Thanks for the video, gonna try this myself. My power drive has water dripping out just like you described
@SINIS0RSA
3 жыл бұрын
Great video. I'm about to do this with mine Endura.
@FishinTooling
3 жыл бұрын
Sounds good. Good luck!
@DavidPickwell-f9p
6 ай бұрын
Don't need all the musical noise, could use some comments during install instead.
@phillipvantonder7127
3 жыл бұрын
Last Back shaft seal wrongly installed washer must be outside to protect seal from fishing line ets.
@FishinTooling
3 жыл бұрын
I thought so too but that's how it was when I took it off so I matched it during reinstall. This was the first repair since it was brand new.
@GG-sb8fd
3 ай бұрын
You put the outer seal in backwards
@benjiang6493
3 жыл бұрын
nice video... I think you put the 2nd seal upside down : D
@FishinTooling
3 жыл бұрын
I thought the same thing but that's how the original one was seated
@samtate1260
4 жыл бұрын
My prop will not move box inside just makes clicking sound everything works except the prop can move it by hand that’s it
@FishinTooling
3 жыл бұрын
You may want to also replace the brushes then.
@kyleigh2643
4 жыл бұрын
Thanks for posting this, but you're a couple years too late. I had to do the same thing to a Minn Kota Endura 55 a couple years ago.
@gonetolake
Жыл бұрын
Is there a c clip that I missed ? And I got the upgrade kit and the three washers are missing
@FishinTooling
Жыл бұрын
The thrust washers should be on the end of the motor shaft. I didn't get new ones in the kit. Are they stuck on there maybe?
@brockvogel9469
4 жыл бұрын
Did water getting in cause your trolling motor to not work?
@FishinTooling
4 жыл бұрын
Not yet when I found it. I ran it about twice before noticed the drip out of the top end and I pulled it apart and got the water out so I caught it before it caused any permanent damage.
@PetClipdog
3 жыл бұрын
Why didn't you text for Water Leaks before go to the Water?
@FishinTooling
3 жыл бұрын
I had been using this trolling motor for 2 years with no issues. One day I was out fishing and a few drops of water came out of the head after retracting. I immediately came home and tore it apart to find this leak so I cleaned it out and ordered the parts and repaired before using again.
@PetClipdog
3 жыл бұрын
@@FishinTooling You can Text it. Minn Kota recommend to place in a bucket of water and blow air from the high head Unit. If you see bubble so you have a leak and what you have to Change seal.
@scottkinkead6324
3 жыл бұрын
You left out a bunch of stuff a guy should know before tackling this project
@FishinTooling
3 жыл бұрын
Scott sorry about that. What are you having trouble with?
Пікірлер: 21