Just subscribed. I was looking for a good kruzer test video. Very good. Thanks for the content.
@bigloo2782
6 жыл бұрын
I would run the Kruzer at 2 tone and 14 KZ for maximum depth. Also , and this is very important, I love your Corgi assistant!
@thekruzerboys2323
6 жыл бұрын
Great test there. Another good vid. I have just gone and bought a kruzer....lets hope it lives up to the hype.From 'The Minelab Boys'
@PIETROMORELLI-kq3di
3 жыл бұрын
How did it end?
@jeffebner6701
5 жыл бұрын
Good test. They both seem like great detectors.
@MudMaxMetalDetecting
6 жыл бұрын
Nice tests, in fairness to both machines the hammered coin was very deep so that was going to be a challenge. Thanks for the demo, much appreciated. ATB MMMD
@waynewaddell164
2 жыл бұрын
Another win for nokta well done
@tommytitmouse
5 жыл бұрын
Can anyone please tell me what was the the point of doing a head to head test on two detectors you don`t set each to their optimum performances ? What was that all about ,and what on earth did it prove apart from don`t do head to head tests with detectors as you call it in "Basic settings " ? I want to see the result of both head to head flat out ! If I go to a boxing fight I want to see both boxers going flat out against each other till one wins, not both dancing about tapping each other till the final bell goes.
@andygold
6 жыл бұрын
Am I correct in that the Equinox VDI seemed to be more stable and not vary very widely per target? I'm a newbie, and the few machines I've used...the VDI was all over the place, which made the feature mostly useless.
@cowboygeologist7772
3 жыл бұрын
Thanks for posting. I got rid of my Minelab CTX- 3030 because the numbers bouncing all over the place drove me crazy. I have used every technology since 1973 (BFO, TR, VLF, PI and ZP) but pretty much only have my 1000 and 7000 now and just stick to Nevada Gold. I'm looking for another coin machine but can't decide on what. I don't do total underwater or saltwater environments.
@spookmore
6 жыл бұрын
There is a low tone on 3rd target.with 2 way target reponse..still it gives people an idea of the sound of the detector.
@Reinforcer82
6 жыл бұрын
Kruzer would have done better in deep mode I think.
@JonR35
4 жыл бұрын
Put nox on p2, f2 or especially prospect 2 for tiny targets. Prospect 1 and 2 have much more depth than all others. Also you noise cancel with coil waist high so you don't cancel the ground out.
@marksalmon5371
6 жыл бұрын
Run kruzer in 2 tone or deep . I just done air test , they are deeper . Only air test mind . You may get deeper in soil . Cheers
@bassingwithawesomejohnson3202
3 жыл бұрын
New sub, great channel 👍. I noticed you didn't have the Nox in multi frequency mode. If you did, I you would have hit all of your targets. Great video though. Happy Hunting and Good luck. Stay safe and God bless!!
@costinstoica7255
6 жыл бұрын
Hello I need one of those detectors for beach hunting which it better for black sands and surf: under water coil salt water. Tnks anticipated for the answer. Multi kruzer I think? What do you think?
@FindingAlabama
4 жыл бұрын
New subscriber.. Good test
@millsy5094
4 жыл бұрын
IMO the Kruzer is better for depth and the Equinox is better at specifying targets and the sounds it gives off are a lot better. I use the Kruzer, and have detected over spots that an Equinox 800 has gone over and still found stuff that it didn't pick it. I am going to get the 800 soon to change it up. The pair of them would make a deadly duo thats for sure!
@detectoreo3678
6 жыл бұрын
This test does not give any comparative information about these detectors and their range/depth. The only information is that the tester should be more attached to his work because many people suggest such movies when making a decision to buy a new detector. Do not get this wrong Adrian, I just have my opinion after seeing this test. Regards
@abdulhasnkhan
Жыл бұрын
Very good
@anonymousrainbows3410
5 жыл бұрын
both good detectors
@Sapper094
6 жыл бұрын
Think l’ll stick with my Deus, the Nox sounds like other Minelabs,and l’m not musically gifted, the Kruzer signals sound irony. I like my crisp sharp clear Deus signals.
@charlesmambourg4447
2 жыл бұрын
About half the coil size on the Nokta Makro vs. Minelab?
