I have owned this tool for 5 years and it is fantastic it has never let me down i have used it for so many projects including driving deck screws and lag bolts and it still keeps going
@mediumgrey8674
2 жыл бұрын
Does it have an electronic clutch?
@robk1310
3 жыл бұрын
Milwaukee for DIY is NOT overkill. Buying crap for DIY is stupid. You did good.
@justauser
2 жыл бұрын
Agreed. Buying crap is always more expensive.
@joshisennagle7272
Жыл бұрын
There's nothing more annoying than having to hand-screw something together kzitem.infoUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn except for the pain in your wrist that is. This addition to my tool kit is great and I can get a lot done without all the pain and annoyance. The battery last's a long time and I have yet to run out of power when doing a small project (granted I am saying small project because I'm no construction worker). The only thing that I wish it had was an LED or pair of LEDs to indicate when it was charging and whether or not the charge was complete (or full).
@jordang5079
4 жыл бұрын
Umm ok. Why hasn’t this channel got like 50k subs... such a professional in depth review, exactly what I was looking for and I was shocked at the likes and subs... deserves so much more
@WesleyDropDead
3 жыл бұрын
Still true!
@scottelia8723
3 жыл бұрын
🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
@jimmyjamessac7171
10 ай бұрын
He threw the instructions
@XxbrandonxX234
3 жыл бұрын
People are asking why this instead of just using a drill with the clutch setting. Well most drill are still more powerful at the lower setting. Especially for AIRCRAFT PANELS!. this tool is perfect for the aviation industry
@rtgray7
2 жыл бұрын
People are obstinate and cheap bro! If they get one of these, they'll swear by it...
@deeshnutsh
2 жыл бұрын
@@rtgray7 I fucken love my m12 screw driver, I have the m18 fuel combo and I my screw driver is my favorite, perfect for car panel removals.
@Mir_Azad
5 ай бұрын
@@deeshnutsh just why not? its smaller, lighter, and even faster because you wont deal with destroying screws
@mynamesjeff347
Жыл бұрын
I do hvac and I feel like this would be practical opening closing ac cabinets doing everyday service / installs
@liam.yurr357
3 жыл бұрын
I have the non fuel screwdriver but i love it its an awesome combo and im an electrician
@jamesclark5082
3 жыл бұрын
I have had this for years this is the most widely used tool I can't imagine life without it the clutch is so useful
@jimmyjamessac7171
10 ай бұрын
SIR James. Much respect to you from northern California
@jimmyjamessac7171
10 ай бұрын
Can we be homies
@IppiopaidFEEDBACK
3 жыл бұрын
I really like this screwdriver because of the mechanical clutch! The new ones have E’Clutch (electronic clutch) and I just don’t feel they’re accurate.
@motov8-garage832
3 жыл бұрын
It's nice for its purpose, but I already have the m12 fuel 1/4 impact that has the 4 settings on it and on setting 1 is great for little screws and smaller precise jobs. Plus the other settings will get you up to what an 18volt impact will do👍.. I cant see spending the extra money on this for me..that said if the first version kit of this screw driver is in the store again for 50$ like around this last Thanksgiving with the two 1.5 amp batterys charger and bag...I'd get that one just cause..its a deal at that price.
@dumdiversaspapalbull1452
3 жыл бұрын
Was it a “fuel” tool?
@motov8-garage832
3 жыл бұрын
@@dumdiversaspapalbull1452 yes it was. Now that fuel screwdriver kit is back to 99$ pretty sure.
@rtgray7
2 жыл бұрын
It still isn't as low torque and as small as the screw driver. Don't be stubborn and cheap, buy one and you'll use it. Got mine in the kit with charger and 2 batteries for $69.00 a few weeks ago.
@motov8-garage832
2 жыл бұрын
@@rtgray7 Your absolutely right, I'll get one eventually. I can see how they can be very useful for low torque applications. I am cheap😄 lol, But when I do buy somthing its usually pretty expensive. So I've got to cut cost where i can when i can..
@danlux4954
2 жыл бұрын
I’ll stick it in my electrical kit. Impact is in the case with the hammer drill/driver.
@scottelia8723
3 жыл бұрын
Thank you for such an honest review bro!! Getting into the fuel line soon!
@COR0NAD0
3 жыл бұрын
Thank you for commenting and consider subscribing and giving me a thumbs up!
