This is the gold standard informational video! Instant subscribe!!!
@justice8936
2 жыл бұрын
This was great, so helpful and clear thanks man
@pedromoutinho5665
2 жыл бұрын
thanks for providing the correct display values! greetings from Portugal
@patrick5596
12 күн бұрын
I have a bluetran lightning I was getting it up to 90kmph and then all of a sudden it wouldn't go much fast than 55kmph. I figured it was only running on one motor so looked inside and sure enough one of the the motors was not attached to the battery so it was running on one motor then I plugged the motor back into the battery and it the speed hasn't changed top speed sprox 55kmph and both motors are spinning . Would you have any idea what the problem is or i can fix it please
@joebidenshearingaid1618
2 жыл бұрын
You guys should go through the Advanced settings on the Wolf king gt pro . They're a lot of buttons that I’m unsure of .
@epiccycles9
2 жыл бұрын
Yes, we do plan on it. Will release a video of the Wolf King GT PRO TFT display in the coming weeks.
@patrick5596
12 күн бұрын
Is there anyway to reset all settings
@joeigneczi2524
Ай бұрын
So I can only get my mantis 10 up to 15mph max after replacing rear motor and some new front brake hardware, but no matter what I do or change, I just wanna have the option for max speed
@glennlordan9510
Ай бұрын
What yours be recommend for setting P0 ? For Kaabo mantis pro?
@orlatris96
2 жыл бұрын
Hi, thanks for your video. I'm Orlando Tristão and I'm from Portugal. There is no Dualtron technical assistance here and I need to know how to diagnose and identify faults in the Dualtrons, could you help me? I'll be very thankfull. I take the opportunity to ask if the Display can give information about engine or contractor failures, etc? Thank you very much. Compliments
@cleanancleared1455
8 ай бұрын
I can’t get my blade x to connect Bluetooth to the app
@jean-pierremendoza7678
2 ай бұрын
quand j'appuie sur mode y a rien, pas de changement, qui c'est ?
@URASSISGRASS1000
2 жыл бұрын
Thanks for the great and detailed video. I have a kaabo wolf king gt pro with EY3 controller and unfortunately my buddy messed around with it and now battery shows 50% with 83.4v and the charger led is just green and not turning red. Any idea what's wrong with my scooter? Thank you very much in advance.
@epiccycles9
2 жыл бұрын
It's possible that he changed the voltage settings. Yours should be set to 72V
@dirkit247
2 жыл бұрын
Is it possible to swap the display on the new mantis v2 for this one? I feel like this looks way nicer and less cheap than the new one they swapped this one for.
@djsadventures1941
3 ай бұрын
Hey so my scooter out of the box would go 55-60 mph now I got the ey3 replaced bc I crashed now it only goes 50 top
@epiccycles9
3 ай бұрын
check the settings, it's probably not set to 100% power
@Jacksteelmachines
2 жыл бұрын
how do u know how many motorpoles a motor has? i've counted the magnets but they are way more then 20
@epiccycles9
2 жыл бұрын
The manufacturer usually will set it accordingly depending on the scooter. This is something that facotries usually set one time and should not be changed. There is alwyas the chacne they did not do it correctly so you can always verify with them depending on which model you have.
@robindarby1679
2 жыл бұрын
Hello I hope you can help my light keeps flashing on the display how do I resolve this problem cheers Rob …
@epiccycles9
2 жыл бұрын
Hi Robin. Thanks for reaching out. Is there any error code flashing when you turn on the display? Is the light just flashing or does something on the scooter fail at the same time ( ex. the motor cuts out )
@ziusudra1729
2 жыл бұрын
So my wolf warrior 11 shows a 100 percent charge all the time, which im sure isn't accurate. Is there a way to fix that somewhere in settings?
@epiccycles9
2 жыл бұрын
No, that can't be accurate. What does the voltage say? This is a more accurate reading anyway. 67V would rerpresent full charge while 54V would represent an empty battery.
@silbernersurfer8264
2 жыл бұрын
Is the EY3 display waterproof by default?
@epiccycles9
2 жыл бұрын
Water resistant to some rain, no submerged.
@imnumber343
2 жыл бұрын
You should of explained pole magnetics:)
@lukebanks7140
2 жыл бұрын
Mine Is flashing off and on while I accelerate do you know why ?
@epiccycles9
2 жыл бұрын
Hi Luke, It blinks when it’s low on power as way to tell you that it needs a charge or will die soon.
@creativemachine521
Жыл бұрын
Friends, please help. I have a problem, the speedometer does not work, it constantly shows the speed "00", the odometer and charge counter also do not work. at the same time, the scooter drives normally and switches gears. scooter new name Teverun Blade Mini Pro.
Пікірлер: 29