@jerrymoseley4930
6 жыл бұрын
Hi,does any one no when the new coil will be for sale for the minlab 800?"please let me no
@deugui
6 жыл бұрын
Hi the 3 tones on the kruzer is more reactiv but not a mode for deep , run it in deep mode or 4 tone . the minelab coil is bigger than makro coil , i think makro kruzer is deeper than minelab . sorry for my english
@spookmore
6 жыл бұрын
deugui Yes Kruzer definaltly had target in 3rd hole.And for me it would have been dig.But guy seems not to familiar with detectors. But 10 of 10 for showing his film.
@americanpatriot661
4 жыл бұрын
I agree
@searchingshropshire
3 жыл бұрын
Kruzer was setup wrong.
@wayneetcetera
6 жыл бұрын
Was the Kruzer giving an iron signal for the last coin? Wonder if the Equinix would have given an iron tone had you pushed the Iron accept button?
@MyVantasticLifeVoyage
4 жыл бұрын
Wayne Etcetera I was gonna say the exact same thing, he had all the iron VDI’s notched out on the 800, which is default for the park setting.
@gizlikalmisdefineler
6 жыл бұрын
Makro dedektöre teşekkürler dünya üzerinde yerli bir firmanın tarafsız bir test ile bizi ğururlandırdığı için teşekkürler MAKRO DEDEKTÖR
@3pasos
4 жыл бұрын
If you test the e Eq800 find gold nuggets or small targets you need the 6 inch coil,this is the real test...see you
@billlanphar4629
6 жыл бұрын
Also The Minelabs coil was bigger of course it should go deeper
@millsy5094
4 жыл бұрын
BUT it didnt !
@user-sp7zt5ub7p
5 жыл бұрын
👍👌
@MetalDetectingGuysUK
5 жыл бұрын
Golden Mask 1+ 18khz or UK would get the small hammy with 12" Spider or 10 x 12 ;-)
@adrianharris7127
6 жыл бұрын
Thanks for your comments guys as I said this was a test mostly out of the box, no special settings and I will repeat the test again with deeper settings to get a fair test between the machines, hell I will even put up my Fisher f75 against them.
@spookmore
6 жыл бұрын
To be honest the Makro Kruzer was getting that last target.when you said no response that's not right.should have got it..with the Equinox..I think both have deep mode.all down to know your detector mate.
@richmcgin
5 жыл бұрын
The equinox did pick it up, you could hear it in the threshold
@millsy5094
4 жыл бұрын
@@richmcginIt did not.. it picked up fragments on the signal and tiny ones at that. The Kruzer actually picked up a target.
@jimmyd2153
4 жыл бұрын
@@millsy5094 Exactly, the Kruzer hit it every time. The last one would have been totally missed by the Equinox. I was confused when he said 'both' detectors had trouble. Shilling for Minelab a little lol.
@quadplay2591
6 жыл бұрын
Kinda makes muck of your air tests right...
@XDetector
6 жыл бұрын
Cual prefieren ustedes?
@Kawaiinichan1234
4 жыл бұрын
Un detector Chino
@XDetector
4 жыл бұрын
Fernando Andres 🤣
@ianbaker3281
6 жыл бұрын
It looks like it was the volume you set at 25, as the sens is set on the main screen.? And the makro was at 19khz but the nox was at 10khz, not really a true test, also don't put them so close together you can't cross the target without hitting the next., also set the sensativaty the same, ie. 5=20,10=40 15=60,20=80 25=100 from the nox to the kruzer. Loads to change on the test!
@tonylane9007
2 жыл бұрын
Try lowering the recovery speed on the 800 it increases the depth more than sensitivity try 2
@rn1731
5 жыл бұрын
Gold and silver?
@chasinghistorysd9684
6 жыл бұрын
Hi, Mind if i ask why you were running 10khz instead of Multi on the Equinox?
@adrianharris7127
6 жыл бұрын
ChasingHistory SD I thought it would give a good comparison with the Kruzer as the Kruzer only has 3 frequencys
@netfella
6 жыл бұрын
Did you mean to test the nox in only 10khz rather than multi?
@RunMissouri
6 жыл бұрын
Detecting with James yeah you switched to 10khz fumbling around with noise cancel. you compared kruzer least deep mode not full gain 19khz vs equinox 10khz at full gain. apples to oranges
@southernreign1
5 жыл бұрын
@@RunMissouri I did not understand that, compare a multi frequency detector (nox) that is designed to detect at 5 frequencies at once and the single frequency only detector (anfibio) then you turn off the nox's multi frequency capability. Not a true comparison.
