the mixpre6II is one of the most amazing piece of engineering i ve invested in. plus the support before i even bought one was outstanding. this little device is a revolution on set and in my studio, it basically became the center piece of everything. great job, sound devices!
@Finsterwald_
Жыл бұрын
Thanks a lot for the video. I still find this tutorial a little confusing at some points. I wished you had more examples to describe the functions more easily.
@kosmikmusa
7 жыл бұрын
Very nice. Is it possible to monitor MS mic setup as stereo and record raw MS to individual tracks?
@felipeeufrazio1044
2 жыл бұрын
In Advanced Mode, the MixPre-6 is configured as a eight-channel recorder with user-selectable 44.1, 48, 96 and 192 kHz sample rate and 16 and 24bit depth. The LR mix tracks may be recorded as well as each of the six channels as individual isolated (ISO) tracks. Audio for the ISO tracks is recorded “prefade” meaning before the channel knob gain, so any changes that are made there will only affect the LR mix and have no affect on the recorded ISO track levels. This is particularly useful for post-production audio processing where it may be desirable to create an alternate mix of the tracks at a later stage. Information from user guide
@ronfya
7 жыл бұрын
Hey guys, great info ! Thanks for that. One question though. Say you're on set recording audio for a movie. Is it possible to enter scene/shot/take numbers as iXML metadata as you go so that it is readable directly upon import by Final Cut Pro X ? Thanks !
@seanwebb605
3 жыл бұрын
I knew that it was a compact unit, but I wasn't prepared for how tiny the unit is.
@felipeeufrazio1044
2 жыл бұрын
Is too bad for a set ?
@seanwebb605
2 жыл бұрын
@@felipeeufrazio1044 It looks rather silly. And it can be difficult to use the touch screen. But the quality has been fantastic. I'm getting use to it.
@NashuaETV
7 жыл бұрын
Thanks for the videos. Any idea if I can opt not to send an audio channel to the stereo mix, but still record that channel in ISO? I would like to use this for recording our sports announcers on Channels 1 and 2 and send those only to the headphones and the audio out port for backup recording on the camera. I would use the third (or 4th) channel to record the stadium announcer so that later I can mix that track in when needed in editing. My announcers don't like the stadium feed in their headphones and I would also prefer it is not on my backup recording in the camera. The videos on the MixPre series I have watched today don't address this issue. If anyone knows, please reply. Thanks!
@cubul32
Жыл бұрын
Is solo the same as PFL on a mixer?
@JuusoHoo
4 жыл бұрын
thanks! how does the Mid Side work?does it give instant MS stereo on the mode live/recording or need processing of the Side track later? Mean do I get a full MS stereo at once?
@jays4778
Жыл бұрын
Hi Chris! Why is there 3 Tracks(L,R and Ch1) when I record a boom on Ch1? What is the meaning of L, R additionally with Ch1? My setup is just one MKH416 connected to CH1 on MixPre3 and I am trying to record talking head.. Is there any additional benefit in quality of audio output or editing workflow if I use all 3 (L,R and Ch1) in final Video? Is it OK to record on Ch1 without the L and R? Should I just get rid of L and R? Is L and R really required for single Mic setup? What is the purpose of L and R?
@davidf1985
Жыл бұрын
I have the Mixpre 6 with firmware version 8.0. For recording in Advanced Mode, press Ch 1 knob and I can change the Gain level. If I go to Menu > Record , I have Left Gain and Right Gain. What is the difference between Channel gain and Left/ Right gain ?
@TheAstrologyPodcast
2 жыл бұрын
Noooo.. you skipped over the outputs menu
@echoexist
7 жыл бұрын
Is there a way to switch from controlling the faders with the four knobs to controlling the gain of each channel in advanced mode? I need easy access to gain.
@voodoohumb
7 жыл бұрын
This is the deal-changer for me also! Curtis Judd wrote in the comments of his overview (kzitem.info/news/bejne/rpmNmIWnj5pinYI&lc=z12sxzz5cqrsfzbrr04cc1digvf1t3ajleo.1496030389195707) "If you switch to *custom mode* you can use the *knobs as gain trim* ." if this is true, these is my device i was waiting long time for :-)
@kipling1957
7 жыл бұрын
The video discusses stereo ( 2Ch.) recording scenarios. Just a technical question: What kind of output wav file do you get if say you wanted to record more than 2 inputs? Like for instance all 4 mic inputs on the MixPre 6 as individual channels (or ISOs, to use the misnomer)? Is there such a thing as a 4 ch. wav file, or do you end up with 4 mono wav files? Thanks.
@kipling1957
7 жыл бұрын
The answer to my own question: You get a poly (multitrack) wav file. This can be split into mono tracks using free SW from SD. This may be needed if you are a FCPX user which only has a limited capability handling this type of file.
