The MJX site has a V2 licensed Lancia body now, but I can't find them for sale yet. I love my 14302, but it seems to struggle off-road. The stock servo kept getting jammed to one side and the inside axle tends to drag in hard turns or donuts.. even after switching to 20k diff fluid. Keeping the dirt out of the steering helps, but that's a whole other thing. Maybe I'm just pushing it too hard 🤷♂ Yours seems to run fine!
@hyperc5249
6 ай бұрын
Sweet I love my lancia. I will have e to take a look at that. Try the dust guard. This is what I use. Raidenracing Chassis Dirt Dust... www.amazon.com/dp/B08QVK6GZ1?ref=ppx_pop_mob_ap_share
@scaleworksRC
6 ай бұрын
@@hyperc5249Oh thanks man! Added to wish list ..much better than the 1 time use panty hose trick😆
@kjetilpedersen583
6 ай бұрын
I looking after body I found it.Send you information where you can find them
@Glowingtomato
7 ай бұрын
Nice video! I have this on pre-order and can't wait. I did just get the 14209 and like it but do agree the throttle delay is annoying but thats an easy fix
@RinkaiKouen
7 ай бұрын
How do you fix that easily?
@Glowingtomato
7 ай бұрын
@@RinkaiKouen I have a Flysky transmitter that can hold multiple models so I'm just going to get and install a new receiver. I say easy because many cheaper cars have a combo esc/receiver so you would have to swap both.
@RinkaiKouen
7 ай бұрын
@@Glowingtomato Unfortuntely, it seems the throttle delay is an esc issue, not a transmitter/radio problem. On top od that, the esc is not programmable.
@ThePoolSharkWizard
5 ай бұрын
Thank you, is there a certain brand Philips head screwdriver you would recommend? I have MIP RC tools, but unfortunately, they do not make a Philips one.
@hyperc5249
5 ай бұрын
Kline tool. They make amazing tools for electronics.
@ThePoolSharkWizard
5 ай бұрын
@@hyperc5249 Thank you, Great Videos, keep up the amazing work!
@mrAcneface
4 ай бұрын
Which size of head did you get? I see 100mm and 80mm on offer.
@hyperc5249
4 ай бұрын
@mrAcneface I got the multiple head that has both and flat head too.
@bella0167
Ай бұрын
I just purchased one.👍
@Boogie_the_cat
Ай бұрын
So weird, why would you want "real" sponsorship logos on the car? That's literally free advertising (for the brands) that you, the customer are paying extra for. I understand paying for a licensed body. I don't understand wanting the Burma Shave logo on the car instead of the fictional Master Shave logo, especially not when that costs money to license.
@hyperc5249
Ай бұрын
I guess just for scale looks. They body is awesome. It's actually one of the less expensive MJX cars.
@whitmanft
23 күн бұрын
Which servo upgrade would u recommend? and where do u get the full dust cover?
@hyperc5249
14 күн бұрын
Dust cover is for the 1/16 Revo. Servo, you can use any micro servo.
@Neilo-gd1yq
7 ай бұрын
Nice video bro. Do you have the link for the dust cover you mentioned please?
@hyperc5249
7 ай бұрын
Thanks. Here you go. Raidenracing Chassis Dirt Dust Resist Guard Cover for 1/16 Mini Revo Summit Slash Rally a.co/d/h7Jp6HN
@albertprm21
Ай бұрын
When it was just unboxed, it was seen that the steering had toe-out. Does it need to be set to be symmetrical? or just leave it toe out?
@hyperc5249
Ай бұрын
Toe out. Toe in or symmetrical is for speed runs and drag racing. Toe out is for turning.
@albertprm21
Ай бұрын
@@hyperc5249thank you for explaining 🙏🏼
@marvinmaro1633
7 ай бұрын
Oh and your favorite one too drive? Hope you make en comparison video of the best MJX
@hyperc5249
7 ай бұрын
Great idea.
@martintrj5620
5 ай бұрын
I just got this one, I’ll pair ir with my flysky controller. Great review 👍👍
@hyperc5249
5 ай бұрын
Thanks. You can't go wrong with flysky.
@martintrj5620
5 ай бұрын
I got mine today, impressive rig. I do have a question, how on earth do you adjust the steering linkage? The front tires are facing outwards 😵
@hyperc5249
5 ай бұрын
@martintrj5620 you want toe out. It helps for cornering.
