Watch all of my miniDSP tutorial videos in this playlist (part 4 to come soon): kzitem.info/door/PLriHxML5BOuORC1FWqBI4PF9us7yG8IjK
@johnsonty4726
3 жыл бұрын
Hello Brad. Where can I contact you? I have a question on how to import the house curve from REW going to my altitude 16 receiver. Thank you.
@Alexander450R
2 жыл бұрын
Great tutorial series, it helped me get my 3 subs all sounding great. One thing you never touch back on in the end though: Do you leave you LPF in the "Bass" settings untouched at 120hz or do you match that to the 110hz that you crossed the front channels at???
@frankeezee
Жыл бұрын
Hey Brad, I was hoping I could get your input. First off, I used your instructions to calibrate my two 2000PRO subs and found your instructions very helpful. Thank you! I replaced these 2 subs for a couple of Klipsch 12" subs, which are a 1/3 of the price I paid for my 2000 Pro's. Do you feel I would be downgrading the sound if I calibrated "all 4 subs" in spite of the different brand and quality/power output. Should I just leave my 2000 Pros as is, or do you feel I would benefit by adding the 2 Klipsch for a total of 4 subs? Thank you
@mdjak3686
2 жыл бұрын
It's not very often that a dope like me could follow this type of video. I'm happy to say I did follow it. It doesn't get much clearer or better. tyvm. subbed.
@MyAppalachia
6 ай бұрын
Dude, thank you for this series of videos. Great job!
@dustindavis7331
3 жыл бұрын
I have watched so many MiniDSP & REW videos and never knew that you could change the name to identify which subs were which. I cannot wait to see the rest of the videos in this series. Great Video!
@jbones1453
7 ай бұрын
I know I’m late to the party on this. I bought the minidsp and spent 2hrs trying to get sound to even output from the device. I checked all my cables and they all work without the device. Plus the minidsp was being recognized by my laptop and the app was communicating with it (or so it seemed). No clue if I did something wrong or if it’s just a bad unit. Right now I have a refund request in but if you have any tips on what the issue could be, I’ll give it a try. I followed all you setup steps and even watch the HT gurus video to ensure I didn’t miss anything. Everything runs perfect once it’s disconnected so I’m at a loss. Thanks for this playlist even if I don’t get this working. Once again you have done a great job and your time is very appreciated.
@askmatt7283
2 жыл бұрын
Today I started my miniDSP journey and this instruction video made my setup easy. Very well presented and easy to follow. I will be using your other videos for sure. Thank you! 🍺
@brnmaull
3 жыл бұрын
Thanks for the tutorial. I'm in the process of watching videos and reading just to try to comprehend all that I can. I'll be getting this in the very near future. Looking forward to the rest of this series. Thanks for making these videos and keep up the great work.
@HomeTheaterGamer
3 жыл бұрын
Thank you for the comment. That’s awesome to hear. The miniDSP has been amazing so far, dare I say transformative. It’s been well worth the investment. Sure, it takes some time and some guide following to get the most out of, but you will be rewarded for it. I’ve never heard the bass in my home theater sound and feel as good as it does.
@dapitbull2009
3 жыл бұрын
Quick and straight to the point.
@Alexander450R
2 жыл бұрын
Great tutorial series, it helped me get my 3 subs all sounding great. One thing you never touch back on in the end though: Do you leave you LPF in the "Bass" settings untouched at 120hz or do you match that to the 110hz that you crossed the front channels at???
@jomyjose7534
3 жыл бұрын
Hello, It is a great start. greatly appreciate your effort to educate the basics of HT tuning and set ups. one thing I noticed in several home theater You tube , pretty much everyone assume that the listener knows a lot and lot of things are excluded. It would be great if you can make it a complete video for an average HT person. how the HDMI is connected to AV from computer and why, what should be the Master volume setup and levels on the AV, subwoofers, when you tune with the DSP etc.., thanks once again for your effort.
