hello po sir cielshock! taga california po ako at kakabalik ko lang po sa hobby after a 15 year hiatus your videos are awesome . dami ko na po natutunan sa mga builds niyo need ko na po kasi pag aralan ulit yun mga basics saka yun mga bagong chassis nagstart ako mag tamiya nun super 1 era pa . thank you po sa pag share ng videos and tutorials tulad nito godbless po!
@NoobWorxmini4wd
2 ай бұрын
Thanks keep ob running!
@Sincerely_Juliaxx
5 жыл бұрын
Great Build for tuned class mate! Keep it up! Happy Holidays from PH! Godbless!
@inspi.ration
5 жыл бұрын
Nice build sir
@michaelzagado3832
7 ай бұрын
I have a super 1 chassis setup proto saber JB
@NoobWorxmini4wd
2 ай бұрын
Share it up
@omayjoseph4916
5 жыл бұрын
Was the number "33" written on the motor is the speed reading of it in a speed checker?
@NoobWorxmini4wd
5 жыл бұрын
Yes sir
@quipayano962
5 жыл бұрын
Sir, may I ask what chassis type, what gear ratio, what kind of battery, and what tyre diameter did you use when you tested this motor that gives you 33kph? Thanks!
@NoobWorxmini4wd
5 жыл бұрын
@@quipayano962its all stated on the video everything is alteady broken down
@quipayano962
5 жыл бұрын
@@NoobWorxmini4wd Ah okay.. I thought you tested this motor to other unit which is a "test unit" for all your motors. Well your torque tuned is pretty fast. Malupet ang pagkaka break in mo sir. 👍
@NoobWorxmini4wd
5 жыл бұрын
@@quipayano962 top speedwise yes but it still depends on the overall set up and track layout im racing on for its overall performance
@neotopia_ex5822
5 жыл бұрын
Uwi na dito kabayan maligayang pasko!
@NoobWorxmini4wd
5 жыл бұрын
Merry christmas!!!
@engrdpat
5 жыл бұрын
Merry Christmas and a Happy New Year. See you at some races.😊🏁
@ntzutzancmoon
4 жыл бұрын
I usualy had front bumper broke on the thread holes, by too much shock hits. even with two screws it dont last long. tail attach broke by landings or for the weight of the rear castle himself, simply it was not thinked to work with that forces in cornering, I usually reinforce by two holes on the fins trough the chassis and screwed it. the annoying is the loosing tight on motor clips, when happen it pops out and the gears dont make contact. have you evere experienced it? I noticed that more wobbly and less hard and low weight setup helps to mitigate something on shocks like enter cornering or chicane, but yes is unpredictable and less adjustable
@NoobWorxmini4wd
4 жыл бұрын
This set up is made for tuned class and specific track layouts. So if you are using it in a diff category or track layouts that are too much for the chassis that what probably causing your troubles
@dino-cute8083
5 жыл бұрын
Whould you build a tridagger x premium? Thank you😊
@buckybarnes6171
5 жыл бұрын
Sup there cielshock, im just gonna ask if is it ok if my sfm front rollers are facing downwards? Because I want it to look straight not downwards...
@NoobWorxmini4wd
5 жыл бұрын
It should be downwards coz thats ur default roller angle to stay in the track
@buckybarnes6171
5 жыл бұрын
Oh ..thank you cielshock. Im just getting started..and im really enjoying it..I guess im going to watch more of your vids to enhance my knowledge about tamiya..lovin your vids btw:)
@JP-hn6uk
5 жыл бұрын
Merry Christmas idol!
@kylefrancis7101
5 жыл бұрын
Idol
@galihichsanw7258
4 жыл бұрын
What's name behind mechine.? Look like hold up between mechine and chassis,
Пікірлер: 25