they are a great option and good idea on flipping the tires.
@TheDIYGuy999
2 жыл бұрын
@@RunThatRC Thank you. You should also have a look at my DIY sound controller on my channel. I'm using it in various WPL vehicles.
@rcadventuresunlimited
3 жыл бұрын
fantastic rock crawling, great run, awesome 👍👏
@RunThatRC
3 жыл бұрын
Thanks 👍
@Fisherman-gc1fw
3 жыл бұрын
I bought the MN99s on a flash sale, it is a beautiful crawler
@RunThatRC
3 жыл бұрын
Can't go wrong for the money!
@ClassicSteelRC
3 жыл бұрын
Another great video, David! I love my MN99S-A but I've also had to make several upgrades to it, including the installation of metal driveshafts, the swapping of the stock electronics with the WPL RES V3 and the WPL 370 motor with the two speed gearbox. I'm also waiting for the delivery of my metal upgrades for my front and rear axles with the metal hexes and steering knuckles as well as the metal steering links. I've also raised the motor to give it more clearance and I've fabricated a sheet metal center skid plate to eliminate any hang ups. It'll be a totally sweet rig when it's all done in a week or so. I'll send you a video link when it's done. Thanks for all your advice and support!
@RunThatRC
3 жыл бұрын
after all those upgrades its going to fell like a totally different truck.
@ClassicSteelRC
3 жыл бұрын
@@RunThatRC Yep, I'm sure it will! These rigs really are so much fun when they're all dialed in. I need to fix the steering geometry. Any advice on that?
@elsasquatchgonzalez804
3 жыл бұрын
I'm impressed with that RTR awesome video
@RunThatRC
3 жыл бұрын
You and me both! Did really good.
@Mattschwag
3 жыл бұрын
Great video. Love the MN and Wpl vehicles. Wish I could give the video 2 thumbs up. Keep up that great content
@RunThatRC
3 жыл бұрын
Much appreciated!
@alainarcilla6753
3 жыл бұрын
As always, very nice video you have there.
@RunThatRC
3 жыл бұрын
Appreciate it Thanks for stopping by!
@okankayrak1407
3 жыл бұрын
Again great fun video. Than you. I had my first mn-90 right after watching ur videos. Now i will go with mn86k. Have couple questions if you dont mind to answer. 1. What is the main differences between mn86k-mn86ks beside plastic trim. 2. May you please suggest waterproof and better servo for this setup rather than the original. 3. What is the size for battery compartment of mn86k i want to get max mah powered lipo but i want to make sure it fits. Thanks in advance
@RunThatRC
3 жыл бұрын
1. ks has more accessories and ball bearings. 2. I use the stock servo and waterproof it. 3. 1500mah 2s li-ion 18650 cells was the biggest I fit in the battery compartment.
@andymerc190E
3 жыл бұрын
I NEED that G-wagon
@RunThatRC
3 жыл бұрын
It's the best from mn model yet. Goes together like a tamiya kit.
@rcarty419
3 жыл бұрын
How can there be a thumbs down??? 👍👍great video thanks for the info. Great looking rigs!!!! Nice comparison!!!!
@RunThatRC
3 жыл бұрын
It's been the same three people usually hahaha! They are my number one fans!
@OffroadRC_YT
3 жыл бұрын
Very nice video! It also seems that you got 2019 MN 99s. If it was purchased in 2020, you would have got coloured tail lights and softer shocks with more travel
@RunThatRC
3 жыл бұрын
Thanks for the info!
@sharkmastergaming1524
3 жыл бұрын
I think the D90 won that round. You've modded that thing really well. I'm also happy with the Mn99s' performance. I'm still waiting an a new motor for mine but that'll be here soon.
@RunThatRC
3 жыл бұрын
Should see the D90 with the stock wpl brushed 370 2 speed and cheap 30a esc. So much smoother throttle control than the sensorless setup.
