Thanks for the tips! I have the full top with metal window mesh so I needed more support. I only used the pen springs in the back and barely half just enough to keep it level. The front has better travel without!
@Van_City
2 жыл бұрын
Perfect, sounds like you have it dialed in👍💯💥
@RCModSquad
3 жыл бұрын
Cool mod with the solder. I have some 1/8” lead wire. It’s a little heavier per inch. Have a great day and be safe out there!
@Van_City
3 жыл бұрын
I wanted to use lead wire but it’s next to impossible to find here. Thanks for stopping by Enjoy the rest of your weekend 👍💯
@RCModSquad
3 жыл бұрын
@@Van_City I was wondering about that. Lots of different regulations around the world.
@Van_City
3 жыл бұрын
@@RCModSquad I think your correct many items here in Canada are regulated or restricted. I believe lead is one of them.
@RCModSquad
3 жыл бұрын
@@Van_City you should see the regulations in California. They have warnings on everything. Even my RC cars have a warning ⚠️ label 🏷 “this item contains chemicals known to the state of California that may cause cancer.” It’s crazy how much ink and time is used to print that. Almost anything I buy anymore has that. I think even the new toaster we just bought had it. Have a great day my friend and be safe out there!
@Van_City
3 жыл бұрын
@@RCModSquad I remember that the last time I visited California there were warning labels on everything.
@briansteep2245
3 жыл бұрын
Thanks for the information!just ordered mine..I just love the look of this truck!
@Van_City
3 жыл бұрын
It’s an awesome rig I’m sure you’ll have a great time with it. 👍💯💥
@Hjerte_Verke
2 жыл бұрын
It's a 95% faithful model of a 2012-2016 Defender 90. It is basically a scale model that is radio control.
@IowaBudgetRCBashers
Жыл бұрын
Great video Dan. I just bought the camel trophy d90.. comes with a 3ch radio system, but otherwise stock. Looking forward to it 😁
@Van_City
Жыл бұрын
Thanks Thad, you’ll have a great time with the d90 they are awesome 👍💯
@duecer.c.7896
3 жыл бұрын
Definitely going to use this mod for my MN99s #FactsNoFiction
@Van_City
3 жыл бұрын
awesome 👍
@Fortes_RC_Adv
9 ай бұрын
Very good video😁💪 I subscribed your channel 👌
@Van_City
9 ай бұрын
Thanks I appreciate the support 👍💯
@MikeRCWorld
3 жыл бұрын
This is nice crawler, nice mods thumb #8 up
@Van_City
3 жыл бұрын
Thanks appreciate you stopping by Have a great day 👍💯💥
@scottmclinden228
3 жыл бұрын
Great idea
@Van_City
3 жыл бұрын
Thanks 👍💯💥
@edwinnegron7761
3 жыл бұрын
Good morning, I used the magnetic tape/glue to the tires. about 56 grams per tire..... roll of tape was about 3 dollars
@Van_City
3 жыл бұрын
Great idea with the magnetic tape, that’s one I haven’t seen yet. 👍
@adamcumbers232
3 ай бұрын
Just picked up one of these, great budget friendly mods 👍🏻 Any ideas for the steering? I put my wheels straight using the controller dial, then one turn of the truck and there out again? Very frustrating
@Van_City
3 ай бұрын
Which model do you have?
@adamcumbers232
3 ай бұрын
@@Van_City it’s the MN99s I’ve tried adjusting lots of things, just every time I steer after centering, the wheels are not straight, then I re centre and same again. Still a great budget crawler, loads of fun, with a pinch of frustration 😂
@Van_City
3 ай бұрын
@@adamcumbers232 if you have access to a 3d printer you can print a mount to relocate the steering servo to the top of the axle
@ogre350
3 жыл бұрын
It seems like the extra spring takes away the suspension travel. Is that just a preference?
@Van_City
3 жыл бұрын
If the spring is too long you will lose some suspension travel. I find 1/2 the spring length works decent without losing travel and preventing sag.
@edwinnegron7758
Жыл бұрын
I used your links for a few items but did not see if you kept the same motor or did you go to the 370? thanks
@Van_City
Жыл бұрын
At the time of this video I did keep the 260 motor and has been great. I have since upgraded to a 370 mainly to test a new esc I had installed. Here’s a link to that video with links to the upgrades I currently have linked in the description. ISDT ESC70 Programable Brushed ESC kzitem.info/news/bejne/ymdo3IyFrqeYnmk
@scaleworksRC
11 ай бұрын
I just got the MN99S and it won't even pull it's own weight up a hill if it doesn't tumble first. When it gets to a tough spot, the lights start blinking and the battery cuts out like it's too much amperage or something. Are they really that weak out of the box or did I get a lemon?
@Van_City
11 ай бұрын
It sounds like your’s either has a bad battery or the electronics are faulty. It should definitely be more capable than what you are describing.
@scaleworksRC
11 ай бұрын
@@Van_City Thanks
@Sparroh
3 ай бұрын
What is the difference between x6 and x6f etc in the transmitter options?
@Van_City
3 ай бұрын
X6 is the transmitter x6f is the receiver. X6fg would be a receiver with built in gyro
@briansteep2245
3 жыл бұрын
Should I drill a new air hole?will it matter if the hole is covered in the rim?
@Van_City
3 жыл бұрын
I haven’t had any issues with mine, I think you’ll be fine without drilling a new hole.
@hellofromsoutheastalaskarc7517
2 жыл бұрын
Hello from southeast alaska do you have any stickers for my rock crawlers remote control
@Van_City
2 жыл бұрын
👍💯
@McDeLeeuw
10 ай бұрын
You make the spring stiffer?
@Van_City
10 ай бұрын
Yeah added a pen spring to the stock shocks help it from sagging
Пікірлер: 44