This is exactly why I always liked working outdoor shows , unless it rained of course . Amazing presentation , many thanks !
@jobaecker9752
2 жыл бұрын
Astonishingly well presented information on a topic that probably gets overlooked. Well done.
@AudioUniversity
2 жыл бұрын
Thanks, Jo!
@Edward135i
2 жыл бұрын
I don't produce music or even play a instrument, but you videos have been invaluable in setting up my Home Theater right.
@valleywoodstudio7345
2 жыл бұрын
Excellent, thank you - and important to point out that the middle and 1/4 points are inadvisable as listening points too! Wes Lachot's 38% rule for listening position is a useful guidline.
@AudioUniversity
2 жыл бұрын
Thanks, Valley Wood Studio!
@yigitboylu8543
Жыл бұрын
But every location is a 1/4 point of one specific frequency ?
@VKHSD
2 жыл бұрын
this is definitely the best channel ive found to learn acoustics.
@AudioUniversity
2 жыл бұрын
Thanks, Horror Wagen! Glad you’re enjoying the videos.
@parithrush7921
2 жыл бұрын
The 80 hz demonstration at the beginning clarified the issue.
@AudioUniversity
2 жыл бұрын
Glad to hear that! Thanks for watching.
@davidkulmaczewski4911
2 жыл бұрын
Weird.... I couldn't hear any difference.
@rupe82
2 жыл бұрын
I knew what room nodes were but the demonstration you did was a perfect example. I'm in the process of trying to resolve a null I have at 50-70hz, if I move my desk about 2ft to the left the null goes away but then I get a null at 100-120hz. It's like fighting a losing battle.
@leaveitorsinkit242
2 жыл бұрын
Just use a speaker calibration EQ in your listening position.
@Nightowl427272
2 жыл бұрын
@@leaveitorsinkit242 - That doesn’t work for nodes. It’s literally the entire point of this video. Nodes care canceled-out frequencies so it doesn’t matter how much you turn up (compensate with EQ).
@leaveitorsinkit242
2 жыл бұрын
@@Nightowl427272 Nothing nulls perfectly in the real world so if you have a sizeable dip at 100hz (or whatever frequency) just boost it.
@Nightowl427272
2 жыл бұрын
@@leaveitorsinkit242 - Really. So it’s that simple huh? Gee, why didn’t the rest of us think of that? Ok dude…you just keep on a doin’ you. Lol
@leaveitorsinkit242
2 жыл бұрын
@@Nightowl427272People stick to mockery when they don’t have a valid counterargument to make…
@Drinkyoghurt
2 жыл бұрын
Thanks for the explanation. I was wondering why when I stepped out onto my balcony I could clearly and loudly hear the bass notes, but when I got into my room I could barely hear a thing and it sounded relatively quiet. I knew bass waves were long, just didn't really realize how long they actually were.
@prospersrofenyoh1787
2 жыл бұрын
My goodness, your teaching and tutorial are very understandable..God bless you so from
@AudioUniversity
2 жыл бұрын
Glad to help! Thanks for watching.
@ClintMoody
2 жыл бұрын
Fantastic presentation. My only critique is that you mention Helmholtz resonators, but not membrane-based trapping, which are so much more accessible than resonators. Otherwise, flawless presentation.
@mysock351C
2 жыл бұрын
We should not lose sight of PEQ and measurements, too. Taking measurements is a very effective way to evaluate the effectiveness of your room treatment regimen, and can also help guide on what needs addressing next. Additionally, once you have gotten the room optimized, the application of PEQ will help alleviate any remaining modes that could not be addressed by placement and treatment alone. But that is probably a whole new video in its own right since its not simply a matter of just "make it flat" due to limitations of speakers, amplifiers, etc. and requires some thought on what corrections should or should not be applied.
@Oneness100
Жыл бұрын
One way to conduct measurements with low frequency problems is put a low frequency signal starting at 20hz or 30hz and then map out your pressure zones. You set the volume at 85dB at the listening position, and then go around the room starting in the corner and measure about every 2 feet around the room, constantly increasing the frequency by about 5hz to 10hz. You may have coincidental modes within 5hz that are along 4 surfaces, especially if 2 or more dimensions are the same or relatively close to the same distance. Here's a video that discusses these problems. kzitem.info/news/bejne/soRu3ZaMa5Wnlo4
@hmtp177
2 жыл бұрын
Thanks, now my life is a bigger nightmare than I tought... Awesome vid as always though
@howir0n1c2
Жыл бұрын
This video should be a required watch for anyone setting up a home studio/theater!
