yes i love these diy videos where we watch you in real time doing your troubleshooting process making mistakes and correcting them and giving us your thoughts. its the perfect recipe for learning from others.
@TheBrokenLife
10 ай бұрын
Thanks a lot! Those are the kind I like to make, so it works out well for both of us. 😅
@tomfromtacomas7249
4 ай бұрын
Thanks for the great entertainment. I know your pain on doing projects.
@TheBrokenLife
4 ай бұрын
Thanks for watching! 👍
@garygullikson6349
11 ай бұрын
My old HF inflator had a crack/leak in rubber hose to lock on chuck. Couldn't find a replacement hose with dual straight type chuck. Ordered Spurtar Inflator Gauge Tool from Amazon, has quick connect to compressor hose ( no long rubber hose). Has dual straight type non-locking chuck. I flounder around with fittings and adapters, metric vs standard threads, and allen wrenches, etc. Hope Spurtar spurts properly with no leaks.
@TheBrokenLife
11 ай бұрын
I once had one of those HFT inflators and I was never happy with it. That's why I went with something name brand, and a good bit better quality, when I went this way. Prices on them have gone insane in the years since I bought mine though. I'm not sure I'd do it again in today's money. 😅
@mikem5475
2 жыл бұрын
I have never seen a better struggle. Very entertaining
@TheBrokenLife
2 жыл бұрын
Thanks!
@tarstarkusz
3 жыл бұрын
The only way you ever get success is to try new things. Most of the time, it doesn't work out. No big deal. Money spent, lesson learned.
@TheBrokenLife
3 жыл бұрын
Indeed. In the long run, it's all going to work out fine. That thing will probably serve me for the rest of my days and I already don't remember the time or money I wasted chasing after it.
@Papaws_Garage
2 жыл бұрын
Don't throw away the ends you cut off,cut the ferrule off and reuse the fitting instead of buying more barbed fittings or adapters
@TheBrokenLife
2 жыл бұрын
I can't remember what I did, but I think it ended up where I used everything..?
@chucklynch8397
3 жыл бұрын
This is an interesting project and it shows what a pain it is to work with air connections. But, when you ordered the original Milton inflator, did you know that it was also available ion 3' and 6' lengths?
@TheBrokenLife
3 жыл бұрын
I did, but at the time this one was actually less expensive than the shorter options and I knew I wanted a hose whip on the other side of it anyhow. So... I thought I was a hose barb or two and a couple of clamps away from where I wanted to go. I was clearly mistaken! What really put the nail in the coffin was the decision to abandon the original Milton air chuck after discovering the fitting wasn't NPT. I probably should have just adapted those threads to NPT, but I didn't (and don't) actually know what they are and I didn't want to buy $50 of fittings trying to figure it out. I thought at the end of it I'd still be able to use the Milton chuck on its own so it was worth the effort to have it around too. Another mistake... This was all just dumb from start to finish, but I couldn't see it until I was in it too deep to do anything about it. It made for an entertaining video at least, I think...
@alans.4658
8 ай бұрын
Typically Milton uses UNF threads for the air output side of the inflator
@TheBrokenLife
8 ай бұрын
That very well may be the case. 👍
@brucebeaver6929
3 жыл бұрын
Watched, Shook my head, Laughed. I was wondering why you didn't just cut the 10 ft. hose and spliced it in at a shorter length in the beginning
@TheBrokenLife
3 жыл бұрын
You took all of the appropriate actions! Edit: That was the original plan, but the "unique" fittings on each end messed that up since I couldn't use the longer air chuck, and then each step I took further down that path just made it worse. I should have just sent it back, but the time for that was 25 months ago. Oh well... The end result ended up being (IMHO) a fairly entertaining video and a tool that pretty much does what I wanted... Just way more money and effort than it was worth.
@tarstarkusz
3 жыл бұрын
5:25 I prefer you keep the stuff that didn't quite work out in the video. Let's people see what snags you are likely to hit when you go into what seems like a simple fix/upgrade.
@TheBrokenLife
3 жыл бұрын
Funny enough, I recorded that part of the video maybe one or two days before you made a comment to me that you like seeing my thought process through this stuff... It was as if you were watching over my shoulder. Are you..? haha
@kennya1425
2 жыл бұрын
Why do you like the hose whip in the inflator?
@TheBrokenLife
2 жыл бұрын
So I can read the gauge more easily than if it were down at the valve stem. It could also be helpful for inflating dual tires.
@kennya1425
2 жыл бұрын
@@TheBrokenLife I mean the swivel whip extension at the inflator handle.
@TheBrokenLife
2 жыл бұрын
@@kennya1425 So it's self contained and so it's physically larger so I'm less likely to lose it. I misplace air chucks constantly so I try to put them all on whips so I don't.
Пікірлер: 24