@martintrj5620
5 ай бұрын
@@hyperc5249got it! 👍. When the tires wear out, what would you recommend to replace them?
@hyperc5249
5 ай бұрын
@@martintrj5620 They same ones. These are some of the best tires.
@klebersilva751
3 ай бұрын
I have others mjx and they are ok, this one came with a longer throttle delay and a click on the trigger, I don´t know why becaushe the others models are ok with the same transmiter, but the car itself is amazing
@hyperc5249
3 ай бұрын
A new TX/RX will take care of that. It's definitely a good upgrade.
@Top-Jimmy
3 ай бұрын
Dumborc with a X6FG fixes it.
@vusalheydar
4 ай бұрын
Hi, thanks for the great video! I've ordered mine, just curious about one thing. I use DumboRC DDF-350 transmitter for my Bronco and would like to order DumboRC X6F receiver to use the same transmitter for MJX 14303 as well. Is gyro and receiver seperated in that model or I should order X6FG (with gyro)? I prefer to order X6FG because I will be able to adjust gyro through the transmitter. Could you please confirm if I will be able to remove the stock gyro and receiver easily?
@hyperc5249
4 ай бұрын
Gyro and RX are separate. You should be good to go.
@jopann88
5 ай бұрын
i just got the 16207 and i'm lovin' it! thinking of getting this one as well. when you did the 40mph speed test, was that running on the 2S battery?
@hyperc5249
5 ай бұрын
No 3S.
@jopann88
5 ай бұрын
@@hyperc5249 thanks! btw, what type of plug does the battery have?
@hyperc5249
5 ай бұрын
@@jopann88 Deans T plug.
@jopann88
5 ай бұрын
@@hyperc5249 great! thanks for the info!
@moraesmarcobsb
5 ай бұрын
Is The front toe adjustable? Has it plastic or metal spur gear?
@hyperc5249
5 ай бұрын
Yes, it is adjustable. It has a metal spur gear.
@moraesmarcobsb
5 ай бұрын
@@hyperc5249 thanks bro, I just ordered it , I from Brasil...I will race it on pavement, in principle. The toe in adjustment is preferred...
@CK4RC
5 ай бұрын
Man, phillips hardware drives me crazy. I'm sure it's a cost thing for the manufacturer, especially for budget rigs, but I think I'd rather pay a few more dollars and start out with hex hardware from the jump.
@hyperc5249
5 ай бұрын
💯
@hyperc5249
5 ай бұрын
💯
@Kingtsunami100
5 ай бұрын
Can you use the ESC from h14bm in this or the 14301? And if so would it be faster by pressing the power button 5x like bm? Or would I have to use the bm motor as well? Thanks for you insight in advance.
@hyperc5249
5 ай бұрын
They are the same setup. So, swapping it out wouldn't give you any gains.
@Kingtsunami100
5 ай бұрын
@@hyperc5249do you press the ESC button 5x like the bm on the 14303 too? I ordered one that comes today so the curiosity is killing me lol
@hyperc5249
5 ай бұрын
No. Not on these.
@Top-Jimmy
3 ай бұрын
It's a great car.. But its not the best WRC. If This was in a Genuine 1/7 Scale, rockin 6s, I'd agree with you. Even my HPI WR8 Flux is fully Sik, But it's not the best WRC RC car in the world. Thats a big call man.
@hyperc5249
3 ай бұрын
Best 14th scale Rally Car. Not large scale. I have 3 8th scale rally cars that are ridiculous. That statement has been taken out of context.
@Top-Jimmy
3 ай бұрын
@@hyperc5249 I havent taken anything out of context. The title quite clearly reads.. '' The World's Best WRC RC!’ '' How can someone who stumble across this video take that as something else?!? I read all the comments on most video's of interest and it really gets annoying as everytime someone objects to your statements, you get off ya bike and disagree with them and tell them they're wrong. But "" because you have been doing this such a long time "" You know everything. Let me assure you that you dont ok. Have you been into RC and electronics since 1976 ? I have. I live and breathe it and I ask questions when I don't know the answers. I certainly don't go around telling people I know more than they do. Humble yourself man...Maybe sometimes you are wrong, Who cares? Just be humble and admit it when you are. Take it easy.
