Some flight footage is “blurry” due to camera damage. 😢 Quantities are limited, no coupon at this time. 💥Moblite 7 bit.ly/3h3uEWr Moblite 7 Spare Frame bit.ly/37DRKjm 💥Moblite 6 bit.ly/2WzKVJe
@SOLARFPV
3 жыл бұрын
You mentioned welder? I think you did a video on welder. What do you use? I use contact glue for fast repairs and plastic glue which works ok but needs to dry for 12 hours 😊
@NickBurnsFPV
3 жыл бұрын
@@SOLARFPV Yes, I still use welder. Is there a particular contact glue you like?
@SOLARFPV
3 жыл бұрын
@@NickBurnsFPV I use Locktite superglue, and a Danish plastic glue from Dana Lim. I have tried lots of different types, but none really hold out more than a few crashes after gluing and hardening.
@dcfpv9004
3 жыл бұрын
Do you think the flight controller will be made available separately
@SOLARFPV
3 жыл бұрын
@@dcfpv9004 eventually it probably will, like their other models, but because of hype, they can't produce enough for both model and spare part. I hope I am righ.
@allennickles3970
3 жыл бұрын
Yeah I think a lot of people forget about the Whoops once they get to fly open prop design.This Chanel & Whoops was how I learned how to fly. And a purchase from Adam Bomb 2.5 Tomoquad build was my next step up from whoops! And where I really was able to dial in acro flight. Now 10k and over three years later..lol...I like to really show my sincere respect to all the inventors & developers to the whoop community bringing this hobby to where it is today!😀 And most of all!!! Thank you Nick for taking the time to answer all my many questions back in those noob days almost three years ago now Guys like you is what makes this community great!😀 HAVE A VERY MERRY CHRISTMAS NICK! & HAPPY NEW YEAR
@NickBurnsFPV
3 жыл бұрын
Thank you Allen. I appreciate the kind words.
@moblades1
3 жыл бұрын
I agree with you on the 75mm aspect. I put my Mob6 HD components into a Mob7 frame with 40mm props and it flies so much better.
@legendarypot8oanimates160
3 жыл бұрын
I am currently putting my uz65 components into a tinyhawk frame with 40mm propellers.
@allennickles3970
3 жыл бұрын
You dont hear much from the original whoop guys anymore unless your on a forum or blog rc groups, etc..and every once in a while they might post. For me they are the legendary guys that innovated fpv to where it's at today. I started with brushed toy whoops with a camera added on top of it ..and KZitem chanel like this one. Learning everything I could about fpv. And now after hundreds of builds at all different sizes I find myself right back where I started. I also like to give a great amount of gratitude to all those guys mentioned in this video & also you to Nick for pumping out great content as always for so long! I remember starting to talk to you back in Aug 2018 ..lol...Wow how time has went by! Cheers🤗
@NickBurnsFPV
3 жыл бұрын
Yes sir. The guy I think doesn't get enough credit is Benedict. He was all about the micros and was the leader in brushed motors. Plus he was very interesting to listen to. I think he had to close up shop and move on due to family health issues. :(
@ericcoker8784
2 жыл бұрын
I am so damn happy! I love this new hobby and pop my cherry on this Mobula6 and Moblite7. Short story: I had purchased a 2nd Moblite7....the first was (now is resurrected) an awesome flyer and the second one was bought BEFORE I almost scraped the first. The first one had a bad battery ground and tried to resolder it back. I have a good iron and rusty skills on soldering. I ended up cooking the board due to the solder included in a kit (solder was the higher temp 99% tin) and using almost the max heat. Not to give up, I got the Newbee drone field fix it kit. Didn't use the supplied iron. Practice and more practice on the cooked board and the "practice" board that was supplied. I did good. Board worked, my solder joints for the motors is good to very good. Power and ground was decent. Two motors were reversed. Took a day too figure how to fix. But Bl heli and Betaflight and many many youtube videos later...done.
@AGILISFPV
3 жыл бұрын
Super anxious to see how this board performs. Love how happymodel pushes the envelope all the time.