@HomeTheaterGamer
3 жыл бұрын
Thanks for the comment and feedback. The next video will be covering basically all of what you just mentioned, along with explanations as to why we need to do those things. This initial video was focused on the miniDSP integration because the software setup can be the most difficult and confusing part for a lot of people.
@jomyjose7534
3 жыл бұрын
@@HomeTheaterGamer Thanks and appreciate it..
@Night_Watch413
3 жыл бұрын
Nice! I just got one of these and did the basic set up. I can't wait for the following videos so i can learn how to set my settings better with your video walk-through. Thank you!
@btw6695
3 жыл бұрын
This is great information! Thank you. Subscribed. I’m currently trying to work through setting up my mini dsp 2x4 hd and it’s a challenge. My only suggestion would be a little slower pace but love it. Looking forward to your next installment!
@HomeTheaterGamer
3 жыл бұрын
Thank you! I definitely appreciate the feedback. The next video will be slower paced but a bit longer than this one. I’m a fan of shorter videos as it can be easier to find and rewatch sections you need without sifting through non-pertinent information, but if I get enough feedback like yours then it means I’m going too fast and need to adjust. Thanks again.
@missing1102
2 жыл бұрын
Thank you. This is what I have been looking for.
@pete3882
2 жыл бұрын
Great video. Being new at this its awesome to see the very basics. Every step helps. Ty
@BoredSilly666
3 жыл бұрын
Thank you. I have Dual SVS PB2000 and a AVC-X6500H running a 7.2.4 set up and my next upgrade will be a minidsp and u-mik1. I also have a Roksan Kandy K3 hooked up to it for 2 channel listening. Looking forward to learning REW
@shaneducholke364
3 жыл бұрын
Youthman sent me. I am just about finished building my dual Marty's and bought a minidspHD to set them up and one existing sub. I also have powered subs in my towers that I currently have directly connected to LFE. Not sure if I will just ad my Velodyne and use 3 subs use towered subs to have 3 connected. I am sure I will visit these tutorials a lot during setup
@kevinc7910
3 жыл бұрын
Just seen you on Youthman’s page and came right over and subscribe. Thanks for the great tutorial. I’m going to redo my setup first chance I get.
@HomeTheaterGamer
3 жыл бұрын
Welcome to the channel and thank you so much!
@luckymckay
Жыл бұрын
Love these videos! Followed them and really got my subs dialed in. However.... I feel like things fell apart for me when integrating my mains and center. You should offer a remote calibration service. I would certainly pay for your experience!
@HomeTheaterGamer
Жыл бұрын
Thanks for the comment! I'm considering offering remote calibration services, though it may end up being something I rarely do because of the added complexity of the "remote" part. When something doesn't go right, troubleshooting remotely STINKS and can make things take a lot longer.
@ianpierce7366
2 жыл бұрын
Thanks for this Video Man! It's really helpful
@welderfixer
3 жыл бұрын
I spent 8 hours trying to EQ my 2 subs with a Dayton Audio LF-DSP(only does one sub) unit and it bloody confusing and seems to be a waste of time. When the money is available I'm going with this unit for sure. Thanks Brad!
@FatterTony
3 жыл бұрын
Have a look at the T.Tracks DSP mini if you are in Europe. Everything you need and half the price.
@CarlJdP
2 жыл бұрын
Awesome shirt 👍 I have the same glyph for my lock screen wallpaper (Department of Heuristics and Research on Material Applications) 😅
@jonganzer7478
2 жыл бұрын
Very helpful, love the detail!
@davidsagarra9841
2 жыл бұрын
Very informative video!, thank you very much, I am intending to buy one of these for my stereo system (2.0) with room correction purposes. All of the videos that I have found in KZitem are focused on either subwoofers or in the whole HT system; I haven’t been able to find one related to stereo systems.
@dankelleher1918
Ай бұрын
Thanks!
@airman6822
Жыл бұрын
Cant wait to set this up. New sub. I was sent over here by Youthman!
