Amazing video! Is there space for a standard 92mm fan at the rear? and can u explain why u didnt use 140mm fans at the bottom?
@SNAPSHOTREVIEW
3 ай бұрын
Yes! Depending on the CPU cooler, you can install a 25mm thick 92mm fan. It's possible to install two 140mm fans, but I chose the Noctua 15T 120mm fans instead. Since this is my first time with an SFF build, I decided going with a smaller setup.
@JamesTodd
3 ай бұрын
@@SNAPSHOTREVIEW so u think a 25mm thick 92mm fan would fit with that same cooler ?
@RamReviews
3 ай бұрын
Very good video bro as always! Although I don't know why this one had a little less image quality... am I right?
@SNAPSHOTREVIEW
3 ай бұрын
Oh! Thank you so much bro! It's really hot here, so I set the lighting low and increased the ISO. Therefore, you might notice a difference in quality. Thanks for the feedback💜🖤
@RamReviews
3 ай бұрын
@@SNAPSHOTREVIEW o I see bro
@PaPa-jd9yi
3 ай бұрын
미니 케이스 빌드 쉽지 않은데 잘 녹여주셨네요!
@SNAPSHOTREVIEW
3 ай бұрын
하이 파파님~ 댓글 감사드려요💜🖤
@kentrisjore4186
3 ай бұрын
Is that support hdd 3.5 ?
@SNAPSHOTREVIEW
3 ай бұрын
YES! It's possible to mount 2 or 3 HDDs in front of the PSU👍
@mikeland2000
3 ай бұрын
Можно узнать саундтрэк в конце видео.
@SNAPSHOTREVIEW
3 ай бұрын
Thanks a lot!
@CDubbsW0rld
3 ай бұрын
Was the rear fan exhaust or intake?
@SNAPSHOTREVIEW
3 ай бұрын
Oh, I used it as an exhaust fan! Thanks a lot👍
@LIFE-n8p
3 ай бұрын
누가 보면 귀엽게 생긴 대형 스피커 인줄 알겠네요 ㅎㅎ
@SNAPSHOTREVIEW
3 ай бұрын
ㅎㅎ 감사합니다~ 즐거운 주말 보내세요💜🖤
@ViperianGaming
3 ай бұрын
I wish i have one :)
@SNAPSHOTREVIEW
3 ай бұрын
I wish I had one too, bro💜🖤
@freeloaderfs
8 күн бұрын
Dope
@SNAPSHOTREVIEW
4 күн бұрын
Cheers!
@Physics072
3 ай бұрын
The thing I like about mesh is all the dust that goes in + the noise that gets out. Also if you get a drink spill its sure to go right to the electronics with little to no diversion. Whats not to like? Also by not putting a object in the finished product you get no sense of scale. Put a quarter next to it and find its smaller than a quarter WOW. Or maybe its bigger than a bucket of KFC we shall never know.
@SNAPSHOTREVIEW
3 ай бұрын
Thank you for the great advice!! I'll keep your suggestions in mind for the next video, which will also be an SFF chassis!
@Physics072
3 ай бұрын
@@SNAPSHOTREVIEW Really that little case and MB is all you need and easy to carry around/move. I went bigger mesh with same gpu and x3d.
@james-uz4xc
3 ай бұрын
Well done, boy! It's more expensive that it looks😊
@SNAPSHOTREVIEW
3 ай бұрын
Yes, it is! Cheers bro!
@강민호-x6f
3 ай бұрын
ㅈㄴ 귀염뽀작하네
@SNAPSHOTREVIEW
3 ай бұрын
ㅎㅎ 감사합니다👍
@emxn120fps
3 ай бұрын
first
@SNAPSHOTREVIEW
3 ай бұрын
Thank you so much!
@azbzmy
2 ай бұрын
It would be perfect if it's 40 Super series card 🙌
@SNAPSHOTREVIEW
2 ай бұрын
Yeah! It's my first SFF build, so I used the smallest GPU of mine✌
@azbzmy
2 ай бұрын
@@SNAPSHOTREVIEW Your RTX 4080 Super doesn't fit in the case perhaps ?
@SNAPSHOTREVIEW
2 ай бұрын
@@azbzmy It's possible without bottom fans. However, it's very tight with the panel and we need something like a 90 degree adapter for the 12vhpwr.
@yayie2235
3 ай бұрын
Somehow build like this satisfy my OCD.
@SNAPSHOTREVIEW
3 ай бұрын
Thank you so much! Glad you liked it💜🖤
@charm011
3 ай бұрын
또 한 번 지리고 갑니다. 캬!!
@SNAPSHOTREVIEW
3 ай бұрын
하이염~ 방문 및 댓글 감사합니당~
@RAGNA_94
3 ай бұрын
AWESOME BUILD AND GREAT VIDEO AGAIN
@SNAPSHOTREVIEW
3 ай бұрын
Thank you so much for your support💜🖤
@ducvu2822
3 ай бұрын
is that the stupid case where there is no bottom panel, just a dust filter? I hate that case so much, such a stupid flaw.
@KurosuGon
3 ай бұрын
Gotta let the GPU breathe.
@ducvu2822
3 ай бұрын
@@KurosuGon They could have add a bottom solid panel with hole pattern like the terra fractal's side panel, or bottom panel with square holes like the ch160. A case with no bottom panel is just unacceptable to me
@SNAPSHOTREVIEW
3 ай бұрын
It's structurally similar to other cases that focus on bottom cooling fans. I don't find it particularly unusual! Thanks a lot for your feedback 💜🖤
Пікірлер: 72