guessing it is also a shaper.
@bethsheartsandgiraffes3619
2 жыл бұрын
Welllllll..... HOW DID I NOT KNOW THAT PAIGE'S BRANDON HAS HIS OWN KZitem CHANNEL UNTIL TODAY AFTER I WATCHED HER EMOTIONAL CHAT VIDEO... UGHH.... BUT AM I EXCITED TO BINGE WATCH SOOO MANY EPISODES!!!!!!!! I know nothing or never been interested in metal stuff working stuff but since I love Paige and her favorite human here I am learning something new YAY!!!!
@InheritanceMachining
2 жыл бұрын
It’s somewhat new so I’ll forgive you 😉 welcome!
@captainbeefheart8866
2 жыл бұрын
This is already shaping up to become a great machining channel! Looking forward to future videos :)
@InheritanceMachining
2 жыл бұрын
Thank you so much! Definitely more to come!
@jesseskellington9427
7 ай бұрын
Big thanks for making this how to detail a milling machine video and other shop equipment. I landed in an very old machine shop with the new and old hard working production equipment. If it's not broken don't fix it. Some of these machines you couldn't get to the quality for the price with newer machines. They have been truly neglected. Unlike your grandfather's equipment. These videos are helping me restore. My new shop to all its former glory.
@aeolia80
2 жыл бұрын
I came over from your wife's channel, especially when I heard you were doing machinist work on this channel. My grandfather was a machinist, worked during WWII making bomb casings and then started his own business making mufflers for model airplanes (that actually flew), he eventually got a BS in engineering at 64 years old. The business has been gone for some time now, but my brother ended up in the same field after growing up in our family machine shop, and now my brother works making parts for tractors. It's so cool to see all these familiar machines again. My husband went to engineering school too, but in France, where he didn't study practical engineering, just theoretical physics, hahhaha, he can barely put together an Ikea piece (while I can do it without the manual, lol)
@InheritanceMachining
2 жыл бұрын
Welcome! That’s awesome you have (and know about) you machining lineage. And apparently learned quite a bit. I can attest to engineering degrees being mostly theoretical. Mine was as well. If it weren’t for my grandfather I may have been in the same boat
@jesseskellington9427
7 ай бұрын
Can we get the link to your wife's channel? :-)
@7027A
2 жыл бұрын
Very Zen state of mind in the shop with the machines. Satisfying to bring them back to life and ready to create perfection.
@InheritanceMachining
2 жыл бұрын
Absolutely! No distractions. Just picking away at it one step at a time
@lilllamaboi
2 жыл бұрын
“Grime with always find a WAY” lol nice
@InheritanceMachining
2 жыл бұрын
Finally someone caught that! haha
@KyleBrightman
Жыл бұрын
0:52 Seeing your grandfather’s LOTO picture is just perfect. Just discovered your channel and I’m working my way from the beginning to see all the beautiful stories I’ve missed. Thanks
@InheritanceMachining
Жыл бұрын
He's keeping an eye on my making sure I don't do anything stupid 😁 Thanks for following along!
@justinmaynard890
2 жыл бұрын
A nice subtle “this old tony” subscribe pitch. Love it
@InheritanceMachining
2 жыл бұрын
My nod to one of the greats 😁
@justinmaynard890
2 жыл бұрын
@@InheritanceMachining yes y’all are in the greats. FYI. My grandfather was a machinist for ford as well. In Alabama. I’d love to talk. Can we?
@justinmaynard890
2 жыл бұрын
I machine parts as well. Yet I’m in medical sales. I have all the machines. I think we’re similar. I have a KZitem channel. Jacked up labs. And repurposed kings. Let’s talk some how.
@courierdog1941
2 жыл бұрын
A full machine shop that was a hobby machine shop.Wow the find of multiple life times you are very blessed.
@richardspengel3281
Жыл бұрын
Great video. I think the average viewer would not have gotten any feel for just how difficult and fussy it is to tram a knee mill. Once it is done, you REALLY think about it a few times before tilting the head. Perhaps that is why this machine has two heads-- one to tilt and one to leave the heck alone!
