WOW... That has to be the easiest skid-steer setup I have seen for any pistol-grip radio!!! Many thanks!!!
@arminrc
8 ай бұрын
Thanks for the great comment! Glad the video was of some help to you!
@macxsi
7 ай бұрын
It's cruel that this doesn't has more views... I spent hours trying and after that also way to much time searching for a solution to control my tank steered vehicle with my TX16S, this tutorial is I think the only one in the whole internet and it's soooo good. So yeah for anyone wondering this works on all EdgeTX controllers :)))) thank you sooo much
@arminrc
7 ай бұрын
Thanks for watching and taking the time to write this awesome comment! It seems that there are not that much people out there who drives RC Tanks or similar vehicles. But I am glad the video was of some help to you. Have fun with your TX16S! It is an incredible remote and I wished the MT12 had a similar screen ...
@chrisstone8189
6 ай бұрын
This is great info, don’t even have a tracked vehicle but this makes me want to get one just to setup the model in the MT12. One thing that comes to mind is when off throttle you are using both motors in opposite directions to turn, but while in motion you only cut throttle on one side to turn. Wouldn’t this make the tracked vehicle turn faster when at a stop vs when in motion?
@arminrc
6 ай бұрын
Thanks for the comment! Yes, when stopped the rotational speed of the vehicle would be greater. But I think this is the normal behaviour. Just think of the twe extremes: 1st: the vehicle is stopped > the tracks (can) go the opposite direction when turning | 2nd: the vehicle is at full speed > the only way to turn is to slow down one of the tracks. If you watch a tracked vehicle in the real world you would see that turning in place is a normal thing for such vehicles. And, by the way, the mixing shown in the video could be seen as a starting point. Feel free to improve upon that. For example you could use one of the switch to toggle the behaviour of the vehicle when stopped, so that only one motor runs when turning.
@JF-RC
8 ай бұрын
Hi Armin. Nicely demonstrated 😊😊
@arminrc
8 ай бұрын
Thank you very much!
@FYRC15
7 ай бұрын
Could this configuration work for a crawler to program in 4wheel steering?
@macxsi
7 ай бұрын
if you plan to use 4 motors on the wheels and connect two motors and one site together on one channel, it should
@arminrc
7 ай бұрын
If you have a "standard" crawler (4 wheels/tires and one motor) then this setup does not work. But with the MT12 it should be absolutely no problem to set it up for 4-wheel-steering. This thing is incredible flexible when it comes to programming different "driving modes".
@nathanielbomben5253
8 ай бұрын
Saved my butt! Thank you so much
@arminrc
8 ай бұрын
You are welcome! Always to the rescue! 😃
@bryancoughlin3621
8 ай бұрын
Thanks so much!
@arminrc
8 ай бұрын
You are welcome! Thanks for watching and the comment!
@lotusz31
2 ай бұрын
Problem is that your turning the wrong way when going backward 🫣
Пікірлер: 17