@PJMCollectibles
3 жыл бұрын
nice showdown. do you think adding more weights and grippier tires would make it crawl better? they all look good except for the 86ks interiors. the underdog 99s performs well, competing against the brushless 90 and hobbwing-equipped 86ks. nice video, tito david! 👍🏻
@RunThatRC
3 жыл бұрын
for sure adding weight down low would help. and removing the spare tire too. It's a heavy rig.
@jamaicarctv9587
3 жыл бұрын
nice rigs man
@timmyjackson6918
3 жыл бұрын
Got my MN99s about 3 weeks ago and already bought the front & rear metal axles setup and have the metal shocks and pull rods coming in soon. What 370, 2 speed motor and Esc do you suggest if you could please help me out. Love the video by the way!
@RunThatRC
3 жыл бұрын
I like the WPL 2 speed. They have been reliable for me.(the metal links will give you issues with clearance of the 2 speed shifting arm. The WPL Res v3 esc is good or a 30a esc with your own tx/rx.
@timmyjackson6918
3 жыл бұрын
@@RunThatRC thanks man, really appreciate it.
@Imgrldsalvador
3 жыл бұрын
What do you think is the better performer and to upgrade at the same time. Mn86 or Mn99s? I kind of I have dilemma which one should I buy.
@RunThatRC
3 жыл бұрын
They are both cool trucks. The Mn99s uses similar parts to the WPL and JJRC products so that makes it easy for mods. The MN86 is a bigger scale so out the box performance goes to the mn86. In my opinion the mn86 is more hobby grade than the mn99 and I would go with the mn86ks version. The Mn86 is more durable as well, I haven't damaged any parts on my mn86k and ks yet. Ive replaced driveshafts and gearboxes on some of my mnd90s and 99s.
@Imgrldsalvador
3 жыл бұрын
@@RunThatRC I will take your advice, I will buy the MN86KS, but the downside is. It’s way more expensive💸 than the MN99S 🤣 By the way I am from Philippines, I always like your contents, because they are always good for the buck.
@RunThatRC
3 жыл бұрын
@@Imgrldsalvador yes the MN86KS is more expensive but its a way better kit than the mn99. I was born in the Philippines I'm half filipino. Thanks for supporting the channel brotha!
@peacesmy2011
2 жыл бұрын
Nice video
@RunThatRC
2 жыл бұрын
Thanks
@Acheronus80
3 жыл бұрын
I have just got an MN99s, any thoughts for a total noob to crawling / mini scale? I've always had 1/10 off road cars. Anything I need to do / not do, or free/budget mods to help with running it?
@RunThatRC
3 жыл бұрын
metal diff gears axles with metal hexes and driveshafts. For electronics I like the WPL 2 speed and that will require a esc, transmitter and receiver upgrade. Some weights in the wheels help it perform better because the hard body is heavier than lexan.
@Acheronus80
3 жыл бұрын
@@RunThatRC got my MN99S yesterday, had an issue with the servo not being centred, and everytime I put full right lock the suspension compressed.. now when I centred it, I have no left turn when there is weight on the car... Off the floor the steering is fine .. any ideas??
@seanyee1039
3 жыл бұрын
I'm trying to figure out what the next RC should be after my C24. I would like something with oil shocks but 10th scale is a bit too big. Between the RGT 136161 v2 and the MN86ks at pretty close prices (ignoring that I would need an esc and radio for the MN, and that one is 1/12 and the other is 1/16) which out of the two would you suggest? Thanks!
@RunThatRC
3 жыл бұрын
I like both. The RGT is pretty good out the box and comes with decent electronics and transmitter. Fit bigger tires and wheel weight it and its going to do pretty good.
@seanyee1039
3 жыл бұрын
@@RunThatRC awesome thank you!
@johnverschoor7513
3 жыл бұрын
My tires keep coming off , is there something to fill them up with
@RunThatRC
3 жыл бұрын
I glue the tires to the rims. they are soft and will roll off consistently if not glued.