@lilianvallon9376
2 жыл бұрын
as many there i'm new to the channel. I'm a machinist and like what i see here. One little DRO detail. As you said it read the position straight forward. And true as well the backlash of the wheel as something to do with it own scale. But the play come from the screw it self, it depends on witch side of the thread your contacting and the play is gape in your pitch. so yes your DRO is going to tell you where you at but it will not avoid the play. It means that if you'r setting on the way out of your cutting way, your tool can move back during the cut witch will cause precision issue. Not realy an often problem, but good to know if one day your looking at an unknown situation. Waiting for the next video!
@InheritanceMachining
2 жыл бұрын
That’s a very good point! I have a habit from the past of always approaching my target position from the same direction to help with this issue. So if Im off the part and overshoot I’ll back up and re-approach. If the table does float during the cut it will show on the DRO. But not much you could do mid-cut. I didn’t get into too much detail in this video but would probably be worth a dedicated video on its own. Thanks for the feedback and support!
@tylerhensley2312
2 жыл бұрын
That dual head ram is something else. Thank you for sharing!
@InheritanceMachining
2 жыл бұрын
Apparently it’s not all that common. But some people have pointed out some advantages. Thanks for watching!
@tylerhensley2312
2 жыл бұрын
@@InheritanceMachining subbed my friend, keep it up!
@edreusser4741
2 жыл бұрын
Am I weird because watching you maintain that incredably gorgeous piece of machinery gave me a woody?
@tcarney57
2 жыл бұрын
It's not weird at all, but it is weird to say so in public.
@merkyworks
Жыл бұрын
"Subscribe" on the oil bottle was a nice touch
@andrewterry8092
2 жыл бұрын
I just found your channel, you are making some interesting videos! I've been watching Abom79 for six years and lately he is either on vacation or doing nothing interesting, so I am happy to find a new machine tool channel. Keep up the good work, you'll have 100k subs in no time.
@InheritanceMachining
2 жыл бұрын
Thank you! I'm only a more recent follower of Adam but I can understand his situation. That guy puts out a lot of content. Thanks again for the support and welcome!
@bobsmith4185
Жыл бұрын
Aboom 79 was my 1st KZitem channel I subscribed too.. I feel the same way you do.. he hasn't done much for a few years now.. plus to much talking
@kristianruvelynzarene8958
Жыл бұрын
Everytime i watch your video i've learn alot from you. I wish i watched your video on year 2003 where i start learing being a machinist..
@haroldsegur9524
2 жыл бұрын
Yes think a while longer and you will be amazed at the versatility you will be capable of,a good tip is something I learned from a wise machinist,make yourself a removable longer handle for your ram,bigger radius on the arc means finer movement ,rube Goldberg it.that short handle is out of the way but doesn't give much leverage.
@InheritanceMachining
2 жыл бұрын
That's a great idea. The original lever actually had 2 handles and one was broken off at some point. Probably from how tight it is. Could kill 2 birds with one stone.
@courierdog1941
2 жыл бұрын
I had to go back to the very beginning, and starting over so I do not miss any part of your VLOG.
@hammersprojectshop2124
10 ай бұрын
Just getting into your series. Love it as i have inherited s bunch of tooling. No machines though. You were talking about your oarts washer. I modified mine with a pump from a dishwasher. And 110 volt water heater. Now instead of the solvent I just run purple power or some other degrees or with hot water. Saves a ton of money and is way less caustic
@makerspace533
2 жыл бұрын
Nice machine. It's a personal preference, but you may want to adjust the quill return spring to balance the quill. So it will stay where you put it. If you are boring a hole using the power feed, the last thing you would want is the quill retracting while the spindle is running, making a spiral scratch in the beautifully finished bore.
@InheritanceMachining
2 жыл бұрын
Funny you mention that as I was doing some boring just this week and discovered that exact issue. I've started snugging the quick lock just slightly the prevent this, which also probably helps a little with quill rigidity
@courierdog1941
2 жыл бұрын
Please do not get me wrong, your conventional method works well and you did an excellent job. The Spindle Square is much faster and every bit as accurate and leaves more time to make chips. It even works well on my table top machines which are more finicky to align as they do not have proper adjustments like your beautiful machines.
@InheritanceMachining
2 жыл бұрын
I’m sure it is! But believe it or not, I don’t have one
@johncollins719
2 жыл бұрын
"Grime will always find a way." Ain't that the truth......
@micmike
Жыл бұрын
First, your grandad loved you alot, he entrusted you with some of his prized possessions. Second, you loved your Grandad alot, you accepted and looked after those precious gifts. Third, thanks for sharing!
