Thank you! Info that the OLD PIN is saved in the dash was not mentioned anywhere else.
@aud169
10 ай бұрын
Bro... thank you so much. This is the answer I was looking for and as you said there is not much info on it anywhere on the net. I have a customer with a fried ECU and I need the pin code to be able to replace it with VCDS and I wasn't sure if the ECU pin is the same as the cluster pin. Thank you, Thank you. Legend
@StephenPassat
4 ай бұрын
So what cable and software is this I have vcds cable do I need a different one and different software ?
@mojojomo6750
3 жыл бұрын
What about newer cars - will Vagtacho read pin-code from a Fabia 2014? Or does Vagtacho only work with 'ancient' cars (1997-2007 or thereabouts)???
@rygelisabella7759
3 жыл бұрын
Hi, how i find the pin for the new ecu (used) i watched your video i understand how to fin the old ecu pin .... so how I find the pin for the new one?
@Quant-Beat
3 жыл бұрын
Could you please link to exactly the one you bought?
@marcelapoblete9156
Жыл бұрын
I have a golf 2005 with immobilizer problems apparently. I bought TACHO (5.0) and I scanned it. Big problem: When I connect the tacho it doesn't say access granted, just GO AHEAD. And when I want to read the PIN it answers UNKNOWN IMMO BOX. How can I get the PIN NUMBER THEN?
@brandonshelters
2 ай бұрын
Where can i buy this, software too? Thanks.
@katscan9114
2 жыл бұрын
What main issue let u diagnose fried ecu. Im not getting cel with key on.
@joseperez-te6jb
Жыл бұрын
Good morning friend, the cluster of my jetta a4 2003 1.9 tdi was damaged, I put a used cluster on it, it starts and goes off, the immobilizer indicator light comes on in the cluster, could you help me please, thanks
@brianhester9103
4 жыл бұрын
got an Cluster that wont communicate, so, need to replace it, how do you get pin code off of the ECU using vagtacho? I installed a new to me dash cluster and can get that pin, but will need the old cluster pin, which, I believe is the ECU pin
@Quant-Beat
3 жыл бұрын
VAG EEPROM Programmer takes it, costs nothing but that requires a Ross Tech interface, at least it works for sure with that. Don’t but anything from eBay as they are very likely not working at all.
@gulgul2006
Жыл бұрын
What was the software you used? We see the cable.
@carnation9451
4 жыл бұрын
Worked! Thank you
@Quant-Beat
3 жыл бұрын
Which VAG Tacho?
@mahirc4091
3 жыл бұрын
My car Audi a3 2002. year was stolen. I found and returned the car, but now the immobilizer light flashes constantly. The car can start with any key. The immo light flashes all the time while the engine is running. How do I fix this?
@TreeE30VeRT
3 жыл бұрын
my pc wont let me download the program from vag tacho themselves my pc keeps flaggin it as malicious software even when i forced antivirus off now it says im missing a dll fix. what could be the issue?
@megaanton9605
2 жыл бұрын
which version from vagtacho you use in Video?
@worthowaste
Жыл бұрын
Bro are you still around?
@Monsterrr69
Жыл бұрын
Wana help me with my immoiblizer delete plz n thank u
@DuvaDidi
Жыл бұрын
Hey guys! Its working Opel g astra??
@thanhnguyen4908
Жыл бұрын
Where can buy this tacho genuine cable & software ??
@leo959
2 жыл бұрын
Where did you buy the vagtacho cable?
@s3eb21i8
Жыл бұрын
i think is same as vcds
@AbuDabi522
Жыл бұрын
@@s3eb21i8 no, different.
@AbuDabi522
Жыл бұрын
On AliExpress for around 30€
@3001conquer
3 жыл бұрын
Can I obtain the pin number using the CVDS
@huseyinsen6298
Жыл бұрын
Vw bora vdo v21 ecu kodu neyi secmeliyim
@Quant-Beat
3 жыл бұрын
Which VAG Tacho does work for PIN? There are many useless China-craps out there, I bought one but it can't do the job.
@markshone4606
4 жыл бұрын
I get unknown immob box
@Quant-Beat
3 жыл бұрын
Probably you have that Chinese crap I have, 3.01. They don't work at all as far as I know...
@partielauto
3 жыл бұрын
@@Quant-Beat i have one chinease crap and it works !
@Quant-Beat
3 жыл бұрын
Can you link to exactly that one you bought?
@partielauto
3 жыл бұрын
@@Quant-Beat i bought one of those on aliexpress. The cheapest one, i think !
Пікірлер: 39