@morejelloplease
2 жыл бұрын
This makes me want to ditch my mcintosh , magnepans and subs and get headphones.
@AudioUniversity
2 жыл бұрын
I wouldn’t go that far! But I see what you’re saying! Thanks for watching.
@doublet147
2 жыл бұрын
I call dibs!
@morejelloplease
2 жыл бұрын
@@doublet147 I have some videos on my channel of my audio junk :)
@JoeJ-8282
6 ай бұрын
I would Love to have that speaker and amp combo! I'll take them off your hands if you TRULY want to get rid of them, lol! But in all seriousness, you can literally drive yourself nuts trying to "sound treat" your room to eliminate ALL of its problems and resonance nodes, and I've tried so much over the decades that I've finally just all but given up on ever having a "perfect" listening room, because you really CAN'T, so instead of driving yourself crazy and spending so much time on that, just do the basics, of at least a good speaker placement and setup, and have a rather "soft" room like with carpet and basic wall treatments for early reflection reduction, and then have multiple subs in different locations throughout the room to even out the bass, and try NOT to have a "hard" room with lots of tile, etc., and then just don't nitpick the rest, instead just sit back in the sweet spot, relax, and actually enjoy your system and actually listen to your preferred music and let it bring happiness and joy into your life, instead of fretting about perfection, because there's no such thing anyway!
@leandrobremer-music
2 жыл бұрын
I had so many problems caused because of the acoustics of my rain that I have switched to mixing only in headphones. It was the best simplest choice :)
@theeviljames
10 ай бұрын
Excellent! I don't currently have an application for this knowledge, but one of my favourite things is the discovery of a well-presented and well-written resource that I can file away for future use.
@vewilli
Жыл бұрын
What an acoustics expert. Far beyond my knowledge and understanding…
@iericnierman
Жыл бұрын
Wow. You got a subscriber with this one. Incredibly useful details.
@AudioUniversity
Жыл бұрын
Welcome aboard, Eric! Thanks!
@envisiotube
2 жыл бұрын
Great visualisation! You forgot to mention one of the best ways to treat low frequency modes: the double bass array with 4 subwoofers. Done correctly, the mirrored subs on the rear cealing absorbe the sound waves of the two front subs in a way that the back ceiling nearly disappears acoustically. Of course this addresse not every mode problem but one of the most annoying.
@msquaredsciencehistory
2 жыл бұрын
I've recently been playing with a chladni plate and learning about 3d harmonics and this video really nicely summed up so much stuff i've been trying to wrap my head around, great video!
@AudioUniversity
2 жыл бұрын
Glad to help! This video may be helpful too: kzitem.info/news/bejne/qIKk2K2pimN2pZw
@mb3799
Жыл бұрын
Dan Russell is the man! So happy you referenced his work.
@bootysmaka22
Жыл бұрын
Up till recently, I thought my bandmate had bought some crappy used studio monitors with no bass and distortion at low volumes, and was pretty sure one had a bad driver. I took them home to investigate the bad driver (indeed one is bad) and then took over a pair of my great-sounding studio monitors for the next practice...much to my surprise, my great-sounding monitors now sounded terrible and were lacking the great low-end response I was used to at home. Now I know there are some serious issues with the room, I was able to make it a bit better by changing speaker placement, but still, if I stand off to the side of the listening position the bass returns, so now it's time for some room treatments! Good info!
@Tarnith
Жыл бұрын
Great video and some fantastic demonstrations of what's going on with small room acoustics! One thing to note with the 30hz and 60hz longitudinal spring vizualization: You're most likely seeing temporal aliasing (and in this case locking in as you've synchronized the camera framerate and the object being sampled) not an actual modal relationship. Remember nyquist! To sample function of the system accurately you need at 2x the highest frequency of that system. While this visually works, if you were trying to measure the actual modal relationships in that spring the highest you could accurately represent would be 15hz (assuming your camera is shooting at 30fps) This is also why 60hz locks in, it's a clean doubling of 30hz. An extra layer of fun with cameras is also how the shutter/exposure time will affect the sample data (averaging)
@AudioUniversity
Жыл бұрын
Great point, Tarnith! I didn’t think of that until you pointed it out. Kinda cool, actually.