@HomeTheaterGamer
Жыл бұрын
Awesome and thank you! It's amazing product and I can't stress enough how much it improved the bass in my home theater over the years. I hope you find the videos useful!
@adamous00
11 ай бұрын
the updated software tutorial would a great also
@sushiking56
3 жыл бұрын
Thanks for fulfilling my request haha!
@HomeTheaterGamer
3 жыл бұрын
You’re very welcome! Haha. I really do hope people find these videos helpful.
@sushiking56
3 жыл бұрын
@@HomeTheaterGamer I'm definitely finding this helpful haha. Have you considered trying out the Prime Elevations yet?
@uzcateguipedromiguel
7 ай бұрын
Hey buddy. Thanks for everything you do for the av community. Do you know when you will release the new minidsp video tutorial?
@HomeTheaterGamer
6 ай бұрын
Working on it as we speak actually. Going to shoot tomorrow and Saturday and should have the video out sometime next week if all goes according to plan.
@theuvcrew2531
2 ай бұрын
Great video series; I've been watching the various parts to familiarize myself and plan follow these steps soon. A clarification please, as I couldn't find a clear answer on the miniDSP website or in the product manual online - If I want to connect 4 subwoofers to a Denon X3700H receiver that has 2 subwoofer outs, would it be ideal to use both the analog RCA inputs, then assign the front 2 subs to 1 and the rear 2 to the other via the miniDSP software, or connect just 1 subwoofer input from the AVR, and then assign all the 4 subwoofers to it?
@250fTrailRider
3 жыл бұрын
Great detailed videos THANKS
@404010ful
Жыл бұрын
I m glad I watched part one. I have non HD one 2x4 My plugin is 2x4 advanced I'm using for two passive subs that go into a external two channel amp with two seperate level knobs tactile shakers combine with that amp to on its line level sub out. I have my pluggin set to analoge but only hearing one side . nothing is muted my matrix router high lights output one on top and two on bott I'm what could that be one side and not the other I'll watch part two of your video later.
@romanlewandowski9616
3 жыл бұрын
Thanks 🙏 for your videos
@gameroomtheater
Жыл бұрын
awesome video, thanks!
@corvettetexan
3 жыл бұрын
Great video. It was very clear and well articulated. Question: My receiver has 2 independent subwoofer outputs. This video shows the use of a single output from the receiver. Should I use both outputs from my receiver? It has Audyssey XT32 and can adjust each sub individually.
@johandeen6096
2 жыл бұрын
Was wondering this also. When you have Sub EQ (usually when you have XT32) then you should connected the subs using both outputs as described here: www.minidsp.com/support/community-powered-tutorials/201-dual-sub-integration Be aware that two outputs does not always mean both can be adjusted individually.
@dankelleher1918
3 ай бұрын
Thanks! Your tutorial is great. I bought my minidsp 2x4 and am about to start the process with my subs. One sub will be in the front of the room and one in the rear. Do I need to play around with polarity, or it looks like it's called "invert" on the software you were showing. Thanks.
@HomeTheaterGamer
2 ай бұрын
Thanks for the Super Thanks! You can try playing around with the invert function using REW’s alignment tool, as it will show you pretty accurately and instantly what that will do to your subwoofers response. In newer versions of REW, you can also switch the alignment tool to “impulse response,” where you’ll be able to see the impulse peaks and determine if a sub needs to be inverted or not to match the impulse peak of the other subs in your system.
@dankelleher1918
Ай бұрын
One more question if you don’t mind…I have carefully followed your tutorial and have level matched my subs. But when I am playing the pink noise I hear it in the sub and the left speaker. I have set the Denon up the way you said to do and have no high or low pass filter in minidsp. Is this a problem? Thanks!!!!!!