@InheritanceMachining
Жыл бұрын
Thank you and thanks for watching!
@brucepottorff6870
2 жыл бұрын
Looks like a promising channel. Photography, lighting, and voiceover are spot on and I look forward to more!
@InheritanceMachining
2 жыл бұрын
Much appreciated!
@jeffdeluca1153
2 жыл бұрын
So amazing to have your Grandpa's shop! I have only Dad's tool chest, his hammer and a small block plane and I sit somedays and just hold them and remember. Sentimental Ole fool I guess but enjoy your shop! And memories!
@InheritanceMachining
2 жыл бұрын
Not foolish at all. It's important to remember the stories and people behind these objects. Thanks for following along
@JayRussellDuramax
2 жыл бұрын
This was cool to watch! Our 3-axis CNC mill is just a desktop model, so I've had to pull everything apart and do all of the adjustments on it. It was incredibly satisfying to do! Also, I think the dual-head setup will allow you to have one of them perfectly trammed to the table, and then have the second one at an angle so you can mill something square and then flip the turret around and cut an obscure angle into it without having to change your setup - like the 15 degree angle you cut into your surface gauge baseplate. That was the first video of yours that I watched.
@InheritanceMachining
2 жыл бұрын
That was basically the same conclusion I came to as well. I don't know that i would do it for one or 2 cuts but if i had a batch of parts it would save a lot of time.
@David-hm9ic
8 ай бұрын
Your videos are always first class. That is a very nice mill and the condition is incredible. It appears to be a rebadged Wells-Index 745. It's not a Bridgeport nor a Bridgeport clone. It's much better than that. Wells-Index is still in business and parts are still available.
@trueblack6760
Жыл бұрын
I can't go back to my work... I'm keep on watching your video. I love how you do care about the precision of the machinery setup.
@InheritanceMachining
Жыл бұрын
😂 Thank you! I couldn't do it any other way
@michaelrobinson9643
Жыл бұрын
Nice move with the cling wrap and rust converter. At the micromechanical level it's a good move over scrubbing and as you worked out - it saves you time and your body!
@ancilla2075
Жыл бұрын
the second head is a shaper head for cutting keyways and other tasks, its not a common thing to see anymore so you dont see machines with them very often, but if you have one it is a nice feature to have you dont have to break down the setup and move to another machine.
@TRHoldorable
2 жыл бұрын
bold words, saying a perfectly square block without breaking out the surface plate.... great video!
@InheritanceMachining
2 жыл бұрын
I tend to use that term loosely haha Thanks!
@sambow4u
2 ай бұрын
I Made a Very good living on a 5hp. Bridgeport ! But I'd jus as soon run a Enco ! I will tell ya though , if you'll buy a cheapo , put it in the well of the machine , little bit of tubing and fill it with coolant ! You'll be amazed at the Better finish you can obtain, and the amount of Time you'll increase, before they need Sharpened !
@deedeeindustrialsuperprecision
2 жыл бұрын
That is a nice mill, heavy with box ways. Enco sold some nice machines.
@InheritanceMachining
2 жыл бұрын
It was made in China but is as nice as any other mill I've used, which isn't many, but still!
@trevorjarvis3050
2 жыл бұрын
I miss Enco and their tools… their yearly catalog I received as an adult was like the Sears or Penny’s catalog we got at Christmas when I was a kid. Gawd I’m old! 😁
@InheritanceMachining
2 жыл бұрын
@@trevorjarvis3050 Ha! That's cool! I used to do the same thing when we got the yearly MSC "Big Book"!
@Halflife2036
Жыл бұрын
Learned so much still early in my career In machining and this video makes me want to grow in the industry hope you keep posting 10/10
@InheritanceMachining
Жыл бұрын
Thanks! I certainly plan to. Happy machining!
@jdsteffen7048
2 жыл бұрын
Really appreciate your videos... thoughtful and well produced. I hope that you enjoy making them as much as we enjoy watching them.
@InheritanceMachining
2 жыл бұрын
Thanks! Overall I do enjoy this a lot. Glad you like them!
@polotecnic7816
2 жыл бұрын
only started watching you today, what a great channel start. well filmed, good content and you talk!! the big men in you tube machining have all gone a bit off recently, so a new face is appreciated. good luck for the future.