@Ziiio
8 ай бұрын
Hello, can you tell if your one is wobble (runout) when newly purchased?
@Aladinscave
Жыл бұрын
My question is how good is it on delicate stuff ? I need something that can also go very easy on small screws with a soft setting on the clutch and good trigger control? All the videos I’ve seen so far is going on on how powerful it is witch is actually besides the point of this gun ?? If I want a powerful gun I’ll get the M18 impact driver because it’s made for it …..🤨
@COR0NAD0
Жыл бұрын
Yes, I think it will do what you need to do for sure. But in the end I ended up going with the Dewalt Xtreme screwdriver. Because I needed something to be delicate, where I can control the torque. Dewalt extreme screwdriver fit the bill. Thanks for commenting, consider subscribing and l consider leaving me a thumbs up.
@thereloadingcraft
Жыл бұрын
@coronado does this have a mechanical or an electric style clutch? Thanks!
@cardo1111
3 жыл бұрын
Good review, smart move covering serial numbers on the web 👍🏽
@TheChico868
Жыл бұрын
Wish they updated it. Make it shorter more powerful. I went with the Gen 3 hammer drill driver instead.
@cesarsouza5883
3 жыл бұрын
Does this drill make that impact noise ?? Or no because the only reason i want to get this is because sometimes i work in a costumer house and they dont like the noise that my surge does
@COR0NAD0
3 жыл бұрын
No, it does not make the same noise as the impact drill or the surge. However, it does make a lower clicking noise when it’s met the limit of the setting that you have it dialed into. Thanks for commenting and consider giving me a thumbs up and subscribing!
@justa1098
Жыл бұрын
Is it variable speed?
@COR0NAD0
Жыл бұрын
Yes, it does have a clutch setting at the very top. You can move it from 1 to 2, depending on what you’re working on. Thanks for commenting consider giving me a thumbs up and subscribing.
@justa1098
Жыл бұрын
@CORONADO76 thanks for replying so quick! So variable speed in both settings?
@4dchessplayer516
4 жыл бұрын
I get why this exists but can you just feather the impacts or set the speed on it and do the same job as this will? I mean if i were to get a fuel screw driver i would get the installation one for the angles.
@DamionJR4923
3 жыл бұрын
Impact doesn’t have different clutch settings. The installation driver has the forward reverse switch on the top of the tool. I prefer the normal switch on this tool. I have the 1 speed brushed version but wonder if this is worth the upgrade.
@victormeldroo
3 жыл бұрын
no mate, to be honest no tool or method replaces what this one can do and do so well. to everyone asking why not just use, etc etc etc, you would need to use this one to answer all your Q'S it's an all in one tool drills, screws, 2 speed, adjustable clutch, compact and more.
@macyeeterson1782
2 жыл бұрын
Dude you don’t know the clutch settings from the speed settings
@endroo93
2 жыл бұрын
How's this different from the M12 BD?
@COR0NAD0
2 жыл бұрын
Thanks for commenting. The biggest difference is one is fuel the other is not, which is a signature of the new lineup. Also the fuel has more torque. Consider giving me a thumbs up and subscribing.
@lancesmith8025
Жыл бұрын
Just order one fuel are the future
@Lanterns_light
3 жыл бұрын
This was an unboxing. Not a review. You can’t review something if you haven’t used it.
@COR0NAD0
3 жыл бұрын
That’s great, thanks for pointing out the difference. I appreciate it, consider given me a thumbs up and subscribing.
@reactionsok
Жыл бұрын
He didn’t say it was a review
@jimmyjamessac7171
10 ай бұрын
Shots fired
@jimmyjamessac7171
10 ай бұрын
This dude will squeeze your head until ooze comes out your eyes
@charlesviner1565
3 жыл бұрын
New subscriber!.thanks for the video
@MustPassTruck
3 жыл бұрын
Is this tool made obsolete with the installation driver now?
@fredothechimp
3 жыл бұрын
Different uses imo. This is better for precise work than the install driver. That said you could probably get the brushed version of this for that, what I have.
@DamionJR4923
3 жыл бұрын
I don’t like the forward reverse switch on the installation driver. It is on the top of the tool.
@danlux4954
2 жыл бұрын
Nah, different tool.