@nalindias2601
8 ай бұрын
Great tutorial series Brad, Thanks! my AV processor has 2 independent sub-outs. I want to set up miniDSP 2x4 HD to connect 4 subs (2x sb2000 and 2x sb3000). Should I connect two RCA cables to miniDSP 2 Inputs or only 1? Thanks
@sickoflookingforuser
5 ай бұрын
The latest UI for mini dsp is nothing like this one but thats not my big problem. I have the mains set to 200 hz crossover but every test tone comes through the mains and the sub. Just the left main if I have that selected, as with the right. :-(
@tetu024
3 жыл бұрын
Thanks for the Tutorial :-) One question with regards to Auddessy do you need to run in it before are after setting up Minidsp ?
@SweCrue
3 жыл бұрын
After minidsp.
@KuldeepSingh-fx7sg
7 ай бұрын
I have a question: I am going to use miniDSP for my two subs, question is: Do I need to run audyssey app once I plug in my new sub or after running the miniDSP and aligning my subs then run Audyssey for speakers?
@detmeringdesign
Жыл бұрын
Hello, great video! :) Do I have to turn on or off the "extra bass" on the Yamaha Reciver. Do the front speakers have to run with when calibrating or can they be turned off? Thank you.
@emalior5000
4 ай бұрын
Hi, I was hoping you could give me some advice. I want to correct only one subwoofer and not touch my main left and right speakers which will all be running via my marantz reciever. So my question is do i disconnect the left and right speakers and try and flatten the subwoofer response independently or do I measure the entire system as a whole crossed over at 90hz via the marantz? If I measure and flatten the subwoofer independently once I add the main speakers won't it just destroy the flat response? I'm thinking it's better to measure the sub and main speakers together but then only tweak the subwoofers response to attain a smoother response?
@kevindill2468
Жыл бұрын
Hi Brad, newb question, sorry. I'm guessing when using two subs and a mini dsp, after all the level matching, etc. Is complete that the dsp stays connected for ever.
@bryansu
3 жыл бұрын
Why do you need to use the "link" in the output section? Isnt that you had just set the route from input1 to output1, output2 and output3 in the first section?
@johannbeckham
3 жыл бұрын
I'm interested to know the answer to this one as well as my Denon 3600h has two subwoofer input
@camaromodz
3 жыл бұрын
Hi Brad, thanks for the awesome videos! Quick question, do you think it would be worth getting the minidsp to EQ one sub? I have a Monolith M-215 and the REW graph doesn't look that bad, but there are a couple dips that could be smoothed out some.
@HomeTheaterGamer
3 жыл бұрын
That’s a really good question and something I’ve wanted make a video on. It can help to easily get the best response out of any sub (since it’s a single sub, the process goes rather quickly), and you can have multiple configurations that you can switch to with different curves set up. But it’s true potential is only seen when used with multiple subwoofers in my experience. If you already have something like Audyssey, I would consider testing that and seeing if does a good enough job flattening things out.
@dkindig
3 жыл бұрын
I have had outstanding results using the miniDSP with a single sub. Using REW and a calibrated mic I was able to get rid of the worst of the dips and peaks by experimenting with the sub location. Then I used the auto-eq with REW and now have a response curve that is flat from the crossover freq and down 3dB at 20 Hz (12" Adire Shiva sub in .707 alignment, sealed 2 cu ft cabinet). The improvement in low end quality was amazing! Quick tip if your receiver does automatic loudness compensation: DON'T use a "house curve", let the receiver do that work.
@camaromodz
3 жыл бұрын
Thanks guys, that was really helpful. I order a unit and will start playing around with it when it comes in.
@maurizio7626
Жыл бұрын
Great videos. Will the mini dsp boost the sub pre out voltage.
@joseespinola3604
Жыл бұрын
I'm trying to setup my miniDSP 2x4 HD but all the tutorials are with the old version of the plugins. Is there a way to download the old version of the plugins?
@Giulifi
Жыл бұрын
Hi Brad! I just watched your video and wanted to know: Can you switch between inputs simultaneously? I would like to have my pc connected via USB and a chromecast audio via RCA, and was wondering if miniDSP could automatically select the input that is playing audio.
@keepitshema
9 ай бұрын
May I ask why should I use only input 1 from avr ? What would be used the second one for?