@jacquemeier2005
3 жыл бұрын
A long way from a walkera ladybird with micro vtx + cam I used to fly to a mobula 6. These were the days when an 8inch quad was “small“. B) And I loved my early brushed racer so much. And now everybody loves the small rockets too. :)
@Cr125stin
3 жыл бұрын
Ooo sweet! I commented probably close to 2 years ago saying how my go to whoop is my inductrix plus because it had more flight time than any brushless whoops at the time. This changes things now. I’ll have to get one. Thanks for the video!
@NickBurnsFPV
3 жыл бұрын
The inductrix started indoor flight for me. So cool someone had the thought
@SOLARFPV
3 жыл бұрын
Selfadheasive cork coaster, cut to fit the FC top. It is light, shock absorbant, fire and waterproof.
@helixinwonderland8938
3 жыл бұрын
Looks like my first quad. Build it 2 years ago with an eachine E011, a crazybee F3, a turbowing camera and VTX. Still working! The camera is between the hoops fixed with some double sided tape and a rubberband.
@NickBurnsFPV
3 жыл бұрын
That sounds about right. I think my E010 video has 100k views crazy how excited we were to see a brushed quad not the inductrix 🤪
@tarkusxfpv8010
3 жыл бұрын
Yea its old xD But for people who dont want to tinker its good but the hardware won't last so basically if you dont like to repair / fix id not let a beginner fly this . Good things is the new FC and the HQ 40 biblades i want to test .
@turboomni848
3 жыл бұрын
Got my Moblite 7 today and experienced the hopping on take off like Nick mentioned.. Turned off "Always Enable Air Mode" Off and it stopped. I am no Nick Burns in the flying but I am impressed so far with this thing. Long flight times indoors in my house ,7 to 8 minutes just cruising around in acro mode. We shall see how this thing holds up. Going to try some 300mah,450,and 520 mah lipos too.
@gmascagni
3 жыл бұрын
Funny we were doing this mod on the M6 over a year ago documented on RCGroups M6 thread and on FB Whoop groups etc. For even lighter build u can use a rubber band to secure the cameras to the front and use those nylon screws. Shutterbug has ton's of other to make them lighter. It's good to see that the vendor must be paying attention to the community. I recall you converting your M6 into a 75mm frame for better performance as well. As always great content.
@moblades1
3 жыл бұрын
Good note on updating firmware. When I started... I learned quickly that updating to the latest firmware often required new tuning.
@jmoore3854
3 жыл бұрын
Got my MobLite 6 and 7 two days ago. On my small indoor course I was getting 9 to 10 1/2 minutes of flight time on the moblite7 with the 650mah battery flying 40% to 50% throttle. First time I ever saw the blinking 10 minute warning on the OSD. For the MobLite 6 I was getting almost 5 minute flights on the included 300mah battery. Thanks for the review..... John from Chicago
@Vosper385
3 жыл бұрын
Hi Nick, yes I saw Mr Shutterbugs' video on his light whoop and that's what prompted got me to order the Moblite 6&7, great to see you got yours so quickly, good reviews as always. Thanks.
@piraciosu3
Жыл бұрын
So glad I found your channel, started flying fpv because of you!
@NickBurnsFPV
Жыл бұрын
Thank you. I hope your having fun as well.
@itsme-fr5fr
3 жыл бұрын
@Nick Burns hey man, I couldn't agree with you more when you said that the prop puller is totally useless for pulling props but if you need unhook a motor that uses a connector from the esc then its definitely the right tool for the job! Not sure if you already knew that or not but i figured I'd share incase you or anyone else didn't because that definitely a great little nugget of fpv knowledge that I feel hasn't been talked about very much but think the everyone in the micro community deserve to know. Wow my message ended up much longer then expected when I started out but in the future if even one motor is saved from getting is connected ripped of or even worse and having a wire or its wires torn off then it was all worth it in the end !!!!🤣 Happy Holidays to all and to all a good night!!!
@NickBurnsFPV
3 жыл бұрын
Your right, those do fit perfectly around the connectors, and I think your right again, I don't think I have ever mentioned that.