@InheritanceMachining
2 жыл бұрын
Thank you! I’m honestly humbled by how many people are liking videos. I hope to keep putting this level of effort into them!
@andrewterry8092
2 жыл бұрын
Haha, yes, you also noticed that the big men in you tube machining (i.e. Abom79 I presume is one) have definitely gone off the rails in the last six months. He just made two 40 minute videos about simply leveling the lathe, while repeatedly displaying CRC cans and raving about anti-seize (yes, you are sponsored, we get it). Adam has made great videos but his success has gone to his head. This is a great opportunity for a new channel such as this one, I like it.
@thegamingender6933
Жыл бұрын
Although this is 9 months later, I've actually used a 3-axis manual mill for several projects before. It was an iconic bridgeport mill, with an AcuRite Millpwr G2 CNC, but it was rarely used as a CNC controller, more as a digital readout. For me, milling feels calming, yet there's that minor twist of anxiety, that you get distracted for one moment, and BAM! machine not happy, and you now have a range of new issues, ranging from damaged bits to your transmission being no longer functional. I broke a 3/4" 3-flue HSS endmill once, thank god it was only the endmill.
@richardjohnson1764
Жыл бұрын
The most impressive thing about the quill is that the return spring still works. This might be the only used mill I’ve ever seen with a working return spring.
@sallybrokaw6124
2 жыл бұрын
Great video! You explained everything very clearly. Dual head mill.... If they had one a shop mounted the cherry head on the back. My oldest son who has some career center machinning experience loves your videos also. Al B in very cold and froze Ohio!
@InheritanceMachining
2 жыл бұрын
Thank you both for watching! We're very cold and frozen in Kentucky as well!
@mister_carrot8428
2 жыл бұрын
Came across this channel the other day and been really enjoying the videos. Looking forward to seeing you get the shop fully up and running!
@InheritanceMachining
2 жыл бұрын
That's awesome! Thanks so much for watching!
@saschaoswald480
2 жыл бұрын
Really nice machine! Definitely hasn't seen production use, or there would be no paint left on the rim of the base of the column where the operator puts their foot while cranking handwheels.... Dual heads, so cool! I don't know what for but I want it!
@InheritanceMachining
2 жыл бұрын
Thanks! More important than the paint not being worn away is that the ways are practically brand new!
@HelenaOfDetroit
2 жыл бұрын
The two heads are so you can set it up for production use. As in, you do one operation with say, an end mill. Then you can spin the other head in place and use a fly cutter to give a good surface finish. Remove the finished part, put on a new one, swing the end mill back, and away ya go.
@mitchellcollins7370
2 жыл бұрын
I’ve been machining for 9 years. You know a lot!
@InheritanceMachining
2 жыл бұрын
Much appreciated! Though if you are referring to my knowing the names of all the parts... I had to look that up myself. Haha
@Bob_Adkins
2 жыл бұрын
Binging! Love it! A cheap little dehumidifier can put a stop to the rust. When I got mine, I knew it would help, but didn't realize it would totally shut down the rust. Running a constant year-around temperature somewhere around 65-75F also works. My dehumidifier only turns on when the air conditioning doesn't cut on for a few hours. Grinding is rough on filters though!
@InheritanceMachining
2 жыл бұрын
thanks! I have one running non-stop and I agree. no more rust! You'll catch that in my tour video ;)
@Bob_Adkins
2 жыл бұрын
@@InheritanceMachining Oops, sorry. I'm still binging, watching 1 video per day. I'll get there!
@Coopedupintheshop
2 жыл бұрын
my thought of the second head is that rare occasion you need just a smidge more rigidity you can use the rear head. well I think it would be better to always use the rear one and only use the tilt and nod head when that feature is needed. super cool machine I'm glad you are taking good care of it
@InheritanceMachining
2 жыл бұрын
Oh! That's something I hand't considered, but you are right. I need to swing that one around and see how square it is with the table. I've never actually seen that head used so the spindle bearings are probably pristine. Thanks for the suggestion!
@johnttillman
Жыл бұрын
@@InheritanceMachining what model is that milling machine, I've never seen a model with dual heads at each end of the turret
@InheritanceMachining
Жыл бұрын
@@johnttillman it’s an Enco 100-1599. Yeah so far no one has seen this before either. A few ideas on the reasoning though
@DudleyToolwright
2 жыл бұрын
Nicely narrated and shot. Well done.
