I’m thinking of renting out my detailing van, good or bad idea? If he rents out 4 detailing vans 1 van for $500-$1000 weekly he could make full time passive income on one van yearly 30k+
@Brandinwagstaff
6 ай бұрын
Not a bad business model. I think this would be a lucrative business with the right marketing and clients for sure.
@nofsgiven3855
17 күн бұрын
Why would someone pay 500$-1000$ weekly to rent out a detail van? By that price just get a loan from the bank and buy a pre build detail van from H2O and you own it
@peeweeacres
5 ай бұрын
How many times have we watched real detailers do this exact same video. Think of something new .
@philipcrow3806
6 ай бұрын
Love the set ups. Been mobile detailing a while and been thrre a frw setups and vans. Within the next couple years im looking forward to a electric/battery based setup with solar on the roof to aid it. I see some peolle doing the battery generators but i know it wont quite stack up to what i need yet
@Brandinwagstaff
5 ай бұрын
From the guys I know when electric, it seems they says its the only way to go. Im looking forward to moving towards electric myself. These generators are just too loud.
@nofsgiven3855
17 күн бұрын
Am I the only one that thinks 23k for an old eco van with plus 200k miles expensive?… Lol on the other side I love that Brandon put Hector on the spot for the van discounts. I rather not get a discount but instead get the van full of products. Gallons bottles, brushes , buckets and towels .
@Skdjiejxuje
6 ай бұрын
Hey h2o you guys need to make an east coast location. I’m based in sc and we have nothing here like your guys. Setups like these aren’t common at all here. A charlotte nc location would make you guys a killing.
@Brandinwagstaff
6 ай бұрын
Yeah they definitely have the infrastructure to make it happen, the only challenge would be recreating there fabrication team at another shop. The main guys who do the builds at this location are beasts man. They really get the job done, it’s probably hard to get guys like that. But if they did back east they’d probably have guys lining up to get setups from them.
@TheUltimateTouchDetailing
6 ай бұрын
Check out Ralda’s details, he’s in Richmond, VA
@Finetouchautopros
4 ай бұрын
Same here in KC. I ain’t never seen anything like this here
@andrewschmidt4663
6 ай бұрын
wheres the link to the premade vans
@Brandinwagstaff
5 ай бұрын
instagram.com/h2osetups?igsh=MzRlODBiNWFlZA==
@ErickJoelSERRANO
29 күн бұрын
Where can I get the complete bus ready to work, I want that business
@Brandinwagstaff
23 күн бұрын
@h2oautodetailsupply
@MrNikaHD
6 ай бұрын
So, they sell the trucks with the built-in setup?
@Brandinwagstaff
6 ай бұрын
Yeah , save all the fuss and get it from them. They get the van and build it in a way that it can be sold cheaper. They have been doing this for a while and have sold tons of ready made setups
@MrNikaHD
6 ай бұрын
Would you recommend this for starters? @@Brandinwagstaff
@Jesusperez-kq1ql
6 ай бұрын
Soon to be!!! probs to the video and Hector Jr mad love from paramount.
@Brandinwagstaff
6 ай бұрын
Thanks Bro. Yeah Hectors the man, Paramount is just down the way 👌
@Skdjiejxuje
6 ай бұрын
Fire video. This is by far my favorite one.
@Brandinwagstaff
6 ай бұрын
Heck yeah Im glad! I want to do a few more this style and probably the same length. We blew through that hour, it felt like 15 minutes.
@SinCityDetail
6 ай бұрын
@h2oautodetailsupply farm out the laser cutting and breaking, otherwise it will cost a fortune to by a fiber laser and press break. I own a suspension company and this is what I've done for years.
@Brandinwagstaff
6 ай бұрын
As many laser cut products that they are selling for maxshine it makes sense for them to set up there own operation. But it wouldn’t make sense for them to have another manufacturer produce it because they are already getting it from maxshine at a low cost. By them having there own machine they’ll produce hundreds of there own products and widen there profit margin. Those machines would pay for themselves in no time.
@SinCityDetail
6 ай бұрын
@@Brandinwagstaff a quality fiber laser table can cost $1,000,000. A quality press break can run $50,000. They have to sell a lot of detail set ups to justify that cost. I've owned a long travel suspension company for over 10 years and I still couldn't justify the cost. The laser company would not "manufacture" the entire product for them, just handle the laser cut steel, breaking the steel, then hand it back to them. They would then do all the fabrication and as he mentioned he would later do the powder coating himself. Even that is a HUGE investment.
@Moparmanic90
6 ай бұрын
He right about farming it out i work at a fabrication place the laser cutting and breaking takes no time
@wilfredgomez2632
4 ай бұрын
Thank you for the tour. I got the EcoFlow delta Max 2 bc of one of your videos. In my opinion is a very good organic option. Those vans equipped are bargain, I got my Promaster City 32k plus set up I made myself almost 10k. Ty again.
@roadwork1676
Ай бұрын
Is the pro master available?
@Brandinwagstaff
Ай бұрын
I think so, you can DM on my IG at Wagstaff Auto Detailing and I can give you an update on it
@ponch5226
6 ай бұрын
Prices on those vans are crazy!!! This ain’t 2020 market anymore…
@Brandinwagstaff
6 ай бұрын
I mean they’re not cheap but I wouldn’t say crazy, How much would you expect them to be? They’re actually trying to make them as affordable as possible to hook people up.
@ponch5226
6 ай бұрын
@@Brandinwagstaff not for $24k+, I’d say less than $20k would be reasonable. I buy cars from insurance auctions and you can easily find a Nissan NV less than $7k
@sinfulyetsaved
6 ай бұрын
Gonna be going to you guys to get my van done up. From Fresno Cali.
@Brandinwagstaff
6 ай бұрын
Sick man! Best of luck! I hope you enjoy the whole process, its a lot of fun 💪
Пікірлер: 36