@xxHouseInMotionxx
3 жыл бұрын
@@kipling1957 does this have to be pre-specified in advanced mode?
@kipling1957
3 жыл бұрын
@@xxHouseInMotionxx I don't actually know regarding the MixPre. I eventually went with a Sound Devices 633 as it suited my needs better. This records to poly wav files by default. My guess is the MixPre would do the same.
@gabrielspalletta
6 жыл бұрын
How can i record every channel in different .wav?
@cemski
4 жыл бұрын
Did you get a solution?
@xxHouseInMotionxx
3 жыл бұрын
I posed this on their website and waiting for a response... its quite a bit of a problem for me since I want to be able to use a shotgun mic and a stereo pair at the same time and be able to control their levels post mix... seems like ch 1-4 is all mixed down to 2 channels. So essentially my recordings were trash pretty much with a bland stereo image when a stereo lab pair and a shotgun. Dragged it into reaper and it showed 2 channels only... I saw and heard channel 3 in the headphones and on the monitor... so did this just get mixed down into 1 file????
@vyoufinder
4 жыл бұрын
For the options at 5:40 what are the left and right? Left and right channels from something I assume, but what?
@sounddev
4 жыл бұрын
All channels feed into the Left and Right stereo mix based on your panning.
@oliverleslie7382
4 жыл бұрын
Hi, how do i erase a track i just recorded? I see something that says "trash" - but it still is there once i press it. Thanks Mixpre-3 ii
@josephsardone8971
3 жыл бұрын
YES! That is a GREAT question ... I too would love to hear the answer. :)
@realmalteherwig
3 жыл бұрын
can i use the mixpre 3 Ii to record iphone calls via usb-c?
@kipling1957
7 жыл бұрын
Apparently, those physical pot trims do not record to ISO tracks, which makes them redundant if you are only interested ISOs, not the L/R mix. You have to go into the touch screen submenu to set each gain and that's the level recorded, not the sum of the trim and the gain. Apparently, you can use the custom menu to set the trim knobs to adjust the entire gain sweep - but that is a HUGE range. Why can't they just sum the two gains stages in advanced mode to record ISOs (or have that option)? That is what most recordists would want. All this is a hassle and a deal-breaker for me.
@jarritwaters9724
Жыл бұрын
Yeah essentially the knobs are same as post fader. Like the faders on a mixing desk, to set the the actual gain you have to use the touchscreen, it is a bit of a pain in the ass! The preamp quality is very good tho. And it's a bit tricky to set up with a computer. So if you want to use it as an interface It would be better to use good quality interface at a similar price point. But if you want it for standalone on the road use, then the quality of the pres are very good. Albeit the small headphone jack, small line out, and no line-ins. Can work around it but is not ideal. I mainly got it for high quality recording on the road.
@jarritwaters9724
Жыл бұрын
Wait sorry I think you were talking about something different than what I thought. My mistake lol
@ahfimiwonawun
2 жыл бұрын
How do you record in mono?
@ToysintheStatic
3 жыл бұрын
I have a mixpre3ii and was wondering- if I’m running my main mixer xlr out into 1 and 2 (L and R) and I pan them accordingly- is this an ok solution for a stereo in? I noticed that when I change the option from mic to line it’s muted- is this because line isn’t an option on the 3?
@sounddev
3 жыл бұрын
It sounds like you are capturing a board feed? Running stereo and panning should be fine. When you switch to Line is the Mute icon glowing or is it just not passing signal?
@patrickjmckenna
6 жыл бұрын
Does this device have "pad" for sensitive mics?
@beepasmr2461
3 жыл бұрын
How to record left and right on 2 mics ?? When i put filme to resolv i got 1 filme like mono....??
@sounddev
3 жыл бұрын
The MixPre records polyphonic wav files. Check out this video! kzitem.info/news/bejne/r6pqyXWYm5eYo2k
@ignatius_guitar7452
2 жыл бұрын
Hi guys, great video! But I cannot figure out the difference between L&R linked and L&R (separate) in the record menu. Where is the difference? How does this affect the output file? Thank you very much and best wishes, Gert
@sounddev
2 жыл бұрын
Hi! When L & R are not linked, you can set separate levels for L and R. If they are linked, levels are the same for both tracks.
@ignatius_guitar7452
2 жыл бұрын
@@sounddev Thank you for the fast answer! Is anything affected in the output file like panning e.g.?
@directed_by_steve
4 жыл бұрын
Question. Im in advance mode and when Im recording it usually save to my flash drive for back up. It doesn't do that anymore. Is there a setting that I can just have it automatically backup the files in my flash drive again?
@sounddev
4 жыл бұрын
It should auto-copy when you stop recording. Is it not doing that?
