Very nice! Hope you have a youngster that can enjoy it for years to come.👍
@bonangvlog517
4 жыл бұрын
Nice bike
@sedyrivera3412
2 жыл бұрын
how you did you install the brakes on to the wheel and the frame
@kenwesters7834
4 жыл бұрын
Nice work!
@sidneifernandes122
4 жыл бұрын
Sou brasileira gostei desse quadro vc pode mandar as medidas desse quadro por favor?
@ripwaeh
4 жыл бұрын
Very nice! How did you make this picture video?
@waynebrown5428
3 жыл бұрын
Nice
@ryangrey4009
2 жыл бұрын
Have you got the bike drawings and specifications as I would like to do a bike
@user-eh5jr7yh2f
4 жыл бұрын
Мотик зачет
@SuperGlacierGirl
4 жыл бұрын
Umm, no noticed that the front fender was on backwards?
@cmuzic1
4 жыл бұрын
Not on backwards. The Fenders are custom, no holes drilled until you align them were they fit. We put the front one on pushed forward so as to fit the 3D embossed scooby picture where it can be seen while riding.👍
@StupidEarthlings
4 жыл бұрын
@@cmuzic1 well, Brad had a point, it does LOOK backwards. Especially from the side view.
@GratefulEd907
3 жыл бұрын
I was thinking the same cool little mini though
@gaberson81
2 жыл бұрын
How’s the quality of that frame?
@cmuzic1
2 жыл бұрын
It’s a sturdy frame!! Nice light frame
@sean7058
2 жыл бұрын
Yea mini bike put together
@isaacstar8784
3 жыл бұрын
What kind of clutch?
@cmuzic1
4 жыл бұрын
Friends teenage son put this video presentation together on his iPad. Not sure what software he used.
@fatbuddycat
4 жыл бұрын
I love the bike but hate that engine offset. It's only a couple inches, I personally would have put the break on the otherside and spaced that sprocket away from the wheel to bring it over. I always expect some offset but that's extreme.
@cmuzic1
4 жыл бұрын
fatbuddycat, the offset engine was due to the height of the engine. Had to position the engine so as to fill the gas tank. Gas cap was more centered this way. Have plans to revise the gas tank and put one on top. But so far it works ok the way it is.😃
@fatbuddycat
4 жыл бұрын
@@cmuzic1 yup. Now I see it. Sure wish those Coleman ct200u tanks fit on there with the right side fill cap! $50 is a little much but if your good with words just talk someone into a predator swap on their Coleman and offer them $25 for the useless Hisun with the 5/8 shaft. Then hit me up and I'll take the Hisun with no tank for $20. Problem solved.
@cmuzic1
4 жыл бұрын
fatbuddycat, been looking at one of those aluminum gettobike tanks to fit between the seat and front handlebar. It would dress the bike! This bike will throw a big guy off! Wheelies at 1/4 throttle!
@fatbuddycat
4 жыл бұрын
@@cmuzic1 That's how my DB30S is with the P212 non hemi stock is. My ct200r is a 196 putting down 15HP, I run a TAV 30 that I can at least launch off. It's a clutch killer for sure. I'm not a ghetto bike guy so much either, if you could wrap or paint that aluminum tank to look like a prop that would be really cool. If it were anodized to match the paint scheme it would be a high light at the shows for certain.
@sidneifernandes122
4 жыл бұрын
Pode mandar medidas por foto
@Chris-707
4 жыл бұрын
What size are the wheels?
@cmuzic1
4 жыл бұрын
6”
@BigSparrow.
3 жыл бұрын
What size clutch please
@user-eh5jr7yh2f
4 жыл бұрын
Сколько можно было изоленты искурить чтобы такую музыку включить
@williambankart5335
4 жыл бұрын
Venda?
@bbaaspencer1
4 жыл бұрын
Straight * brake* I have a brand new Azusa forks and frame. I’m stretching it 6”
Пікірлер: 35