@artysanmobile
2 жыл бұрын
Small spaces suffer worst from modes. That may seem counterintuitive but it’s true. A large space allows many more modes, which is good. The more, the better, not least because they will be smaller in amplitude. There are room dimension relationships that are ‘golden’ for modes. They require the least treatment and mics will work to their full potential in them. Drums will have a full voice and Rt will be well contained at every frequency. I built such a room out of rough concrete block and it just has to be heard to believe it. A live performance mecca.
@Oneness100
Жыл бұрын
When you use Amroc, expand the dimensions window and then you can select Axial, Tangential and Oblique modes individually. The Axial Modes are the biggest and hardest to treat and they are along the entire surface Front/Rear, Side walls and even ceiling. The Ceiling's of 7ft to 9ft have problems in the 60hz to around 75hz and they usually need about 6 to 7 inch deep absorption. They usually require more pressure based absorption, above 100hz, using velocity based absorption is more appropriate because those are reflections vs modes. Get the bottom end fixed first. which means typically in the 30hz to 50hz range. That's the fundamental and the biggest problem. I'd start with speakers pulled away from the front wall and a good rule of thumb is pull them out about 3ft to 4ft. The corners is not where I'd put the low frequency absorption. Axial modes are unwanted pressure with 2 parallel surfaces, not the corners. I'd check out the Acoustic Field's products/design. they can either design the wall/ceiling construction to build the low frequency absorption into the wall construction, so then you only need to add diffusion and open cell foam for reflections. OR, you can buy or build your own low frequency absorption cabinets and line your walls with full range absorption. I would recommend dealing with the Axial modes first and start at the lowest frequency you have a problem with. Helmholtz don't work that well because they don't absorb as much as a diaphragmatic absorption cabinet. it's not JUST the frequency you have a problem with, it's the location of the problem and the amplitude or amount of that frequency you have to consider.
@kyleshays
Ай бұрын
Dude this blew my mind thanks!
@Peter_Mercier
2 жыл бұрын
This channel is brilliant! Thank you so much for sharing your incredible wealth of valuable knowledge with us. Thank you, my friend. 😊🙏🏻
@AudioUniversity
2 жыл бұрын
Glad to help, Peter! Thanks for watching.
@nb1223
2 жыл бұрын
Thank you, I appreciate your work.
@AudioUniversity
2 жыл бұрын
Thanks for watching and commenting, NB 122!
@johnmatthews1095
4 ай бұрын
Excellent presentation, well edited and concise
@AudioUniversity
4 ай бұрын
Glad you liked it! Thank you.
@LucasLemonholm-wo6eo
4 ай бұрын
Thank you! A complicated topic addressed thoughtfully and thoroughly 🙏
@andrwwaugh
2 жыл бұрын
That was such a simple and effective way to demonstrate that phenomenon Good work
@AudioUniversity
2 жыл бұрын
Thanks!
@OrangeMicMusic
2 жыл бұрын
Super good info and great channel :) For small rooms someone can try this : -Pretty good acoustic treatment paired with Sonarworks (or other hardware/software solutions if the budget allows) it's the best solution for working 80% on a mix. -In the end, using headphones for "fine tuning" the mix It's working for me 😊
@shawnebrown
2 жыл бұрын
You make the complicated topics understandable.
@EdThorne
Жыл бұрын
Absolutely brilliant video, Kyle! I’m so in awe of your information and delivery! 👌🔥
@AudioUniversity
Жыл бұрын
Thanks, Ed!
@joho-z
Жыл бұрын
This is the second video from you that I've learned so much. I subscribed as a result. Thx
@AudioUniversity
Жыл бұрын
Glad to help! Thanks for subscribing.
@raf.raf.
2 жыл бұрын
I have very little interest on this topic (I don't record audio and if I did quality would probably be low on the priorities list). Basically, I clicked because I thought it would be fun to see the spring moving, which it was, but the whole video was interesting. You explained everything very well!