@williamforbes9437
10 ай бұрын
What cable did you use to connect the mini dsp to the subwoofer port on the back of the receiver.
@ernestwaxteriii1179
Жыл бұрын
Hi, I understood Home Theater Gurus but what was the other channel that you suggested? I think you are saying "See All Guy Stuff", but I can't find that channel. Thank You.
@HomeTheaterGamer
Жыл бұрын
The other channel is called CO Guy Stuff. Here is the link: kzitem.info/rock/qHMOtoz7YfS56ky_s7c0kw.
@lensmand1
3 жыл бұрын
Have you done a rel 3D system? I have two subs as a stereo pair, doing high and LFE. a third on the centre channel - doing high level no LFE and a fourth paired to the rear pair doing high and LFE. Will this process get the best performance for the three subs handling the LFE ? What about the fourth? A link if you have already done this please :-)
@kiptanoi4422
Жыл бұрын
I just got the minidsp, to setup my 2 subs. (One sub out goes to in 1, and out 1 go to sub 1, out 2 on minidsp, go to sub 2) But how do I connect my left and right channels in to minidsp into in 2? I dont have any pre amp outputs on my AVR, I only have 2 subwoofer outputs on it :/ And my source is a computer.
@tommyboy049
Жыл бұрын
was there ever a video on hooking up speakers?
@kdglock4491
2 жыл бұрын
I have 2 monolith 12s and 2 klipsh 12s. Obviously the monoliths hit way harder and are much better. Will this box work for these 4 subs and make them sound better
@steveschwier4782
3 жыл бұрын
Can you use the MiniDSP2x4 to make these corrections or are the differences between the MiniDSP 2x4 and the MiniDSP 2x4 HD so great that the lower price version won't function well enough to control 4 sub woofers?
@RedRyz3n
2 жыл бұрын
I’m looking to replace this now. It stops passing audio randomly over usb. Their forum site is filled with people complaining about the issue for about 4 years and no fix whatsoever.
@daledecker8542
2 жыл бұрын
I am a little confused. I am looking at this for hopefully giving me the ability to install subwoofers on either a McIntosh or Hegel which don't have subwoofer out. Will it work for these devices?
@kiptanoi4422
Жыл бұрын
What kind of cable do I use if I want cable from minidsp hd output to my 5.1 reciever? Is it just a subwoofer cable (single rca to dual rca?) I want cable to my left and right speakers Please give link to cables to use
@modvind
10 ай бұрын
Video starts at 1:55
@HomeTheaterGamer
10 ай бұрын
There are also chapters to make it easier to navigate to exactly where you want to go or a section you need to rewatch.
@gingerninja7187
Жыл бұрын
Hi if like me I’m using 2 subwoofers, that are connected to my arcam av40 and have already calibrated with Dirac, I assume from the subwoofer outputs on the arcam I would plug into input 1 and 2 of the mini dsp , then connect my subwoofers to outputs 1 and 2 on the mini dsp is this correct?
@f16thud
3 жыл бұрын
Is my Minidsp 2x4HD Defective? I have the cables physically installed as follows. Reciever LFE to input 1 on minidsp, output 1 to L Sub, and output 2 to R Sub. All the inputs and outputs match on the MiniDSP routing screen on the computer, with what is physically installed. All unused channels/routings are turned off. I noticed no signal (visibly/audibly on the computer screen meter output channel 2) going to my R Sub. I then looked at the other input/output meters, and there is a signal going to output 3 (even though its turned off on the routings). I then unmute output 3, and get signal to my right sub which is physically connect to output 2! Hmm I only plan to have two subs, so this isnt a show stopper. So Im fine with my work-around, I guess! Thanks
@jkane1341
3 жыл бұрын
If I set this up as a 2.1 device with my windows computer and then plug it in to my linux desktop via SPDIF will it work they way I configured it with windows?