@me-vo3di
3 жыл бұрын
2:50 in Betaflight CLI do "set crash_recovery=ON" and should be able to recover from such crash even in Acro Mode. Helped me a lot to start with acro inside since I used to crash a lot at the beginning.
@661FPV
3 жыл бұрын
Secret project hu? Excited to see it. I also owe mr benidict thanks for my early whoop days, remember rambo whoop?? Put a 250mah in that 65mm and thank me later! It works on brushless whoops too! Ive been building alot of mobula whoops myself.
@NickBurnsFPV
3 жыл бұрын
I do remember the rambo whoop. There was a shark frame I recall being very tough to get.
@MCsCreations
3 жыл бұрын
Fantastic flying, Nick! Pretty nice looking quads! 😃 Great review!!! Happy holidays! And stay safe there with your family! 🖖😊
@ShinyVideoStuff
3 жыл бұрын
Can't wait to see an STL for the camera mount and experiment with that!
@MrGone2k
3 жыл бұрын
Split a zip tie in the right spot for that style of mount. It's not as easy as it sounds to do, but I think that's where this concept originates from
@tarkusxfpv8010
3 жыл бұрын
Different models here bro www.thingiverse.com/thing:3695276
@ShinyVideoStuff
3 жыл бұрын
@@MrGone2k yes, not managed to get good results with a zip tie myself.
@echobeefpv8530
3 жыл бұрын
Love my Mob 7's, but I'm just a casual flier. Great review Nick !!
@electroddxful
3 жыл бұрын
Great review Nick. You know I'm picking these up. 👍🙏👍🙏👍
@dronedaze
3 жыл бұрын
did you get them yet , I might get the 6 , if you have them , what batteries you use on the 6?
@electroddxful
3 жыл бұрын
@@dronedaze I haven't pick them up yet But I will soon. I get back to you when I receive it.
@dronedaze
3 жыл бұрын
@@electroddxful thanks for a answer , I think I will click on the 6 today ,,,and go with the 300 for now ,, RDQ dosent have the 7
@maadfisher
3 жыл бұрын
That moblite7 looks fun! I’m really interested in that fc, I really like the proper receiver antenna and 200mw vtx. Hopefully the fc is reliable and those props are available soon to upgrade my own mobulow7 in the more durable Mobula7 v3 frame. Thanks for another great review and stay safe.
@tydesenfants7926
3 жыл бұрын
Just took my mobula6 and put the motors, fc and camera onto a mobula7 frame. Wow. What a difference! Went from 90 sec flight times to well over 3 minutes using the stock original 1s 300mah batteries. Highly recommend. Using 4 blade HQ 40mm props with 2 of the blades cut off on the original mobula6 19000kv motors. Excellent performance!
@user-yk1cw8im4h
Жыл бұрын
I love how easy it is to transform between the two models instead of buying yet another quad
@pksteffen
3 жыл бұрын
Appreciate your time Nick! Very thorough review. If you buy motors separately you can get 25000kv. Wish they offered options in the BNF.
@NickBurnsFPV
3 жыл бұрын
Yes, I would likely get some 25k motors on there and change my camera angle on the moblite7.
@tomleclercq3518
3 жыл бұрын
Great video. You are the first person I've ever subscribed to. Love your content!
@itsme-fr5fr
3 жыл бұрын
At first sight I was thinking " um...nick you might need a flight controller on that thing before you can take it out for a flight, I dont think it will fly with just the camera and vtx on there!!" 😁
@toxicfpv304
3 жыл бұрын
these look pretty cool for a fun indoor whoop..... intrested to see what happens with this new breed of ultralight whoopw
@imothy
3 жыл бұрын
Thanks Nick. Your vids are always informative. I wanted to pass on a little trick i've been testing out, soak your plastic frames in WD40 overnight, it will help them not crack as much, especially during the winter. This comes from backyard RC racing club, we'd all soak our A-Arms in WD40, and many other parts that we broke all the time!