@leonsaieg2959
Жыл бұрын
But this is not for just recording, its for mixing and producing also
@ChadAV69
9 ай бұрын
A good way to solve sub 80hz mode problems is using two subwoofers. One on each side of a null. One sub in front left corner and one sub in back right corner will do very well in evening out the bass response because it’s helping the length and width modes
@patriciaoudart1508
2 жыл бұрын
I saw yesterday a studio where speakers were at the corner up to the ceiling at 45 grades down to ground. However, great explanations you've done! I don't know if this is useful, my project is in a tiny wood house building my music studio, two meters for two meters, with six keyboards, computers and racks, my speakers will be in high position directed to my head, on the two adjacent walls where my keyboards are, so 45grades in all directions, so the reflected sound will be a little room delay, not a deal. For Working I best uses Headphones.
@AudioUniversity
2 жыл бұрын
Thanks, Patricia!
@jamestheradioman
Жыл бұрын
I gotta watch this again because it went over my head a bit. I need the simplified edition.
@vadimmartynyuk
2 жыл бұрын
Great Info. This is what I’m often try to explain to other producers / musicians.
@macronencer
Жыл бұрын
This is a hot topic for me. I've set up a small home studio in an upstairs room of an old farmhouse, and it's beneath a slate roof. in front of me, beyond my speakers, is a sloping ceiling broken in the middle by a dormer window; behind me is just a sloping ceiling but there is gear beneath it. To my left is a flat wall but my keyboard stand is in front of it; to my right is the entrance door. I also have weird shapes in the corners where the sloping ceilings meet the walls at a height of around 73cm. Geometrically, it's a mess - I'm not sure any node calculators could handle it. When I set the place up I was kind of hoping that having a shape that wasn't a cuboid box would help prevent issues, but so far I'm unsure whether that's true. I think I've already noticed some nodes! It's quite a challenge...
@xx1simon1xx
7 ай бұрын
The best way to deal with modes under 100 hz is a multi subwoofer array. Its going to be much less expensive and actually much more practical than potentialy huge resonators and absorbers. 4 matched small subwoofers in all 4 corners of the room will almost always be a significant improvement, even without any perfect matching and EQing.
@deltazed7572
4 ай бұрын
thank you so much ❤ you help me alot
@TheFilletingfish
Жыл бұрын
Thank you for explanation of room modes.
@mrsampaiothiago
4 ай бұрын
great video!
@jenniferlaynemusic
Жыл бұрын
Pulls out a transducer... Brilliant.
@gibson2623
Жыл бұрын
Absolutely brilliant, Kyle. Thanks :)
@AudioUniversity
Жыл бұрын
Thanks, Gib Son!
@gibson2623
Жыл бұрын
@@AudioUniversity ❤
@dewaadrian
2 жыл бұрын
as always, best explanation with super great visualization. big thanks, Kyle. 👍👍
@AudioUniversity
2 жыл бұрын
I’m glad you enjoyed this one, Dewa! Thank you.
@dewaadrian
2 жыл бұрын
@@AudioUniversity my pleasure
@-andymel
Жыл бұрын
I absolutely love your examples! Thanks for using my calculator :)
@AudioUniversity
Жыл бұрын
Thanks, Andreas! The calculator is an amazing tool - much appreciated!
@kadiummusic
3 ай бұрын
Bass hunter technique (Acoustics Insider KZitem Channel) to find the optimum listening position, phantom image technique to place your speakers, then treatment and finally finish with ARC 4. My small mixing room sounds great. 😎
@jayantjrathod
2 жыл бұрын
Awesome Video Sirjee Thanks For The Great Information
@AudioUniversity
2 жыл бұрын
Thanks for watching!
@jkgrooves
2 жыл бұрын
Very well produced video. I appreciate your hard work. However I would make the argument that it's not your mixing room that is important at all. It's the playback system and room. Peace
@leaveitorsinkit242
2 жыл бұрын
Why not just calibrate your speakers in one position and one position only? As long you have a flat response in your listening position… who cares if there is a buildup or null somewhere else?
@fattommy4436
2 жыл бұрын
Because nulls aren’t impacted by calibration - it’s not a dip in volume, it’s a complete cancellation.
@leaveitorsinkit242
2 жыл бұрын
@@fattommy4436 Nothing nulls perfectly in real-life.