@trishpipkins
3 жыл бұрын
There's just one problem. We need a bigger TV. Having three subwoofers is something I had no idea I need in my life. But now that you've got them hooked up I just can't go back to life with two subwoofers. I guess I should look into working more overtime to pay for it. 😂😂😂
@HomeTheaterGamer
3 жыл бұрын
I didn’t know it would make that drastic of a difference, but holy cow. I can’t go back either. Haha.
@trishpipkins
3 жыл бұрын
@@HomeTheaterGamer I'm not mad. I just need more money so you can work your magic and I can watch things in the style I'm getting accustomed to. First you ruined me on coffee and now home theater. 😂
@Snskch3
2 жыл бұрын
I just purchased the mini DSP (non HD). Do I put the coupon in for the HD version and download the same plugins as the HD?
@stephenpeter6529
2 жыл бұрын
How do you use a miniDSP with XLR cables. I only saw RCA inputs and outputs?
@jerryjohnson3801
3 жыл бұрын
I don't have a single out on my integrated amp or my Elac 10" just RCA L/R how do I hookup the miniDSP ?
@MichaelMolinaM
2 жыл бұрын
This may sound like a dumb question, but I'll ask anyway. after you're done with all the eq, time alignment etc... does the minidsp need to remain connected to all the subs to retain the settings?
@HomeTheaterGamer
2 жыл бұрын
Not a dumb question. The answer is yes, the miniDSP needs to be connected at all times after everything is done as that is what stores and applies the EQ and time delay setting a for each individual subwoofer.
@Povell81
3 жыл бұрын
@Home Theater Gamer: Do you see a benefit in using the SVS subs app and MiniDSP or do you think one overwrites the other?
@FatterTony
3 жыл бұрын
The SVS app is great, especially if you want to boost the output temporarily but the MiniDSP does everything the SVS PEQ does and more so it would be best to leave everything stock and calibrate with MiniDSP.
@naughtyca131970
3 жыл бұрын
my software looks different is this a newer version, mine has a lot of orange boxes
@mandeepkalsi979
2 жыл бұрын
Hi, is it possible to replicate iTunes (now called Apple Music) EQ and Sound Enhancer using miniDSP???
@donnienathan7821
3 жыл бұрын
Is this recommended when using only one subwoofer?
@anoopnair6376
Жыл бұрын
Hi Brad li just love your videos my dedicated home theater is under construction and I am planning to put 2 Active subs & 2 passive subs. 2 passive subs will go behind my AT screen and 2 Active subs will be placed into the room as required. as I understand the Active subs input can be directly connected to DSP. but for my two Passive subs, I will have 2 dedicated Amplifiers with XLR in ( for which I will be using a special RCA to XLR converter cable ) my question is is it ok to plug the out of DSP to the dedicated sub amplifier with RCA- XLR cable ? and do necessary adjustments on the amplifier ? in the case of Mini DSP, how do you suggest connecting 4 subs? your reply would be highly appreciated
@mxmang
2 жыл бұрын
How do I know what voltage version to buy ? I have a pro amp i wanted to control and i think they only run 1volt input or less....
@raulgutierrez6415
2 жыл бұрын
Let’s say I have 5 subs and I have two individual sub pre outs in any avr Should I use 4 subs with the md dsp and the 5th on the avr sub out 2? Or should I daisy chain it to the nearest sub? Or get a another dsp. Which I don’t mind if it’s gonna help?
@doublet147
2 жыл бұрын
Did your mini dsp come with the power cord? Mine did not. I ordered from mini dsp website?
@SpartanKing1968
3 жыл бұрын
If you have two sub outputs from your processor, should I use both or just one for the input? Thanks!
@FatterTony
3 жыл бұрын
It would be better to use one but if you are using 2, you need to make sure that all the settings are set as a baseline / the same on each sub on the AVR/Processor and let the MiniDSP do all the work.
@jrjacobsil
3 жыл бұрын
I am concerned about the mimiDSP noise floor. Can it be used with high sensitivity speakers such as horn based speakers. I imagine a lot of hiss coming from the tweeter unless the miniDSP has a noise gate .