@InheritanceMachining
2 жыл бұрын
Thank you!
@remoman
8 ай бұрын
If you are referencing most of your work of the bed of the vice on parallels you should tram you head to that (the bed of the vice). As an experiment, now you've trammed the head to the table, take an indicator and do a few sweeps of the vice bed and see how parallel (or not) it is to the table.
@wiliame
Жыл бұрын
thanks for a nice video. oh btw the double heads is for toolshops/shop-places/mechanics places that have more then one employee working... back in the days before factories... was good to have two powerfull drills and save space, plus you never want to place a drill in a corner so one i middle of workshop for example, that you can use both ends was seen as smart. we didnt have that at my school growing up, but i recall the shop-class-teacher saying he was whishing for one ;) all students had to stand in line for drilling holes, and since half class was spent cueing for either the bandsaw or the drill press... welll..... understandable XD
@alitn588
7 ай бұрын
For Cleaning the oil use diesel it's very handy and safe. We always use it 👍
@charliemyres5450
Жыл бұрын
What a superb machine! Your grandad certainly had an eye for buying quality.
@Urfavpreppster
2 жыл бұрын
I like this video that with slow and calm audio which very enjoyable.
@InheritanceMachining
2 жыл бұрын
Thank you!
@jonathanolsen7254
2 жыл бұрын
Your Grandfather had very good taste. After a while they all become part of your family, You get to know when something is not just not running wright . Take care of them and they will out live you times 2. Love this video.
@InheritanceMachining
2 жыл бұрын
I already consider them family! Just have to remember all the quirks and whatnot from when I used to use them regularly. All in due time. Thanks!
@msheaver
Жыл бұрын
Many thanks for taking the time and effort to explain the details of the [parts of the system!!!
@latemnf
2 жыл бұрын
Give this a try for tramming the mill, bring the knee up close to the spindle face, loosen all the adjustment bolts and use the quill lever to extend down until you're making solid contact spindle face to table, you can feel when it's there, lock the quill down then tighten the adjustment bolts.
@InheritanceMachining
2 жыл бұрын
Interesting! how close are you able to get with that technique?
@latemnf
2 жыл бұрын
As long as the face of the spindle has no burrs and you use a good flat spot on the table you can get it within .001" or better quickly and easily. I love your channel by the way, was just binge watching your videos :) amazingly well done.
@InheritanceMachining
2 жыл бұрын
@@latemnf good to know! If nothing else it would get it close enough to to indicate with a tenths indicator. Thanks!
@TangentJim
2 жыл бұрын
Brandon -- Good Stuff, I'm impressed with your approach and articulation -- you're not a novice. You now have another subscriber. Two Thumbs up.
@InheritanceMachining
2 жыл бұрын
Thank you very much! Welcome!
@apdj94
7 ай бұрын
I just had to do my shop certifications for the lathe and mill for my design class and we had to watch 3 and a half hours of 60 year old footage of a man who *kinda sort of* knew what he was talking about. It would have been far more useful to just watch this and be done with it. I kind of wish you did full on tutorials for the mill and lathe, I think they would be incredibly helpful.
@natewarner359
Жыл бұрын
Not only am I enjoying I am learning Thanks
@incubatork
Жыл бұрын
I'm the same colour as the Emco, green with envy, inheritance could not have been better even if you selected the items yourself, I'm part way through the cleaning videos and will watch them all. Also subscribed. Looking forward to what hand tools are in the boxes too. Thanks for sharing.
@marvinpybus4599
2 жыл бұрын
The bottom die on an old punch press is about eight inches in diameter and ground perfectly flat. If you can find one in good shape it makes tramming in your mill head much easier.
@InheritanceMachining
2 жыл бұрын
that's good to know. i've heard of people using brake rotors as well, though they would need to be ground
@paulmartinez9908
Жыл бұрын
I’m addicted to your channel..so glad I found it
@campbellmorrison8540
2 жыл бұрын
I love you have a fire in the shop. How lovely during winter
@InheritanceMachining
2 жыл бұрын
It gets pretty cozy in there :)
@r3n5h0r3
Жыл бұрын
Truly top quality content. I just found your channel and am watching all of your videos in order. When I say you're my new favorite KZitem channel, know that I mean you've beat the other ~450 channels I'm subscribed to. You're doing a very good job. Props to you and your wife.