@NickBurnsFPV
3 жыл бұрын
Interesting, the plastic must soak up some of the wd40
@shenanigan3083
3 жыл бұрын
Pulled the trigger I've bought alot of things for everyone else so dad treats himself thx nick ofcourse I used the link
@NickBurnsFPV
3 жыл бұрын
dad needs gifts too! :)
@beachinrc101
3 жыл бұрын
Great flying bud & thanks for all info
@NickBurnsFPV
3 жыл бұрын
Sure, let me know if you have any questions. :)
@AsylumFpv
3 жыл бұрын
I'm curious of the durability of parts being more exposed? And the fact that they aren't plug and play, so could be interesting to see! Thanks for the review Nick and wish you and your whole family a very merry Christmas! 🎄🎅
@MrPolleke1949
3 жыл бұрын
This is an awesome video.🙌 Explaning a lot and in the meantime showing flights in the lower left corner.👍 Well done. 👌
@michaelreyes8670
3 жыл бұрын
I was very impressed with Mr. Shutterbug's Super lightweight Whoop. I was thinking of building one until this ones come out. I like to get me one of these instead and maybe mod it with a RD3 Shifters whoop frame. Great review as always. That looks like a hubsan clear prop. I still get plenty of them. Anyway Happy Holidays and Great New Year!
@SOLARFPV
3 жыл бұрын
Wow, very impressive how Happymodel keep innovating the micro RTF world, inspired by community experiments. I am a huge fan of Shutterbug, who has been working on these type of light builds. Should we call them nano, since they are so light and small. Looks like they fly really great. Thank you for the review, I did see them on BG X-mas sales, and was wondering how they fly. I am very impressed.
@MyJam1981
3 жыл бұрын
Awesome review Nick 👍 thanks for all your content and hope you and you family have a good Christmas 🌲⛄❤️
@shogunemperor
3 жыл бұрын
Awesome review mah man! Brilliant flying as always! Love watching u fly around the house.
@nistax2880
3 жыл бұрын
Why does it recommend 650mha ?? Like they go alll this way to make the quad as lite as possible and than slap that big battery on it for no reason like whyy , odherwise good stuff
@NickBurnsFPV
3 жыл бұрын
I presume for max flight time. I wouldn't suggest that size of battery, 5mins of flight on a 520 is plenty. IMHO
@hakancakirkan2319
3 жыл бұрын
I liked the camera mount
@trajanfpv
3 жыл бұрын
I like the 7. That may be a future buy for me.
@rookie101_
3 жыл бұрын
Love the flight time on these.
@licensetodrive9930
3 жыл бұрын
Literally just started watching Rotor Riot's latest video and this notification came in! Ah well, that can wait 30 minutes :) Wait, 30 minute Mobula review video? Niiice
@NickBurnsFPV
3 жыл бұрын
lol, really long, sorry, I cut out as much as I was comfortable with
@licensetodrive9930
3 жыл бұрын
@@NickBurnsFPV No need to be sorry, great view of a great line of whoops :)
@knoopx
3 жыл бұрын
i was impatiently waiting for your review :)
@arpus007
3 жыл бұрын
how to have such a beautiful picture quality without distortion?
@NickBurnsFPV
3 жыл бұрын
I fly raceband 8, with the rapidfire module and two circular antenna.
@dcfpv9004
3 жыл бұрын
Litterally made two ultralight 65 & 75 two days ago 19 grams for the 65 with 0802 19000 happymodel motors crazybee lite board beta frame and lite camera 26 grams on the 75 with 1102 18000kv betafpv motors crazybee lite board mobula 7 frame and the beta pro cam Both super fast and handle great most parts are what I had lying around in my junk box Hot glue works great for a camera mount 😂
@basgerritsen9669
3 жыл бұрын
Great video Nick!
@CoolStuff1
3 жыл бұрын
Hi can somebody give me some advice PLEASE... My Moblite 7 is acting funny. I have Moto Stop on but when I arm Motos still spin and also throttle response is sort of delayed making it unflyable. I also noticed that in Betafight I tryed to set up switches for mod but even though I put it in auto it doesn't respond.... I would be greatful for any suggestion as I am new all this THANK YOU...
