I still keep coming back to your vid for your wonderful dipping. About to do my first. Usually paint normally but ready to get crazy. You have the best vid on how. Tyvm. Most mess up and don't use or even explain to use cold water. Then they wonder why it clumps and not uniform.
@ThatJeepGuyDan
3 жыл бұрын
That turned out very nice!
@michaelende1452
5 жыл бұрын
Nice video! Very informative
@seninstudio4373
5 жыл бұрын
Do you get bubble inside the surface of the object? I try mine and i got some bubbles all around
@ashamz8138
2 жыл бұрын
Quality work
@FLSharkdiver
3 жыл бұрын
Nice job brother
@DrDiff952
6 жыл бұрын
Normal Dish Washing liquid works just as good and doesn't scratch up the body like tooth paste will!
@Zero18761
5 жыл бұрын
Ia this attainable by using bosny paint here in phillippines ? Paints im trying to use red.clear.white.silver.black ? Thank you in advance master zen
@anthonygoines1466
3 жыл бұрын
Nice
@fatahillahpasya8407
7 жыл бұрын
hi zen, for paint effeciency, I think it would be more better if you cut the poly body first and then paint it on. those paint is expensive af what do you think?
@Z3NBluster
7 жыл бұрын
It's okay to paint first then cut. Yes, all the 4 paint canz are about $32 total.
@MrTropicans
7 жыл бұрын
zen, what a great video! thanks. Why you're not use any activator?
@Z3NBluster
7 жыл бұрын
Lol, because I am bad at painting. I could have used hair dryer too.
@MaxiMaxLondon
Жыл бұрын
WoW man that’s awesome! Why did you stop making videos 😐
@yukies21
7 жыл бұрын
mismo john! ma try din..hehehehe thanks sa video
@Z3NBluster
7 жыл бұрын
Yes, you're all welcom. Don't forget to hit that like button.
@Jmargz032
5 жыл бұрын
Can this be done with 2 different paint colors for the marble effect, instead of just 1 color (black)?
@Z3NBluster
5 жыл бұрын
I've only used black on its own. Im not sure. So you can certainly try.
@rampastatine9540
6 жыл бұрын
Is it hard to drill holes for it to attach with the damper?
@Z3NBluster
6 жыл бұрын
Nope, you can also drill the holes first then paint it.
@katsumasacordova8769
7 жыл бұрын
maeelibs sakin ung mga hapon d2. gayahin ko to sir.
@Z3NBluster
7 жыл бұрын
Ano ibig sabihin ng, "maelibs?"
@katsumasacordova8769
7 жыл бұрын
Z3N Bluster maeelibs means hahanga sir.
@Z3NBluster
7 жыл бұрын
+Katsumasa Cordova Ah, di mabuti.
@djvasuboi88
4 жыл бұрын
Hi bro. The flim that you peeled off where did it come from? Is is already on it?
@SpicyJax3000
4 жыл бұрын
yes. Lexan clear bodies have that film to protect the outside. You paint the inside to protect it from getting scratched.
@djvasuboi88
4 жыл бұрын
@@SpicyJax3000 oh okie..that's cool. How do we peel it off ? Will it start to peeling off by itself or we need to dry it then start peeling it?
@NigelZqq
5 жыл бұрын
Good day. Is this Only for polycarbonate cowl? How about the cowls from the box can i use this method also? Thanks . beginner here
@Z3NBluster
5 жыл бұрын
If you are going to try with ABS bodies you will need to use TS paints instead. But I have never tried to do this on ABS, so I don't know how it will turn out for you.
@dcoyuniverse
5 жыл бұрын
Sir question gano katagal mo hihintayin from the first layer ng paint. Gano katagal mag hihintay para matuyo? Then after 2nd and so on.
@Z3NBluster
5 жыл бұрын
It depends on your weather. If it's hot, 10 minutes or so are fine. If it's cold try and wait around 20 or more minutes.
@painteshop5883
5 жыл бұрын
Checking can pour normal paint into cold water instead spray paint? Same ?
@Z3NBluster
5 жыл бұрын
I don't know. This is what I know works for Polycarbonate. You need paint that works on Polycarbonate/Lexan.
@caliberinstall
5 ай бұрын
yep,thats what im gonna do
@roscoechannel
7 жыл бұрын
A big success!! 👍
@Z3NBluster
7 жыл бұрын
Indeed.
@bondryharyoanabrang3914
7 жыл бұрын
itu air biasa sama cat khusus poly kan?
@roscoechannel
7 жыл бұрын
Bondry Haryo Anabrang Iya bozzzz
@papacarlbau
5 жыл бұрын
@@Z3NBluster sir can i ask what spray paints did you used amd the glossy coatings and what liquid did you used is that plain water?