@InheritanceMachining
Жыл бұрын
Wow... Thank you so much! Welcome!
@haroldsegur9524
2 жыл бұрын
Been there,I inherited a tree 2uvrc from my gpa.it has some interesting features such as a built in the quill quick change z collet system,a micrometer on the ram,it has all the features of the style you have including variable speed head by dial.mine also has boxed y axis ways will enable some heavy cuts for you.I have seen two head mills,multiple setups is the name of the game for you,multi operation.we both got lucky by getting good heavy duty machines.
@InheritanceMachining
2 жыл бұрын
Very nice. Thinking about that now, the box ways would be way more rigid than the dovetail ways. Especially considering the cutting feed is typically in the x. I've had the thought that I might be able to set the second head up with a standalone CNC table in on the back of the mill. 2 machines for the price of one!
@haroldsegur9524
2 жыл бұрын
Yeah,good idea,it also is good for simple operations such as reaming,drilling to speed up accurate machine with other head.reaming is another set up.as long as ram stays put front to back you can just rotate turret for same table.
@InheritanceMachining
2 жыл бұрын
Are you saying to swap the heads while running the same part? I would think you would have to re-find your part origin anytime you move the turret around. Unless I'm misunderstanding you?
@haroldsegur9524
2 жыл бұрын
@@InheritanceMachining yes a recheck would be in order,the turret rotates on a positive centerpost, would have to plan the job out,but the center post is a machined surface with a vertical and horizontal plane so any movement would be minimal front to back.as long as your right to left is aligned you are off to the races.
@haroldsegur9524
2 жыл бұрын
Your machine has a regular Bridgeport rack n pinion ram adjustment so rotation of turret is a bit more difficult to adjust front to back with great accuracy.,mine has a .001 increment dial and leadscrew,just as your xny axis.it is butter smooth.i only have 1 head,obviously.
@scratch_440
Жыл бұрын
Its amazing. Ive seen all of the videos on this channel except this one and it just dawned on me that i just pick up an almost identical mill (mine only has one head) and i just learned so much about it. The auto stop on the quill feed is a sweet surprise for sure! Thank you so much for continuously putting out great content. The soft spoken narration and music make it easy to watch and my guilty pleasure is definitely the drafting. Also watching you overcomplicate things is motivation for me because I have no experience in machining (lathe/mill) so i am learning from your channel. Keep up the great work it is very inspiring.
@lolcec81
Жыл бұрын
Комментарий в поддержку канала и ролика, а также труда мастера.
@high-techredneck220
2 жыл бұрын
First thing I would of done if I had inherited a shop is sell all the shit in my apartment bc I'd move into the shop, I'd most likely spend more time there anyway building absolute greatness
@InheritanceMachining
2 жыл бұрын
If I was single this would 100% be me
@David-lb4te
2 жыл бұрын
11:02 The backlash needs to be loaded to take the load during a cut. The handle needs to take the backlash regardless of the dial reading.
@InheritanceMachining
2 жыл бұрын
Absolutely. There's a lot of explanation to this point so I did not include it in the video.
@gregeconomeier1476
2 жыл бұрын
I would suggest a few gallons of EvapoRust and a large container to deal with the surface rust on the various bits and pieces.
@noobFab
Жыл бұрын
Another fabulous video - I'm digging through your 'back catalog'. Loved (what I believe to be) the ToT reference with the subscribe lube bottle!!
@InheritanceMachining
Жыл бұрын
Thank you! ToT was a big inspiration for me 😁
@estebanfranco5246
Жыл бұрын
Felicidades sr el tener sus máquinas en óptimas condiciones y compartir sus conocimientos Saludos desde México
@michaelrice500
2 жыл бұрын
If I had a mill that nice, I wouldn't have any friends.
@InheritanceMachining
2 жыл бұрын
Well I don't, so I'm living proof.
@michaelrice500
2 жыл бұрын
@@InheritanceMachining 😎
@joeblochlinger
2 жыл бұрын
My man...if you keep this up and continue producing videos of this quality I'm almost certain you're channel will blow up! I'm super jealous of these machines and I'm sure your grandfather is happy to think his machines will have another life. Keep it up👍👍👍
@InheritanceMachining
2 жыл бұрын
I really appreciate that! Thank you!