@pimpedoutstereos9747
3 жыл бұрын
That camera looks so clear
@qm2105
3 жыл бұрын
Damn! I was so impressed by a Shutterbug’s version with mobula7 frame back when he posted his video, so I immediately ordered the parts he recommended. It took a while before the parts were delivered and I just finished building it last weekend. And it turns out we can just buy a bnf now )) But anyway, mine is with crossfire and betafpv board and it weights the same as this one. It is super fun to fly and it feels very controllable. The only drawback is that the glued camera can come off in a crash, and this is exactly what happened yesterday.. So indeed I recommend getting a version 7 of this two. I think this is the best whoop so far for the indoor flying.
@NickBurnsFPV
3 жыл бұрын
Which kind of glue was used?
@qm2105
3 жыл бұрын
@@NickBurnsFPV I used e6000 plus. Couldn’t find the regular one here. It holds pretty good, but didn’t survive a bad crash. Also ripped the 5v wire from the camera together with the pad and had to solder the wire directly to the resistor. So durability is the main concern here, but I still think this one is the best whoop you can get for the money.
@BornIIfly
3 жыл бұрын
Nick great review! As saw it I thought 75mm toothpick frame. The FC looks really cool! Have to try one. Read your gear for goggle, orca.one. Sry Nick it Orqa.FPV.one Merry Christmas 🎄 & happy holidays. 🤓😉😘
@fpvclub7256
3 жыл бұрын
Nice!. Maybe when my trashcan is ready for the ... Trashcan, this looks like a good replacement :D
@smallsoundrc9678
3 жыл бұрын
Thanks for all the info so helpful 👍🏼
@h2o-fpv623
3 жыл бұрын
Great video thank u and Happy Holidays. I like the review u give a tone of explanation that is informative and with that we can be prepared 😉.
@jibethereal
3 жыл бұрын
Thanks for your review! Love these 2 news happymodel toys... I pre-order the moblite6! 👍👊😍
@NickBurnsFPV
3 жыл бұрын
moblite6 preorder? I show only "Arrival Notice"
@vladrov12
3 жыл бұрын
It can be preordered- Expected to ship before Jan 11. Banggood (10% discount code “BGaFf10oFf“)
@JEMTAC
3 жыл бұрын
nice flying, love your vids mate.
@bentravis99
2 жыл бұрын
Great video Nick, thank you! Your camera looks so much better than the one on my Moblite7 though; mine has very dark vignetting all around the edges that is very hard to adjust out. Oh well, the Runcam Nano 3 was never known as a good camera anyway.
@NickBurnsFPV
2 жыл бұрын
I wonder if maybe the lens took a hit? Was it always that way? I have flown the nano 3 many times and not seen a vignetting.
@bentravis99
2 жыл бұрын
@@NickBurnsFPV It's possible, I have had it for a year now with many flights on it. I might have to buy a spare to swap out and compare, thanks!
@DAZprojects
3 жыл бұрын
Try the uruav uz80, it seems a pretty good toothpick!
@RubyS.1
3 жыл бұрын
Hmmmm I bought a few models of the r3d shifters frames you had a bit ago actually super impressed and I like the aio protection they have. That said there's something to seeing the whoops in the FOV I like.
@NickBurnsFPV
3 жыл бұрын
sure, some do, some don't some are indifferent. I tend to lean towards seeing the whoops as a reminder of how small the quad is :)
@cyberbeefpv2810
3 жыл бұрын
so cool, long flight time
@xfOL.
3 жыл бұрын
hey Nick, correct me if I'm wrong: this new FC has ufl connector for receiver and solder pads for vtx?
@NickBurnsFPV
3 жыл бұрын
The connector is smaller than ufl. Its called the IPEX-MHF3, its for the rx.
@xfOL.
3 жыл бұрын
@@NickBurnsFPV got it, thx!
@fpvnme4845
3 жыл бұрын
ahhhh NICK I just got the board 75mm for the 65mobula,, damn you bang good with your 2 month wait times
@NickBurnsFPV
3 жыл бұрын
I have had decent luck with the $2-$3 shipping options, generally about 2-3weeks.