@yorselrus1996
2 жыл бұрын
Did not know this thing existed, thought they only had a brushed version
@COR0NAD0
2 жыл бұрын
Yes, this was one of my favorite tools but I ultimately ended up taking it back and got the Dewalt Xtreme drill. You’ll be very happy with the Milwaukee! Thank you for commenting consider giving me a thumbs up and subscribing!
@canoeshoe
3 жыл бұрын
why would you need this as opposed to a drill or impact driver
@COR0NAD0
3 жыл бұрын
This has an adjustable clutch that goes from very minimal torque to high torque. It allows you to put screws in without risk to damaging the material you’re working with. It’s a over glorified screwdriver that easier to control. Thanks for the comment.
@austin8826
3 жыл бұрын
You need something with low torque precision for interior work. Dash and trim screws are fragile compared to bolts
@ChunkyMonkaayyy
3 жыл бұрын
Lighter, smaller, quieter than an impact, and has a clutch.
@justauser
2 жыл бұрын
I don't own a regular drill because I have drill bits and spade bits that have a hex end. So to me this is my drill, but it's also what I use for driving screws with the clutch settings, and I even drive larger fasteners instead of picking up my impact. It kinda does everything!
@abesebag1085
Жыл бұрын
awesome
@vinnyavalanche
Жыл бұрын
This is the one I really wanted I got the brushed version....it's really good though I'll probably still buy this and keep the brushed version for in the house stuff
@dumdiversaspapalbull1452
3 жыл бұрын
Surge kit on sale at The Home Dumpot. Tool, 2 m12 batteries, charger, and 👀 like zip up 💼 for $179.
@COR0NAD0
3 жыл бұрын
Sounds like one heck of a deal and you can’t go wrong with Milwaukee m12! lineup. Consider giving me a thumbs up, subscribing and thanks for commenting.
@dumdiversaspapalbull1452
3 жыл бұрын
@@COR0NAD0 yeah, I had given the thumbs up 👍🏾. I had already bought the impact tool only from Amazon for $79. The surge is like $150 though. Forget a bunch-a-that.
@salazar3089
3 жыл бұрын
Why does my charger light turns red and green?
@COR0NAD0
3 жыл бұрын
If RED and GREEN LED’s begin to flash simultaneously the battery pack is damaged or faulty and will need to be replaced.
Will have two take a look at it. Thanks for watching and commenting!
@FixItWithMe
Жыл бұрын
I was thinking of getting the multi too. How long can u use the multi tool with the 2.0 battery? Thanks!
@UsserError
Жыл бұрын
it only runs for about 30 minutes of good use. but it has plenty of power and is very nice to carry and use on smaller projects. mine has given me great service and has paid for itself many times over. I've had mine for about 3 years. its held up very well.
@rudeman1914
3 жыл бұрын
I bought both the brush and the brushless m12 screwdriver I also bought the Dewalt 12v brushless and I like the Dewalt xtreme feels better and cheaper
@COR0NAD0
3 жыл бұрын
Agree, I also bought the Dewalt Extreme as well after renting my Milwaukee drill. More comfortable and better priced.
@scottelia8723
3 жыл бұрын
Xtreme line is excellent as well!
@danlux4954
2 жыл бұрын
Can’t be cheaper if you have to buy a whole different setup. If you already have Dewalt then it might be.
@TwinbeeUK
3 ай бұрын
@@COR0NAD0 Which has the finer trigger control, so you can really fade smoothly and easily from slow to fast?
@chrisferron8622
Жыл бұрын
You go over everything except for price. Why most videos never say more details.
@COR0NAD0
Жыл бұрын
I bought it on sale for $120 but I had to order it online because they don’t carry in stores. Thanks for commenting, consider subscribing and leaving me a thumbs up.
@gsc01972
3 жыл бұрын
Don't understand, it looks like a cordless drill but somewhat smaller...not much....most drills have clutches...
@COR0NAD0
3 жыл бұрын
That’s correct this is a cordless drill. However, there are more compact Milwaukee drills available that would definitely beat this one. Thanks again for commenting, consider subscribing and thanks for watching!
@tonelljohndejesus6847
4 жыл бұрын
Will a 1” Hex bit fit without an extension?
@COR0NAD0
4 жыл бұрын
As long as it’s a 1/4 bit, it should fit. So to answer your question yes, a 1 inch will fit completely with no issues.
