@RizwanSial
mobile panel oca touch and glass cutting withe lcd separator machine
✦✦✦✦ Suggestion ✦✦✦✦
Mobile Combo Remove From its Folder | All Mobile Combo Remove | Class-2
• Mobile Combo Remove Fr...
how to use lcd separator machine | separator machine settings | Class-1
• how to use lcd separat...
How to cut and separate the OCA glass from the mobile panel
1✦ Cutting and separating the OCA (Optically Clear Adhesive) glass from the mobile panel requires precision and caution. Here's a general guide on how to do it:
2✦ Gather the necessary tools: Safety goggles, gloves, a heat gun or hairdryer, a precision knife or scalpel, a plastic pry tool or playing card, and a clean, flat surface.
4✦ Ensure your safety: Put on the safety goggles and gloves to protect your eyes and hands during the process.
5✦ Heat the OCA glass: Use a heat gun or hairdryer on a low to medium heat setting to warm up the OCA glass. Hold the heat source several inches away from the surface and move it in a sweeping motion to evenly heat the entire area of the OCA glass.
6✦ Soften the adhesive: The heat will help soften the adhesive between the OCA glass and the mobile panel. Be careful not to overheat or concentrate the heat on one spot for too long, as it can damage the display or other components.
7✦ Cut the OCA glass: Once the adhesive is softened, use a precision oca cutting wire or to carefully cut along the edges of the OCA glass. Start at one corner or edge and make precise incisions, applying gentle pressure. Take your time to ensure accurate cuts.
8✦ Insert the oca cutting wire: Once the OCA glass is cut, gently insert a oca cutting wire into the gap between the OCA glass and the mobile panel. Start at one corner or edge and slowly work your way around, applying gentle pressure to separate the OCA glass.
9✦ Gradually lift and separate: As you insert oca cutting wire lift the OCA glass away from the mobile panel. Take your time and proceed slowly to avoid damaging the display or other components. Apply more heat if needed to further soften the adhesive.
10✦ Continue separating: Once you've lifted one section of the OCA glass, continue moving along the edges, gently prying and lifting until the entire OCA glass is separated from the mobile panel.
11✦ It's important to note that cutting and separating OCA glass can be challenging and risky. If you're uncertain or uncomfortable performing this task, it's advisable to seek assistance from a professional technician who has experience in mobile phone repairs.
Learn mobile phone repairing free online. Mobile repairing full course in Urdu Hindi. Learn complete mobile phone repairing. Mobile phone repairing full course. Mobile repairing course. Mobile phone repairing shop. Mobile phone repairing training. Mobile phone repairing tutorial. Mobile repair machines.
✦✦✦✦ covered off ✦✦✦✦
mobile display glass cutting
mobile panel oca touch and glass cutting withe lcd separator mahen
how to cutting mobile panel oca glass
how to mobile panel oca glass cutting
Glass Separator | how to use lcd separator | screen separator | mobile lcd separator machine
Any Touch Glass Replacement without Oca Machine SUPER EASY
How to Display glass cutting |डिस्प्ले कटिंग कैसे करें New simple trick & tips
lcd screen separator machine use||lcd separator machine temperature settings
Mobile 📲 Display glass changing Properly
✦✦✦✦ Hashtags ✦✦✦✦
#ocaglass #glasscutting #combo #mobilerepairing
✦✦✦✦ My Other Social platforms ✦✦✦✦
✦✦My Official KZitem Channel✦✦
/ rizwansial
✦✦My Official Website✦✦
www.rizwansial...
✦✦My Official Facebook Page✦✦
/ rizwan.sial860
✦✦My Instagram Link✦✦
www.instagram....
✦✦✦✦ THANKS FOR WATCHING ✦✦✦✦
✦✦✦✦ LIKE,SHARE & SUBSCRIBE ✦✦✦✦
Негізгі бет mobile panel oca touch and glass cutting withe lcd separator machine
Пікірлер: 48