@papacarlbau
5 жыл бұрын
@@Z3NBluster tia
@gideon5832
6 жыл бұрын
Hi, can I ask if let say I am bad with cutting these kind of bodies, is it possible to use this method on ready made transparent bodies ?
@Z3NBluster
6 жыл бұрын
If you're not planning to use Poly Carbonate bodies, do you mean to do this on the ABS Clear Bodies? The cleat bodies that come from kits? GIve me an example so I can more accurately answer your question.
@gideon5832
6 жыл бұрын
Z3N Bluster hi yes. To be exact I am looking at using the ABS DCR01 cover. The cover is lightly tinted grey but still transparent
@Z3NBluster
6 жыл бұрын
I honestly don't know for sure. Ice never done it on ABS. But if you really wanted to do it on ABS, a couple of issues you will have. Instead of PS Paints I mentioned in the video you might have to use the TS Paints. But then I've never seen anyone use the Hydro Dip on ABS, so I don't know how the TS Paints will react. Also this method works easily because Polycarbonate bodies have an outer film layer that protects the outside from getting paint splatter. If you want the paint to come through from the underside, you will have to mask the outer layer somehow. Otherwise the hydro dip paint process can be an uncontrollable mess. I honestly don't know how this would turn out. So if you wanna do that, you may need to research the info on your own. We primarily use Polycarbonate bodies specifically because they are lighter and are better for racing. Even though they are a pain to cut, the weight saving they provide is worth it in the end.
@gideon5832
6 жыл бұрын
Thank you zen for the reply. Maybe I will give poly carbonate a shot some time!
@tonysmith7989
2 жыл бұрын
Use a drimmel gives nice edges.
@itscrispee879
2 жыл бұрын
i did not know people collect dixie cups. haha good to know.
@djvasuboi88
4 жыл бұрын
Hi bro..only can use PS? Can use TS ?
@Z3NBluster
4 жыл бұрын
PS paints are for Polycarbonate. TS is for ABS.
@DrDiff952
6 жыл бұрын
When painting, your paint source should be kept at 90 degrees to the surface you are painting if you arc as you are doing your paint gets thick in the middle and thinner on the edges. Something my 30 years of painting Polycarbonate RC bodies teaches
@coffeyscarburetors6437
3 жыл бұрын
When you dipped it you got paint on the outside of the body.
@Z3NBluster
3 жыл бұрын
There's an outside layer of plastic that protects the outer side of the body. If you watch 19 minutes into the video, you'll see what I mean.
@kimrocacorba6428
5 жыл бұрын
Where the film came from?
@Z3NBluster
5 жыл бұрын
The protective film is in every new Tamiya Polycarbonate Body. It is to prevent overspray.
@rafilatief4252
7 жыл бұрын
why do you have to use the PS-58 pearl clear?
@Z3NBluster
7 жыл бұрын
Rafi Latief So that the black paint has something to swirl with. If it does not have the clear with swirl with, the black on its own would not cover the entire under surface of the clear body. The marble shape of the black would not come through very well too.
@rafilatief4252
7 жыл бұрын
so if i use 2 or 3 colours for the dip i don't need the PS-58?
@Z3NBluster
7 жыл бұрын
Rafi Latief That's up to you. Your marbling colors will look very different from the way mine turned out. Use any color except for Red. Red does not coagulate and runs. I don't know why, that's just what it does.
@cheesenoodles9403
4 жыл бұрын
But you actually used red
@tonysmith7989
2 жыл бұрын
@@cheesenoodles9403 I think he meant for the dipping part.
@BOOGiNS
4 жыл бұрын
Did you not see the rear corners got missed completely
@Z3NBluster
3 жыл бұрын
Those corners are not part of the main body, you don't need paint there because it's just gets cut off.
@waqui8341
5 жыл бұрын
do you need a clear body?
@Z3NBluster
5 жыл бұрын
If you're serious about maximizing the performance of your car, yes.
@waqui8341
5 жыл бұрын
@@Z3NBluster ok thank you very much😊
@waqui8341
5 жыл бұрын
@@Z3NBluster so can i hydro dip my dcr body?
@Z3NBluster
5 жыл бұрын
I've never done a hydrodip on the DCR. I think you're confusing, "clear body," with, "Polycarbonate body." Which are you referring to?
@Z3NBluster
5 жыл бұрын
The DCR Body is ABS. Which will require a totally different set of paints. And I do not know how paint for ABS bodies will react with the hydrodip process.
@cristopheraaronbaldovino7917
7 жыл бұрын
how to be you po!!!
@Z3NBluster
7 жыл бұрын
You must do... 100 Push-ups 100 Sit-ups 100 Squats 10KM run For 7 days a week!
Пікірлер: 75