@Germ1993
4 жыл бұрын
He pry means the length. If its not long enough it will engage and not be sticking all the way out of the chuck pain in the butt to get out
@jesterraj
4 жыл бұрын
But if you havea M12 drill why bother getting this? The drill have the cluthch as well...just my 2 cent....nice review thou.
@COR0NAD0
4 жыл бұрын
I got the Milwaukee originally which is an M12. However, even at its lowest setting it was still going through delicate wood. It’s actually a great drill and just too powerful even on the lowest clutch study. If you look at my latest video I returned it and stated this and ended up getting a DeWalt Xtream 12v cordless screwdriver drill.
@jesterraj
4 жыл бұрын
@@COR0NAD0 understood.
@thetruth5210
4 жыл бұрын
@@jesterraj There are a multitude of reasons to get the screwdriver instead of the drill. I’ll start off by saying I own Bosch tools. 1. Weight, (The difference between a (Bosch) 12 V drill and a (Bosch) 12 V screwdriver from Bosch it is 2 pounds with battery vs 1.6 pounds with battery) 2. Chuck damage, If you’re working on a customer/end-users cabinet or piece of furniture you can damage the finish with your chuck (especially if it is a all metal Milwaukee chuck) 3. Size, I can fit my hand (I can palm a basketball) and PS 32 with a 6 inch paddle bit and a 6 inch extension into a hole that you would cut for an LV1 or an old work box to be able to drill down to be able to pull up wire or cabling. This is not something that you can do with any of the other 12v platforms. If you’re using a drill with a chuck on it this means that instead of being able to keep two things that would fit into your toolbelt like a paddle bit and a 6 inch extension that you’re now heading back out to the van/truck to get a 4 foot flex bit and then after utilizing this bit you then have to figure out where you’re going to put it down where you’re not going to damage flooring or furniture. 4. Delicate, like the reviewer already said it’s just more precise tool.
@jesterraj
4 жыл бұрын
@@thetruth5210 ok great thx...im sure other ppl were thinking the same..
@LL-wc4wn
3 жыл бұрын
@@thetruth5210 which bosch driver you using that is 1.4lbs with battery?
@alexwesson6250
2 жыл бұрын
The model number is my birthday so I should get one for free
@COR0NAD0
2 жыл бұрын
Great idea! Thanks for commenting and consider given me a thumbs up and subscribing.
@jaimeperez6777
3 жыл бұрын
Look into the M4 power screwdriver
@tjp148
Жыл бұрын
That thing is a fucking rip off and the M4 batteries aren't interchangeable with anything else, so why?
@trentroberdeau6399
3 жыл бұрын
Speed control not clutch setting
@COR0NAD0
3 жыл бұрын
Thanks for the comment and viewing!
@gustavomacall4949
3 жыл бұрын
The dewalt xr screwdriver is much smaller and lighter then this Milwaukee. But I believe this Milwaukee has more power. But I have to admit dewalt has the most comfortable grips.
@COR0NAD0
3 жыл бұрын
If you watch my other videos I did pickup a DeWALT XTREME (12v) screwdriver for the exact reason you mentioned. Thank you for commenting and consider subscribing!
@gustavomacall4949
3 жыл бұрын
@@COR0NAD0 knowing that you have used the Milwaukee one , do you think it's necessary to have the dewalt as well ? As a tool guy I find myself finding any reason to buy another tool that I don't need or replacing one that is perfectly OK with a new one .
@jimmyjamessac7171
10 ай бұрын
1/4 inch hex
@julianarodriguez3635
3 жыл бұрын
Need to make the charger a little beefier
@COR0NAD0
3 жыл бұрын
This is pretty standard build on chargers. Thanks for commenting and consider subscribing!
@belikewater8287
Жыл бұрын
Let me show you how to read em 😂😂😂😂
@COR0NAD0
Жыл бұрын
Thanks for the comment!
@julianarodriguez3635
3 жыл бұрын
The chargers kind of cheap
@COR0NAD0
3 жыл бұрын
Thanks for commenting consider subscribing!
@maxfax319
3 жыл бұрын
Wow , why you need screwdriver with 2 speeds and brushless version of it??????? It’s pointless for you because you are DIY guy , you not the factory worker who needs second speed for a tough conditions they have....
@COR0NAD0
3 жыл бұрын
But in case I need it, I have it. Doesn’t cost extra to get it or not comes with it automatically. Thanks for commenting, consider giving me a thumbs up and subscribing!
Пікірлер: 117