@HomeTheaterGamer
3 жыл бұрын
I can’t speak to that as I don’t have any experience using the MiniDSP outside of subwoofers. Maybe someone else can chime in here and answer your question.
@paulgreenwood69
Жыл бұрын
My receiver has 2 subwoofer inputs. So if I have 2 subs, do I connect them to the 2 inputs of the Minidsp?
@HomeTheaterGamer
Жыл бұрын
You only need a single connection to the miniDSP from your receiver for your subwoofers. I would recommend just using a single subwoofer output from your receiver into the miniDSP.
@obeystormyy2809
3 жыл бұрын
Hi I watch your video About Aoc g2 series 27 is good for console of you answer me plz
@MrPgobeem
Жыл бұрын
Will this apply to a MiniDSP 2X4 not HD?
@cinmaal
3 жыл бұрын
How about when you have two subwoofers daisy chain. How do you connect it to the miniDSP. THANKS
@FatterTony
3 жыл бұрын
Unfortunately you need to buy a separate subwoofer cable if you want to control the subs independently.
@menash41
Жыл бұрын
Can you update the videos for the updated GUI?
@HomeTheaterGamer
Жыл бұрын
Are you referring to miniDSP's new "Device Console" GUI? I'm planning on a doing a video comparing the two soon because I REALLY like the software.
@menash41
Жыл бұрын
@@HomeTheaterGamer yes sir
@stekelly1980
10 ай бұрын
Oh no the minidsp 2x4 HD software is different so I'm lost already 😭
@paulgreenwood69
Жыл бұрын
Can you do this with subs that are mixed? I have two subs from different makers but roughly the same power. Ii understand its not ideal but funds prevent me doing two of the same make
@HomeTheaterGamer
Жыл бұрын
Absolutely! Like you said, it won’t be ideal, but it’s totally doable.
@paulgreenwood69
Жыл бұрын
@@HomeTheaterGamer Thanks! What are the possible issues of doing this?
@HomeTheaterGamer
Жыл бұрын
Main issue would be frequency responses not matching between the two in the lower octaves, which may or may not be noticeable to you. The transient response of each will be different as well(basically how quick the driver can move and respond to a signal), so even when dialed in one might be slightly less responsive than the other. This might not be noticeable at all unless you’re looking at impulse response sweeps in REW.
@dandee1948
2 жыл бұрын
How would set up 4 subs?
@anthony2010707
3 жыл бұрын
Thanks for your video presentation, how would you use the mini dsp when your receiver has two subwoofer outputs, thanks.
@HomeTheaterGamer
3 жыл бұрын
Since the MiniDSP acts as your splitter, you’d only use one of the subwoofer outputs on the receiver. The second output could come in handy if you have the need for another MiniDSP (for subwoofer counts higher than 4) or a bass shaker system.
@ultrasone8450
7 ай бұрын
@kenestra123
5 ай бұрын
Faster,Faster,Faster!!!!!!!!! LOL
@makkkk4444
3 жыл бұрын
Thank you. I have an SVS SB 3000. My room is approximately 9x11 ft. I have one seating position which is directly in front of the TV. Do you think the best position for the SB 3000 may be directly in the center underneath my TV? Let me know your opinion if you will.
@mephInc
3 жыл бұрын
The cheapest way to start is: Place sub in main listening position. Put something on with varying bass (or even sweeps). Literally get on your hands and knees and crawl around the room. Where the bass sounds the best is the ideal location for your sub. Then, if you really want to go down the rabbit hole, you can dive into minidsp, rew, etc. Good luck.
@makkkk4444
2 жыл бұрын
@@mephInc Thanks!
@mephInc
2 жыл бұрын
@@makkkk4444 Hope that helps.
@carloslarard
2 жыл бұрын
They are as they are.. They don't respond emails
@ubacow7109
2 жыл бұрын
Is the software not free?