@kjetilpedersen583
18 күн бұрын
I Can't find the link Dust cover to Mjx Hyper Go Cars 🙏 Please send it to me thanks for sharing this with Us 🙏 Nice video 😊
@hyperc5249
18 күн бұрын
Raidenracing Chassis Dirt Dust Resist Guard Cover for 1/16 Mini Revo Summit Slash Rally a.co/d/1KkkZbA
@kjetilpedersen583
15 күн бұрын
@@hyperc5249 thanks Rc Brother 😇🙏
@martintrj5620
2 күн бұрын
Any suggestion on a set of upgrade shocks?
@hyperc5249
2 күн бұрын
@martintrj5620 Hold tight. i have something to try out.
@martintrj5620
2 күн бұрын
@@hyperc5249 great, thanks. I noticed the stock ones are not very good. Please let me know when you find out 🙏. Thanks
@자유대한수호-i4c
5 ай бұрын
Your reviews are always accurate and give a lot of knowledge. Thanks to you, I buy good cars and have a fun hobby. Thank you always
@hyperc5249
5 ай бұрын
Thanks. Great hobby.
@offsetrc
6 ай бұрын
That is a great location for this car nice run there good cars this one i think looks awesome and there fast as as well love mine
@hyperc5249
6 ай бұрын
Thanks. I have 3-4 spots to run my rally cars.
@rickrussell
7 ай бұрын
I'm just replacing the screws as I go. A few assortment kits of 2mm, 2.5mm, 3mm in various types (cap/button/flat) and you can easily find enough fasteners to replace whatever you need to.
@hyperc5249
6 ай бұрын
Great idea.
@AllCoolThingsStoneMountain
6 ай бұрын
Hey, I can't really find the link for the deluxe dust cover for the insides, like you said. Could you please reply with a link for it? Thank you.
Trying to find the info on the dust cover. Please assist if possible!! Thanks
@hyperc5249
4 ай бұрын
Raidenracing Chassis Dirt Dust Resist Guard Cover for 1/16 Mini Revo Summit Slash Rally a.co/d/29DsZPE
@kjetilpedersen583
6 ай бұрын
Love this cars have hyper go drifter and 4*4 Offroad ❤Thanks for nice video and informasjon Thank you.
@hyperc5249
6 ай бұрын
Thanks. No problem awesome little rig.
@laurentderrien
6 ай бұрын
It's pronounced : Ceetro - N
@hyperc5249
6 ай бұрын
I hate to bust your bubble, but it is actually pronounced si.truhn (Citroën). But... thank you for your input.
@-Astro--
6 ай бұрын
@@hyperc5249wrong
@craigedwards5520
6 ай бұрын
Sitran
@babupranav
6 ай бұрын
How did you get the lights to still work with then new receiver? Thanks.
@hyperc5249
6 ай бұрын
Plug them in. Works just the same as stock.
@___ll___1321
6 ай бұрын
Very nice specs, but I still prefer the previous design, haha. Right now, the one I want is the Stinger, but it's almost double the price
@hyperc5249
6 ай бұрын
STINGER????
@___ll___1321
6 ай бұрын
@@hyperc5249 ftx stinger, is not a rally car but i think it is a similar platform
@___ll___1321
6 ай бұрын
@@hyperc5249 Oh, you have a video about it, but under the name of HNR Panther. Do you think this comparison makes any sense, or are they totally different?
@hyperc5249
6 ай бұрын
@___ll___1321 where did you see that? I have not seen it. I like the Stinger.
@hyperc5249
6 ай бұрын
Exactly the same.
@marvinmaro1633
7 ай бұрын
Keep up the good work bro. Which MJX type car, truck of buggy is the best one to buy or choose?
@hyperc5249
7 ай бұрын
LOL all of them!!!! I couldn't choose just one. Jumping the H14BM, speed 14210, rally 14303.
@marvinmaro1633
7 ай бұрын
@@hyperc5249 Lol.. Thanks for the quick response bro. It's hard to choose for me 😁lol .. Do all MJX cars have throttle delay?
@rickrussell
7 ай бұрын
Facts here, my friend -- for off road, the 16207 buggy and 16208/209 monster trucks are *dialed in* out of the box. The 14301/02/03 road cars are amazing. I bought the 14210 truggy, it's good fun, but it is WAY twitchier and it rolls like a mofo. The 162XX models are just better overall, IMO.
@-Astro--
6 ай бұрын
@@rickrussellI 100% agree. The 14210 is over hyped and imo not the best of them
Пікірлер: 96