@stekeel6993
3 жыл бұрын
Best crawler mn 99s
@RunThatRC
3 жыл бұрын
They are fun!
@stekeel6993
3 жыл бұрын
@@RunThatRC put hobby wing 1060 ESC in mine they are fun
@RunThatRC
3 жыл бұрын
@@stekeel6993 nice! That's the best esc for the price in my opinion.
@KF-hb5vx
3 жыл бұрын
Hey there I always appreciate your help. Maybe you can help me figure this out. I just changed my wplc24 motor to the 260 motor. Works great expect in reverse I have such low power that it can't even reverse uphill or even if it's a little bit rough terrain. I'm running the hobbywing 1625 esc Please help
@RunThatRC
3 жыл бұрын
check the programming on the esc. Also what tx are you using?
@KF-hb5vx
3 жыл бұрын
@@RunThatRC so it died after about 5 minutes. Wonder if it was a dud or something?
@JoseSantos-qy5nm
3 жыл бұрын
Can I use my WPL Reciever Board, WPL Servo and Stock WPL Remote from my C24-1 to my D90. I want to upgrade my D90 to proportional. The cheapest way.
@RunThatRC
3 жыл бұрын
yes you can swap those in the D90 they will work.
@JoseSantos-qy5nm
3 жыл бұрын
@@RunThatRC Thanks Dave! It's been awhile since I have been following your content. Keep running that RC ☺️
@zacmlinaric
3 жыл бұрын
How were you able to fit the brushless motor in it?
@RunThatRC
3 жыл бұрын
The brushless motor I used is similar in size as the stock 2 speed motor and it bolts right up.
@zacmlinaric
3 жыл бұрын
@@RunThatRC thanks I’m buying the mn99 in a few days so I’m going to do that mod
@troyferguson1326
3 жыл бұрын
is the servo on the 86ks waterproof or did you dip it
@RunThatRC
3 жыл бұрын
I had to dip the board inside the servo then the servos case as well.
@carlossrcadventure9484
3 жыл бұрын
By the way can you also put a 30a esc in the mn86ks ?
@RunThatRC
3 жыл бұрын
I wouldn't go less than 45a esc for this setup. It's bigger and heavier than the mn99s.
@gilemmanuelhernandez5844
3 жыл бұрын
Would you recommend a wpl c44km kit over the mn99s taking into account that the wpl is a bit more then 2 times the price of the mn99s (with electronics) but also has more features then the mn99s?
@RunThatRC
3 жыл бұрын
C44KM all the way for me. It's just a better setup rig and you get to put good electronics in it.
@gilemmanuelhernandez5844
3 жыл бұрын
@@RunThatRC thanks man.
@fords4life914
3 жыл бұрын
Noice!
@RunThatRC
3 жыл бұрын
thanks!
@shahzanrulz9
3 жыл бұрын
So which is better ? Mn86s or mn99s?i just bought mn99s seems not great at climb..its underpower..
@RunThatRC
3 жыл бұрын
In my opinion the mn86 is definitely a much better Rc. If you like land rovers then the mn99 isn't bad just needs some mods like the WPLs do.
@kronosdarkangel5290
6 ай бұрын
What are the difference between the 90, D90 and 99s?
@RunThatRC
6 ай бұрын
some looks and some electronics upgrades on the newer 99s. They are pretty much the same rig.
@cheapmunkph
3 жыл бұрын
First!
@humancalculator711
3 жыл бұрын
can you run all three of them at the same time
@RunThatRC
3 жыл бұрын
I'm not sure what you mean?
@Onisamurai92
11 ай бұрын
What size tire comes on the mn99s stock?
@RunThatRC
11 ай бұрын
about 750mm tall and 350mm wide.
@user-do3sk8xx9v
2 жыл бұрын
it is all the same mecanic in all models ?
@RunThatRC
2 жыл бұрын
no the mn86ks has a newer more hobby grade chassis and a separated center diff. and front mounted (under hood) motor.
Пікірлер: 83