@violettownmicroenterprises1528
Жыл бұрын
yep, Im impressed...
@jimellis1496
2 жыл бұрын
I just found your channel and have been binge watching the episodes. I am looking forward to watching you restore these machines and making chips.
@InheritanceMachining
2 жыл бұрын
Welcome aboard! Plenty more to come!
@AttilaAsztalos
Жыл бұрын
Now you'll definitely have to do the same with the lathe - that is, make a perfectly square block on it once you clean it up. Which, as we well know, is something lathes can TOTALLY actually do (with the right chuck)... ;)
@dirttdude
2 жыл бұрын
That is a dope AF mill, buddy
@InheritanceMachining
2 жыл бұрын
It’s awesome!
@sblack48
Жыл бұрын
Richard King, who teaches the famous way scraping classes, says that you should adjust the gibs so that you have 3-5 10ths if I recall correctly. Of course it depends where you measure it, but that gives you an idea. He also said NEVER clean ways with compressed air. It pushes chips into the ways. He rebuilt machines with his Dad for decades. He would rebuild the same machines in the same factories for years and knows what works and what doesn’t
@InheritanceMachining
Жыл бұрын
That's great info. Thank you!
@sblack48
Жыл бұрын
@@InheritanceMachining also, if you are having trouble finding a gib setting where the feed screw is easy to turn but there is no play then it is most probably because the ways are no longer parallel because of wear. They usually get worn in one place, say near near the middle where your vise is mounted, and not out by the ends. If that is the case the ways need to be scraped or you live with it. There are lots of videos in youtube that show how that is done, but it is an involved process that requires some specific equipment. At least measuring the wear is straight forward and would tell you where you are. Incidentally, that 1/2 thou clearance in the ways is required to give space for oil. There should never be direct metal to metal contact. If you do get contact the ways get gauled and basically destroyed.
@sblack48
Жыл бұрын
Ps if you have the opportunity to take Richard’s class I can’t recommend it highly enough. It isn’t cheap, but you are buying into 40 yrs of his own experience and also whatever knowledge his Dad passed on to him throughout his 30-40 yrs in the trade. They worked in the rust belt in its heyday so they rebuilt everything big and small.
@TAWPTool
2 жыл бұрын
I love your videos and can’t encourage you enough to keep going! Great style and editing. Thanks for sharing!
@InheritanceMachining
2 жыл бұрын
You can bet we will! Thanks again for the support!
@Gabriel_lfm
9 ай бұрын
Your Intro music is so addictive 😂
@markkrantz1516
2 жыл бұрын
What a fantastic story line, your delivery and style are great. Looking forward to seeing your projects. I am the grandpa trying to teach
@InheritanceMachining
2 жыл бұрын
That's great you have people to teach. I wish I had more time with my grandfather to learn. Thanks for the support!
@TheProfesionalGamerGGN
2 жыл бұрын
Great work bro....let's make some chips 😃
@daner.d
Жыл бұрын
looks like your patience paid off cause some of the parts I've seen you produce are very impressive. maybe you and "this old tony" can collaborate and come up with something cool, you both seem to have a similar filming style. would be neat to see what you guys could produce
@jasonhull5712
Жыл бұрын
Love it ! What a beautiful mill ! So clean and nice looking. Looks like it was just painted yesterday.
@nicbeed8749
2 жыл бұрын
I have watched machining on other channels (non specific machining channels) and since I stumbled onto your channel I have become a huge fan. It helps that I enjoy your video styles a lot. Keep up the good works looking forward to more uploads into the future
@InheritanceMachining
2 жыл бұрын
Be careful, before you know it you may be filling your garage with machine tools 😁 thanks, man!
@gregoryh4601
Жыл бұрын
Sir. Your Grandpa must have been one great Machinist and I am happy you are taking over for Grandpa. Did grandpa come from overseas? My Grandpa had a lot of Civil War Guns but someone took them before my Dad got back to Grandpa Home. Sir did you find Out why Two Motor Heads? Could be different size Motors. Love you Site. Peace Be With You and Family. Greg
@InheritanceMachining
Жыл бұрын
Thank you. No he was born in Cincinnati and lived there most of his life. Though a good place to be for machine tool industry. See my other reply about the second mill head.
Пікірлер: 408