@charlesgreen4172
2 жыл бұрын
Trying to measure my subs. All 3 subs start at - 10 -20 db then pike at 90 db. Don't look like any grapas I seen.
@DerrickFarrell-ch6ld
3 ай бұрын
Jesus, this guy is going 100 mph. I am so frustrated with mini dsp. Stuck now on the 90 degree file. Its one of 5 steps in 20 second. I can find no info on it.
@firmbutton6485
Ай бұрын
Pause the video or play it slower?
@longplayer8600
5 ай бұрын
first spend a few thou on subs, speakers & amps THEN spend a couple of hundred more so you can spend hours to do this. I'm so done w/home theater bs at this point. 🤦
@HomeTheaterGamer
5 ай бұрын
You don’t HAVE to do this, the point is that you can if you want to because the hardware and information is now available to you. Or just decide that you’re happy and content with the sound you already have. It’s the same with any hobby really. There’s a rabbit hole you can choose to go down or not; that’s ultimately up to you. The fact that the ability to do ANY of this is much more accessible than it was 5-10 years ago is amazing.
@sickoflookingforuser
5 ай бұрын
Can you please talk a lot slower, I'm 58 lol
@davidt8438
5 ай бұрын
Agree, I had to watch it at 75% speed to understand it.
@richardt2353
2 жыл бұрын
Huh? Could you have talked any faster about the setup process? WTF? One or two fewer cups of coffee before you make a video could go a long way. Holy Christ.
@HomeTheaterGamer
2 жыл бұрын
thanks for the feedback. I’ll add a couple more cups next time.
@Youthman
2 жыл бұрын
@Richard T, instead of being ungrateful for a free tutorial, you could simply go to Settings > Playback Speed and slow it down to up to 0.25 speed so you can follow along. Oh, and there's also the pause button too.
@trishpipkins
2 жыл бұрын
Hahaha!! 🤣 This cracks me up. There are around 37,000 views and you're the only comment that says he's talking too fast which sounds like a you problem.
@HomeTheaterGamer
2 жыл бұрын
Fun fact: if you play any of my videos at 0.75x speed, you basically get to hear a version of “Drunk Brad.”
@richardt2353
2 жыл бұрын
@@trishpipkins Yeah, I thought it was funny too. I'm technology challenged, which makes it even funnier. I wouldn't have understood much of this regardless of the speed of his voice. Anyway, it seems I may have upset you or offended you. I apologize for that. Take care.
@michaelcorlet2998
8 ай бұрын
Slow down to fast.
@SpartanKing1968
3 жыл бұрын
If you have two sub outputs from your processor, should I use both or just one for the input? Thanks!
@chriskober1
3 жыл бұрын
Would like to know this as well.
@FatterTony
3 жыл бұрын
1 is fine in most cases so if you use 2, make sure they settings are at 0db etc in the AVR/Processor. The one benefit to using 2 is that you can turn them off individually but that would render the calibration file unusable anyway. The sub outputs we see nowadays is much more useful for systems without a DSP on the LFE line.
@mihaiiliescu1324
Жыл бұрын
@@FatterTony , please be more specific , I have to connect each sub output from AVR to DSP 2x4HD , sub 1 to input 1 and sub 2 to input 2 , the matrix will be in cross in/out . ok . ?
@FatterTony
Жыл бұрын
@mihaiiliescu1324 I don't think it would make sense to plug in 2 sub outs from avr into 2 ins on the dsp as the usefulness of 2 x sub outputs is rendered obsolete when using a dsp. So 1 x sub rca from the dsp then output from the dsp to however many subs you have 👍
@mihaiiliescu1324
Жыл бұрын
@@FatterTony sorry , in this case I cancel one sub out from receiver , is it ok ? i will have one out from AVR and two out from miniDSP to subwoofers , 1 plus 2 < correct , sorry for my dummies q , I am new on this . And another q , I saw in part 4 , the measurements for crossovers for surround and center use asio4all, I cant find this for mac or isn t necessary?
Пікірлер: 157