Nice one! I'm glad I came across this video because otherwise i was convinced i had to remove the whole inner door panel and window, which would have been a nightmare job. Thank You, Lovely car by the way 👍👍
@tweedbean
3 жыл бұрын
Thanks glad it was useful
@Looney2021
3 жыл бұрын
That’s excellent.. I spent ages trying to refit these handles before watching this video!👍
@tweedbean
3 жыл бұрын
Glad I could help!
@stephenhastewell
2 жыл бұрын
One year on and your video is still useful! Used the trusty hair bobble hack on the drivers door. Snapped at the very moment it engaged, at least I didn't have to dig it back out 👍
@tweedbean
2 жыл бұрын
Thanks glad it was useful
@ItzD3fW1sH
4 жыл бұрын
Thanks for this, proved very useful when fitting mine today. I ended up using some long string for the drivers side to pull the latch, was a bit of a pig though. Got there in the end!
@tweedbean
4 жыл бұрын
Thanks for watching, glad it was useful
@skaterboybbrb2849
8 ай бұрын
Very helpful. Just done mine using your guide. Thanks Brum.
@tweedbean
8 ай бұрын
Thanks for watching, glad it was helpful
@frostyarnie2941
3 жыл бұрын
Thanks! I need to remove the handle to replace the door handle LED light. Very useful video. 👍
@tweedbean
3 жыл бұрын
Good luck and thanks for watching
@mrivs1154
2 жыл бұрын
Can the LEDs be replaced without buying a whole new handle? If so what bulb is it? I've literally searched everywhere and all I find is that the whole handle needs to be replaced!
@tweedbean
2 жыл бұрын
@@mrivs1154 thanks for watching, sorry I have never looked at the bulb but you can used door handles cheap
@mrivs1154
2 жыл бұрын
@@tweedbean I took the handle off either way to get a look at the connection and whoever changed the handles before I owned the car, seeing as I only owned it for a week, hadn't put the wire in fully so it didn't clip in, therefore resulting in it either flickering or not working working at all. Thanks again for you're help with this video made it a lot easier for me.
@rorywheeldon1623
4 жыл бұрын
Excellent, Thanks for sharing.
@tweedbean
4 жыл бұрын
Thanks for watching
@drchuck72
2 жыл бұрын
Great video. Hopefully I will be able to replace mine fairly easily. When removing the keyhole cover, do you just lightly pry it off from the back?
@tweedbean
2 жыл бұрын
thanks for watching, from memory there is a little slot on the underside of the keyhold cover that you put something in
@habbadabba
3 жыл бұрын
Where did you get those grey handles that match the white silver so well?! I can't find them anywhere. Have the black ones ready to fit but these look even better - I have the same colour car as you.
@tweedbean
3 жыл бұрын
I had the chrome ones painted by a local Body shop.
@habbadabba
3 жыл бұрын
@@tweedbean Ah nice, good thinking. Could sell the black ones I've already bought, or just fit the black.... hmmm
@AlbaderBohamad
3 жыл бұрын
Thanks for sharing. I'm thinking about removing my handle bars to paint them black. Perhaps I'll strip the chrome on them if it's safe for handle material before painting them black. Do you think it's a good idea or should I just wrap them in black?
@tweedbean
3 жыл бұрын
Mine are painted, I would hand them to a body shop to allow them to prep them correctly based on their experience.
@flaviogomespereira
3 жыл бұрын
It was hard to remove the chrome part to paint it? I want to do the same, color matched the doot handles but o don't know if the chrome part is removable from the handle Thank you
@tweedbean
3 жыл бұрын
Hi thanks for watching, it’s not too bad, from memory there’s a screw and a clip on the back. The hard bit is the fact there is also glue under there which is tricky to split but it is possible. I used plastic trim tools to get between the chrome and handle from memory. It’s not the simplest of jobs but is worth it
@flaviogomespereira
3 жыл бұрын
@@tweedbean thank you mate I will give it a try 👍
@funkyboyx5991
3 жыл бұрын
ive got a mini cooper sd 2012 and i dont have the bung hole to get to the bolt anyone else have this problem? what do i do thankyou
@tweedbean
3 жыл бұрын
Hi this video covers the 3rd gen Mini 2014 onwards. As yours is an earlier model the door handles are very different and cannot be removed using this method. Yours are much more tricky to remove. You have to remove yours by removing the door cards and a lot of faffing in a very tight space. I don’t have any videos covering that model just yet but I may in the future
@funkyboyx5991
3 жыл бұрын
@@tweedbean awh man :/ thankyou for letting me know tho! :) appreciate it
@tweedbean
3 жыл бұрын
@@funkyboyx5991 it can be done, are you on Instagram as I can send you some tips if needed. Why are you trying to remove the handle?
@funkyboyx5991
3 жыл бұрын
@@tweedbean i am yeah _kyzo_
@funkyboyx5991
3 жыл бұрын
@@tweedbean its a customers but cant figure out how etc
@alm7707
11 ай бұрын
Well I needed to know how they come off, but I hate it when people pull stuff apart that isn't broken. Sometimes you are better off leaving things that work alone. Somebody who has the skills of a monkey will try this and 1 scratch the door and 2 make it not work and 3 hate their car afterwards and buy an E-bike!
@tweedbean
11 ай бұрын
So many parts to that comment lol. I removed mine as I wanted them a different colour, people can use these instructions to do that but also replace if theirs doesnt work etc. And who wants an E-bike :)
Пікірлер: 38