@KC-bi9jw
Ай бұрын
lol “I built a studio but only one person at a time can be in there” 😂😂😂
@KC-bi9jw
Ай бұрын
Client: “It sounds weird” Me: “Nah, just come here and sit in my lap”
@miguelclare7999
8 ай бұрын
Good presentation! Thank you for making me aware of room modes. How do I determine where to position my speakers according to the shape of my room?
@doublet147
2 жыл бұрын
very well explained
@AudioUniversity
2 жыл бұрын
Thanks, double T!
@envy9536
2 жыл бұрын
I learned last week by a ingénieur , beds absord a lot of frequiences - so dont remove them from your bedrooms/home studios it helps a lot - especially in low frequencies !! I had to share this hope it helps 😤😤
@AudioUniversity
2 жыл бұрын
Thanks, E N V Y!
@grmblfzzzt
2 жыл бұрын
I have thought about a couch in my music room but rejected the idea because the room is not so big. Now I'm toying with the idea of putting in a couch and filling the body with rockwool.
@fattommy4436
2 жыл бұрын
@@grmblfzzzt that is actually a brilliant idea 😂 I’ve got a heap of insulation left over from building absorbers and it’s currently just stored in the air gaps behind my panels. I’m going to stuff my couch lol
@sagi_tech_n_stuff
7 ай бұрын
That was such a great video and explanation! 🎉
@alejandrocastellondorta4581
2 жыл бұрын
Great explanation!!!
@AudioUniversity
2 жыл бұрын
Thanks, Alejandro!
@ndavies8
2 жыл бұрын
I would have paid for this information
@atzoulis1
6 ай бұрын
Hi, very nice video. I have a more theoretical question regarding pressure based absorbers like membranes or Helmholtz resonators. The term resonance means also in some context amplification. In all the textbooks I have read it is stated that if sound is produced at the natural frequency of the resonator, this sound is being absorbed by the resonators. My question (it may also be stupid) is why do these membranes or Helmholtz resonators absorb these frequencies and do not amplify them. I have also seen some answers which have to do with the fact that the original sound and the reflection from the resonator are out of phase and therefore cancel each other but i am not really persuaded. I find this a bit difficult that every wave is out of phase with the reflected sound. Have you ever thought about it or do you have an answer regarding this issue?
@immersivenarrative
2 жыл бұрын
Is it safe to say it’s that it’s too complicated to do in a decent way without experience… ?Because that’s how I feel about it after having a home studio for a couple years and watching videos like these trying to make it better by myself… what I kinda settled on as for tips is : knowing your room is more important than it being perfectly treated (using also the usual monitor/“listening place” positioning tips) (and moving blanket on walls)
@zachshoupnotshoop7374
9 ай бұрын
Phenomenal video bro!
@gonecoyote
2 жыл бұрын
very interesting. thank you
@AudioUniversity
2 жыл бұрын
Thanks for watching!
@Migesteban
2 жыл бұрын
Este video fue excelente ! :)
@AudioUniversity
2 жыл бұрын
Thanks, Migue!
@justinn9769
Жыл бұрын
Awesome!
@hamricmike8
Жыл бұрын
Welp, I'm about to set up my home studio in a 10 x 11 bedroom. My acoustic treatment is going to be hanging blankets all over the walls because I'm broke as hell.
@Dave-Rough-Diamond-Dunn
Жыл бұрын
Our local Op-Shop has bins full of blankets, quilts, pillows and cushions designated as 'dog bedding'. They're washed, but perhaps stained, or had pet hair remaining after washing. They're very cheap, so I've been using a lot of things from the bins as acoustic treatment. Feather/down filled quilts and pillows seem to work particularly well, I packed my homemade treatment panels with them, and in some cases, especially with cushions and pillows in the corners, have just stapled them directly to the plasterboard and ceiling. Staple holes will fill with paint btw, no special prep required, the landlord knows this, so is not concerned at all. You wouldn't believe the difference it's made for a few dollars here and there, I can't believe how quietly I can have the speakers and still have great clarity. As you saw, thickness is an issue, the thicker the treatment, the lower the frequency it can help with, so think about pillows and cushions, not just blankets. 🙂
@EricIversonMixing
4 ай бұрын
Hey Kyle, do you have any videos detailing how to determine speaker placement?
