as an oldschool overclocker from the late 90's and early 2000's it's great to see someone still playing with phase change
@HardwareNumb3rs
Жыл бұрын
You have to see the 5 stage cascade I’m building then 😁
@inoahmann7542
Жыл бұрын
@Hardware Numb3rs 5 stage?! What refrigerants are you using? I'm thinking about building a 2 stage system with r404a on stage 1, but I'm not sure what to use for the second stage.
@mieciubimber9404
Жыл бұрын
Incredible!
@AMD.Rydeon.Benchmark
Жыл бұрын
Grande! 😍
@stevensavage2684
Жыл бұрын
An absolute boss of a unit! Love your videos, keep it up!
@aessniper
Жыл бұрын
Excelente video want the next jeje, 600w with that hardware +oc+phase changer don't sounds excessive, cheers from Argentina 🇦🇷 🍻
@TheKuiou
Жыл бұрын
this reminds me of my Old Prometeia Mach II GT with Lian Li Case.
@FireTwo
Жыл бұрын
Wish I still had mine 😢
@Bl3s5in
Жыл бұрын
man i just ordered all the shit to do phase change a few months back and I've been waiting on Lian Li to release the v3000+. Now everyone is going to be doing it! I will have to do some other subambient cooling tech to sate the hipster in me
@HardwareNumb3rs
Жыл бұрын
Go with a cascade phase change 😁
@TheBackyardChemist
Жыл бұрын
I cannot wait to see what this PC cooler can do on a 7700X, and later the 7800X3D!
@Mynx31
Жыл бұрын
The 7800X3D will be insane at 200w
@Kelekona_808
Жыл бұрын
Definitely a Mad-Lad overclocking setup! Grats on hitting a stable 6 GHz
@ZombieITX
Жыл бұрын
Metà anni 2000 col mio fidato Asetek VapoChill LS, che ricordi 😢
@8bitchiptune420
Жыл бұрын
Nice video. How is your preparation for Dragonflight?
@muSPKwow
Жыл бұрын
FIIIIIIIIRST!
@StrictlyMMO
Жыл бұрын
Do you have any numbers or plans to test WoW with the 13900k? You're the only reviewer I've seen that tests this game! I'd also be interested if the ddr4 vs ddr5 impact changes going to 13th gen. Thank you for your videos
@leandrodrace
Жыл бұрын
Very nice project my friend, just one thing tho your gpu was consuming only 250w when u measured the 600w total system consuption and I think 3090s can go up to 450w or even 500w but even then still well under 1000 watts, considering it`s exotic nature anything under 1000w sounds pretty good.
@HardwareNumb3rs
Жыл бұрын
Yes, the GPU was going from 250 to 400W and the whole system measured at the PSU (ROG Thor 1200W) was around 400 to 600, plus the cooler at 145W the range was around 550-750 in total, not bad for a ultra high end system
@dalaransadoringfan5267
Жыл бұрын
*I pray* You get ahold of a Ryzen 7950x or below and see how it stacks against the 5800x3d out of the box in WOrld of Warcraft. and also with insanely tightened ram. Hope you get your hands on it!!
@HardwareNumb3rs
Жыл бұрын
I will for sure!
@Paraclef
Жыл бұрын
Keep the tartarian technology up.
@Paraclef
Жыл бұрын
Hope that you will get the 4090 soon, to see if you are still gpu limited. By how much the 12900KS beats the 5800x3d ?
@gtijason7853
Жыл бұрын
This is a great build, how is the cost of going smaller, quieter and with more control vs using "standard" condenser, fan and Danfoss recip compressor ?
@HardwareNumb3rs
Жыл бұрын
The plate heat exchanger it can be found around 39€, the compressor with inverter at 160€, the Bartx evaporator with mounting kit is at 160€, add some for the pipes and stuff and 10€ for a small 400g tank of Propylene, isn't expensive at the end
@nanonxpc9677
Жыл бұрын
Awesome! But what about minesweeper?
@HardwareNumb3rs
Жыл бұрын
hehe ludicrous speed!
@TheBackyardChemist
Жыл бұрын
Here is an idea, maybe you could use the evaporator temperature to do PID control of the compressor RPM.
@HardwareNumb3rs
Жыл бұрын
I could try to use an arduino or Raspberry PI to do a better integration, lot of stuff I can do here :)
@ben_ger1988
Жыл бұрын
hey mate you are the only youtuber that makes world of warcraft benches. Can you please give us ryzen 7k benches for shadowlands ?
@HardwareNumb3rs
Жыл бұрын
Early next week I have a 7950X and a 7700X to test on WoW 😉
@ben_ger1988
Жыл бұрын
@@HardwareNumb3rs ty cant w8 :) keep up the great work !
@stevofinj
Жыл бұрын
I'm confused, was GPU power consumption included in your total figures? Just curious because you said 600 watts total but the math just doesn't add up to me
@HardwareNumb3rs
Жыл бұрын
the GPU was going from 250 to 400W and the whole system (without the cooler) measured at the PSU (ROG Thor 1200W) was around 400 to 600, plus the cooler at 145W the range was around 550-750 in total
@gtijason7853
Жыл бұрын
@@HardwareNumb3rs Still very, very good numbers compared to any single stage I've seen. Just my SS ( RunMC Under the Ice with Danfoss SC18CLX.2 comp R507 poe oil ) slight overcharge to run -40C typically under full load uses at minimum 800W
@HardwareNumb3rs
Жыл бұрын
@@gtijason7853 The performance of this new blcd inverter is quite remarkable, this is a 7 cm3, yours is a 17.68 cm3, much more powerful. This little one considering the dimensions and the very low noise is one of my favorite
@stevofinj
Жыл бұрын
@@HardwareNumb3rs that is amazing! I would absolutely run that daily! I'm very impressed sir, good work!!
@gtijason7853
Жыл бұрын
@@HardwareNumb3rs It's pretty amazing to be honest
@CESAR_H_ARIAS
Жыл бұрын
How this would compare (power consumption /performance) vs a 120-140 mini ice fridge like the one i use on my co2 laser tube. (It keeps my destilled water at 16°c all the time )
@HardwareNumb3rs
Жыл бұрын
Depends a lot on your evaporator speed and refrigerant used, to run at 16C it will probably have a very high load capacity, going down in temp you need much more power. Do you know what kind of refrigerant gas it uses?
@kennyj4366
Жыл бұрын
I'm really surprised to see the 3090 using 51% in WOW. I'm still using a 1080Ti and at times it is using 80%-90% in Dungens and Raids.
@HardwareNumb3rs
Жыл бұрын
It is weird yes, with the CPU pushing like that finally that GPU is working in full :D
@antoniogiorgi7713
Жыл бұрын
N.1
@yooanto9465
Жыл бұрын
Do you think E-cores are useful when gaming online or it hurt performance?
@HardwareNumb3rs
Жыл бұрын
It hurt performance on auto, if you set manually the ring ratio to at least 42 you can leave the e-cores on
@yooanto9465
Жыл бұрын
@@HardwareNumb3rs I don't know how to overclock because it will not be stable. My score is p cores 93 E cores 79 Just want stable manual setting. Which value should I put? Cores numbers 2,3 are favourite So 1.34v for 52 Other cores are 1.4v for 51 ghz Thus results shown on asus z690 hero
@Mcmanus9442
11 ай бұрын
Have a link or contact for who made the cpu block? I’m interested
@jackoneill84
Жыл бұрын
My 10900KF/3080 system pulls about 450 watts when gaming. So another 150 watts would be a non issue.
Пікірлер: 51