@darksceptor9933
6 жыл бұрын
Excuse me, but on that last coin, the Makro was hitting and making a tone. The Equinox did nothing. I give the Makro thumbs up on that one!
@Knightyme
6 жыл бұрын
Perhaps a few points for the Equinox. It was not ground balanced at all, noise cancel was done wrong (coil needs to be away from ground), it was in 10kHz single frequency so as to mimic the Makros setting of 14kHz. so 15kHz on the Equinox would have been a fairer single frequency to choose. Both seem to be good machines and once setup and calibrated right will serve their owners well.
@americanpatriot661
4 жыл бұрын
@@Knightyme the makro was in 19khz not 14khz
@CripNchill
4 жыл бұрын
Kruzer had a iron tone. Nox was silent because he had the iron disc... He could use the Multi mode, to see what would happen, because Multi-IQ gives you more depth.
@samsamov9610
5 жыл бұрын
The test is not entirely correct. Let me explain why: Before laying the coins, on each pit it is tedious to carry out soil adjustment, only after this, put a coin and test it.
@GALAmetalD
6 жыл бұрын
nice test
@treasurehuntingpro1214
6 жыл бұрын
Metal detecting Romagna Makro was reading low tone 2 way.
@theMasion
6 жыл бұрын
Wot....! No air balance during boot up... School boy error...
@pasblan1
6 жыл бұрын
et oui je pensse
@marksalmon5371
6 жыл бұрын
Coil size and frequency matters , the Knox always should be deeper. .. Nice test ...
@CoinandRelicOntario
6 жыл бұрын
Mark Salmon What theory do you have that the Equinox should always be deeper? The bigger coil on the Equinox?
@brianzchuk
6 жыл бұрын
Just a fanboy.
@FrankFenker
6 жыл бұрын
Hola Adrian, buen video y muy buenas explicaciones amigo, me suscribo con el nº 56 y un like y te invito a que pases por mi canal y te suscribas, si te gustan los videos, un saludo
@Sapper094
6 жыл бұрын
Not recommended to start up any machine with the coil on the ground, let alone set it up on the ground, you might be setting up with a lump of iron underneath. No being funny, but those Kruza signals all sounded shite.
@marksalmon5371
6 жыл бұрын
Test all coils sizes then , small to large . Tell me ,what's deeper . Simple
@user-do2he3ky4m
2 жыл бұрын
Частоту переключи на 15 20 40 или мульти ивсё увидиш🖐
@sergej9434
6 жыл бұрын
Deep,4 tone???????(Kruzer)
@multmentofemkereso7479
4 жыл бұрын
What you thinking whitch mode the moost better for the maximal deep?
@JCPinCt
6 жыл бұрын
I noticed you ran the 800 at 25 sensitivity, I believe that is full sensitivity, most of us could never run it that high due to excessive chatter.
@adrianharris7127
6 жыл бұрын
John Pacheco I ran it at full sensitivity to make sure I got full depth
@JCPinCt
6 жыл бұрын
I think a more reasonable would be at 22 as I have seen in most tests done. Thanks for the testing anyway.
@arnaud4750
6 жыл бұрын
you can lower the reactivity also to increase the depth
@JCPinCt
6 жыл бұрын
Do you have a reactivity on the 800?
@arnaud4750
6 жыл бұрын
yes it can go from 1 to 8
@user-wk6yv5vt6k
4 жыл бұрын
Приветствую
@steveningram865
6 жыл бұрын
That is not a true test your holes are not filled in
@MetalDetectingItalia
6 жыл бұрын
remove the discrmination from the equinox and redo the test
@andy23903
5 жыл бұрын
Do you get more depth if you remove the discrimination ? Cheers
@mrtunabeat7282
6 жыл бұрын
How is the weight distribution for the equinox?
@adrianharris7127
6 жыл бұрын
Mr Tunabeat the nox is ballanced very well and light weight
@mrtunabeat7282
6 жыл бұрын
Thank you!
@sergej9434
6 жыл бұрын
3 tones- gain 94?????👎98👍👍.
@matthewjenkins3149
5 жыл бұрын
Fisher 75 would have got last target...and got both machines...just saying.
@darrenbunce1659
6 жыл бұрын
Thanks for the review... not going to buy either of them...… sticking to the garret AT pro....
Пікірлер: 106