@AudioUniversity
4 ай бұрын
These might help: kzitem.info/news/bejne/1WZoq6CfkZipfqQsi=yDVcHXTnOxJ0tS_u kzitem.info/news/bejne/uX9mr4WugGupgm0si=KyVeSWz8C5zwwCp5
@aaax9410
2 жыл бұрын
Useful information cheers
@AudioUniversity
2 жыл бұрын
Glad to help! Thanks for watching!
@FlashRecordsStudios
Жыл бұрын
Great explanation!
@SHOCMUSIC
Жыл бұрын
Can somebody help me interprete the outcomes of the room mode calculator? I'm struggling with choosing the right room for months now, the one is a mit smaller and more square, the other one more like a cuboid. It says that the cuboid one has a lower Schroederfrequency, but the more square one lies more in the bolt area. I don't know what to do :'( (if somebody really wants to help me, here are the exact room dimensions: Cuboid: 5,30m x 3,30m x 2,53m (L x W x H), and the more square one: 3,90m x 3,30m x 2,53m (L x B x H)
@jeremythornton433
Жыл бұрын
Thank you for this. I have to move and sadly, my little studio is only going to be 10 by 12 feet with a 6 foot high ceiling. It's either that or not have a room to record in.
@fieldacoustics
Жыл бұрын
多謝!
@AudioUniversity
Жыл бұрын
Thanks for supporting Audio University, fieldacoustics!
@OpticIlluzhion
2 жыл бұрын
Yeahhh I'm sticking with my headphones thanks
@ntonioproductions1591
Жыл бұрын
I've been watching your videos on how to setup a home studio and man, it's so much work! My question is: what the fuck should we do 😂 I'm so lost in so many variables that can affect a home studio that I don't even know what to do anymore
@post-man23
2 жыл бұрын
Nice one. Thanks!
@AudioUniversity
2 жыл бұрын
Thank you for watching!
@teashea1
Жыл бұрын
verdy well done
@yigitboylu8543
Жыл бұрын
Even if we use a basstrap we won't be using enough thickness for low end, so is pressure based traps only solution ?
@AudioUniversity
Жыл бұрын
Practically speaking, yes. Velocity absorbers aren’t ideal for low end control. But they can help from about 125 and up and are much less costly.
@ashuleestinesimtitrau
2 жыл бұрын
Mixing and producing in small rooms is depressing tbh. I can't afford a separate studio and the way my apartment's living room sounds kills both my productivity and creativity. I have 2 bass traps stacked in each corner next to my setup but it ain't helping much. Such is life.
@sanctionedforce1868
Жыл бұрын
so, question, does audio from headphones or earphones reduce this problem since there are fewer surfaces to interact with before the waves hit your eardrum?
@AudioUniversity
Жыл бұрын
Yes! Check out this video for more info: kzitem.info/news/bejne/xpmYu4iosWZirYo
@sanctionedforce1868
Жыл бұрын
@@AudioUniversity cool, thanks!
@asaphessiene4272
Жыл бұрын
awesome..you're damn good😁
@JeffoftheShout
Жыл бұрын
Are you familiar with, “Trinnov?” If so, what are your thoughts?
@BritishBeachcomber
Жыл бұрын
Abbey Road Studio One - The World's Largest Recording Space. Perfect sound.
@clivekingco1865
2 жыл бұрын
has anyone ever co up with such a good lody, and forget it seconds later
@dontworry2371
2 жыл бұрын
Can we make acoustic bass traps diy so what matterials are good for making it
@AudioUniversity
2 жыл бұрын
I’m sure it can be done. I have not made one before though.
@vooveks
Жыл бұрын
There’s loads of info on the internet about building them. It’s basically a wood frame covered in acoustically transparent cloth, with Rockwool (insulating) slab built in. The deeper/bigger the better, but the trouble is, they take up a lot of space, so it’s a compromise if you have a small room.
@Arthur_My_Dear
7 ай бұрын
Is there somewhere I can send a diagram and photo of my studio space to ask you a couple of questions on? Thanks
@AudioUniversity
7 ай бұрын
I’m planning to open up a community soon. That will be a place to post and ask questions from me and other community members!