@ThomsonVisuals
7 жыл бұрын
1:41 - to boldly go where no mixer recorder has gone before
@RolandoLora
7 жыл бұрын
ThomsonVisuals they are entering the prosumer market with a dropkick. And the ship shows that they do know the target :)
@ThomsonVisuals
7 жыл бұрын
A group of fearless rebels entering uncharted territory. I can dig it. Can't wait until mine comes in. 😎
@commercialand
5 жыл бұрын
is there a fast forward rewind function for playback
@sounddev
5 жыл бұрын
Yes! While in playback press and hold the toggle switch left or right to rew or fast forward!
@jrcruz85
4 жыл бұрын
where can i buy the stand you have the mix pre on?
@sounddev
4 жыл бұрын
www.bhphotovideo.com/c/product/1279823-REG/video_devices_pix_base.html/?ap=y&ap=y&smp=y&smp=y&lsft=BI%3A514&gclid=EAIaIQobChMIzOfS0KnK5wIVksDACh08iwNcEAQYASABEgLjoPD_BwE This is the PixBase stand
@insighteins1317
5 жыл бұрын
I have a MixPre-3 and would like to conect it via bluetooth to a Sony WH-1000XM3 headset. I found the "Bluetooth ON/OFF" switch in the menu but that is it. How can i pair them together???
@sounddev
5 жыл бұрын
The Bluetooth option on the MixPre is for connecting the Wingman app
@insighteins1317
5 жыл бұрын
Oh, i understand... Well, than the bluetooth function is useless for me.
@sounddev
5 жыл бұрын
@@insighteins1317Are you using the MixPre for location recording and trying to use wireless headphones or music creation?
@insighteins1317
5 жыл бұрын
@@sounddev I thought about using my wireless headphones as "monitors" but that´s not possible without the app and i don´t want to use any app. I just wanted to get rid of one cable. That´s it.
@wpkambiancesounds
7 жыл бұрын
Was supposed to be out by mid may according to B&H. When is supposed to get there? Im about to get something else lol
@sounddev
7 жыл бұрын
Our resellers have been taking MixPre Series pre-orders since April 19, and there has been a great response. Based on this response we do have a backorder and are working to fill all orders as fast as possible. We recommend talking to a reseller (of your choice) to make certain you are on their list and have units on order. Thanks for the note, and we appreciate your patience in advance!
@wpkambiancesounds
7 жыл бұрын
Sound Devices Ok, Thank you sir.
@comiteinvisible3703
4 жыл бұрын
Any chance there will be a a tutorial on custom mode any time soon?
@sounddev
4 жыл бұрын
Custom mode might be too "custom" to do a video on! To create a Custom mode preset, you'll simply toggle on which features you would like more advanced control over.
@comiteinvisible3703
4 жыл бұрын
thanks!@@sounddev
@sounddev
4 жыл бұрын
@@comiteinvisible3703 Our pleasure! Let us know how it goes!
@comiteinvisible3703
4 жыл бұрын
what a machine you built. I own a Nagra VII and frankly, I wish it wouldnt feel and look like a DIY-case in comparison to the build quality of the mixpre.
@sounddev
4 жыл бұрын
@@comiteinvisible3703 Thanks for the high praise! We try to build everything as robustly as possible!
@josephsardone8971
3 жыл бұрын
When I'm recording in basic, am I recording 32 bit raw?
@sounddev
3 жыл бұрын
In Basic Mode the bit depth is locked to 24.
@josephsardone8971
3 жыл бұрын
@@sounddev Thanks
@josephsardone8971
3 жыл бұрын
@@sounddev One quick question then .... In advance mode, how do I use one mic, in input one to deliver equal stereo sound to two channels ... try as I may ... I see it's in stereo mode, but visually only placing audio on one side of the stereo display ... I'd like to see it write on, & register on both sides of the display, like it does in basic. Thanks again, :)
@sounddev
3 жыл бұрын
@@josephsardone8971 What is your stereo source? It sounds like if it's a single mic you need to use a splitter to feed it to two channels.
@josephsardone8971
3 жыл бұрын
@@sounddev Thank you for following up! :) Ok, I'm currently using a shure Beta 58, which actually sounds great in the basic mode of this unit, and today, I picked up a quality splitter ... Any last minute helpful hints to keep this simple, and running at 32 bit raw?
@borntobarf
4 жыл бұрын
why the f don't I have an advanced mode on my mix pre 3 ????
@borntobarf
4 жыл бұрын
It's just not there, why????
@Wildmind
Жыл бұрын
I have the same question. There is no mode setting under system at all.
@MikeDuckworth
6 жыл бұрын
go solo... !
@1nevi
6 жыл бұрын
oh wow. bad sound in video for a sound recorder tutorial.
Пікірлер: 77