@Arthur_My_Dear
7 ай бұрын
@@AudioUniversityFantastic, look forward to that 😊
@undercrownhiphop9422
Жыл бұрын
So with the amroc calculator, the colored room mode areas are not where you would have to be to hear the issues, but where treatment would need to go to tame them?
@AudioUniversity
Жыл бұрын
I believe those colors correspond to areas of maximum pressure and maximum velocity. Different types of acoustic treatment are used for each.
@systemicchaos3921
8 ай бұрын
My D bass notes are so much louder. Not sure how to remove
@BoHunter2010
Жыл бұрын
Well done. +1 subscriber.
@daa2622
2 жыл бұрын
that guitar in the back is really cool what is that?
@AudioUniversity
2 жыл бұрын
Thanks! I believe it’s a Silvertone 1348.
@VERYVANITA
8 ай бұрын
Hi what is the device you are using to " hear " the tones at the start of the video .?
@ELSSAUDIOELECTRONICS
2 жыл бұрын
thanks kyle,for the usefull demonstration. i have some some question about my mgp mixer,what is the use of 100hz switch in all of the channels?is this a low cut?thank you
@AudioUniversity
2 жыл бұрын
Yes. This is a low cut switch.
@ELSSAUDIOELECTRONICS
2 жыл бұрын
@@AudioUniversity thank you very much kyle,im a newbie in this equipment😇
@richarddavis5542
Жыл бұрын
It is clear how modes affect playback and mixing, but what about recording. Shouldn't you treat your recorded instrument (drum kit) like a speaker and your microphone like the listening position (ears)? Or has this been discussed in another video? Based on room dimensions doesn't it make sense to locate the source and the mics in such a way that room modes are lessoned?
@justinbeamon6624
Жыл бұрын
The drums are so close to the microphone there's no chance for waves and nodes to be a factor. Room mics sure, those you have to play with but nothing close mic'd is affected. Overheads are capturing mainly mids and highs and rarely any low end so that's not much of an issue.
@socialmeaslesinpartnership1252
9 ай бұрын
Close mic your guitar amp with tons of gain and do squealies. It really won't matter at all, some people will buy it. You can even do it living right next to an airport, neighbours' dogs etc.
@mrpablodelosmarbles7966
14 күн бұрын
Just use headphones
@karlplaysdrums
2 жыл бұрын
Sounds like (pun intended) a room's nodes can be konkulated based on room dimensia.... yes? ..
@AudioUniversity
2 жыл бұрын
Yes! Although the construction and materials have a small impact as well.
@mirothedjplaylist
8 ай бұрын
So I got a Yamaha amp that automates all your frequency's to a listening point of your choice worth the 300$
@iluniev
2 жыл бұрын
cool
@AudioUniversity
2 жыл бұрын
Thanks for watching!
@djmarybaloo
2 жыл бұрын
👏
@AudioUniversity
2 жыл бұрын
Thanks for watching!
@larrypatterson2340
2 жыл бұрын
I understand the basics of stereo and the basics of quad sound but the human ears either you going to get it fully from the front or a little bit lesser sound directly from your rearand so my point is to Sweet Spot is going to be only in one place in that room naturally according to the structure and how the speakers are located, show me an equation and I'm happy.
@xyzct
Жыл бұрын
Fun fact that you probably know but never really articulated: Everything that vibrates plays a major chord! Every _note_ is a chord!!
@christiaanVS
2 жыл бұрын
Hey , where did you learn al of this ? What university or course ?
@AudioUniversity
2 жыл бұрын
I studied Audio Production at Webster University in St. Louis.
@christiaanVS
2 жыл бұрын
@@AudioUniversity ahh okay thanks ! Is there a big difference between sound engineer and audio production? I want to study that next year
@AudioUniversity
2 жыл бұрын
There are many fields of study under the umbrella of Audio Engineering. Sound Production, Research, Design, Mixing, and many more!
@christiaanVS
2 жыл бұрын
@@AudioUniversity Okay so if I decide to study sound engineering has a lot more to offer than audio production? Okay thanks !
@christiaanVS
2 жыл бұрын
@@AudioUniversity i feel like I have so many questions to ask you about studying it and so on🙈
Пікірлер: 198