@trevorimpulsebuyguy6398
3 жыл бұрын
If you had a cat he would be prescribed Xanax for anxiety. Very great video Nick
@NickBurnsFPV
3 жыл бұрын
lol, we used have a cat "rango", during normal times we are out of the house so much he started to go to the bathroom right outside his litter box :(. We found him a new home. During that time he went from a bit jittery around the flying to just annoyed. Typical
@trevorimpulsebuyguy6398
3 жыл бұрын
@@NickBurnsFPV I'm sure Rango was just fine. Sorry you had to find him a new home.
@technoxtreme178
3 жыл бұрын
"MobLite"... does Bangood make us an offer that we can't refuse?
@valden
3 жыл бұрын
Cool vid Nick. Based on the weights and such, i really would argue the 75mm would be better in every way except for being bigger of course. I was planning on doing the same thing, but just use glue to hold the camera in place and not use a canopy. Those motors are pretty nice though! I have some tpu stuff that i can put on top of the board that weighs very little, so that should provide some protection.
@NickBurnsFPV
3 жыл бұрын
Yes, I think we agree. I hope I didn't cause any confusion as to my stance
@valden
3 жыл бұрын
@@NickBurnsFPV of course having both is the best option haha.
@xiledfpv2273
3 жыл бұрын
Hey what antenna you use on your goggles. My video is crap in my house and yours always seems so good
@cookedfpv
Жыл бұрын
ditto, I'm very jelly of his video reception, mine was almost useless with any distance or drywall between me and it. I gave up and switched to a spare x12 fc and swapped to gnb27 connectors while I was at it. my favorite whoop now, but I suspect my antennas are still less than optimal.
@divingfalconfpv4602
3 жыл бұрын
I think he trimmed some the duct to save weight too
@DougEfresh.
3 жыл бұрын
Very cool. I got the Shadow Fiend for more flight time but I'm more of a whoop guy and I would like to see the flight time of 8-10 minutes. This is a good start, thanks.
@NickBurnsFPV
3 жыл бұрын
I think angry Don FPV hovered his for 10mins if that counts. :)
@DougEfresh.
3 жыл бұрын
@@NickBurnsFPV yeah that's perfect
@DougEfresh.
3 жыл бұрын
@@NickBurnsFPV this technology is going to make this a good year I think. Especially if they can get digital stuff cheaper than DJI.
@RenegadeFPV
3 жыл бұрын
Great review buddy, M 7 looking good
@rocketquad5888
3 жыл бұрын
BF 4.2 stock pids are pretty good and with the sliders it's not too bad, but still pretty good advice for beginners. I've grown to really like the bat compensation and thrust_linear.
@johncarold
3 жыл бұрын
First it was Mobilly gates and now the Moblite 7 my wallet is hurting ! LOL I would think that the Mob 7 would be my best guess, I just have to small of a house so I fly in my yard and so outside in no wind and through my gates. Thanks again for the video and information.
@NickBurnsFPV
3 жыл бұрын
Outside with low wind is good. Its just so rare our wind is less than 10mph.
@maxfliesdrones1613
2 жыл бұрын
Just woundering, what is the length and diameter of the copper vtx antenna. Mine broke and im not sure what length it was. Thanks
@deruhu9163
3 жыл бұрын
Put 48k ore even 96k on the esc's .... it improves the flightime substantially overall i think it's a verry neath quad =) waited for that video for a long time
@MyJam1981
3 жыл бұрын
Got 48khz and rpm bf 4.2.9 on my mob 6 hd the hd cam gave up the ghost so I put a small cam I had in the front with heat glue and no canopy ways 20g without battery it's the most fun IV had in a long time round the garden shooting gaps 5 min flight time was only 3 mins max in hd setup thinking of doing the 75mm upgrade do I have to use 2 blade props ?
@tylerseabook9423
2 жыл бұрын
Man ur good at flying in ur house
@situbes.972
3 жыл бұрын
Wow, this make the tinyhawk 1 look archaic‐ flying outside at speed, diving, camera resolution, camera ability to adapt to light, oh and the big one - flight time of longer than 1.5 minutes. Wow has the technology advanced....
@NickBurnsFPV
3 жыл бұрын
Yes, it sure has. And fast!
@kevinmahoney9205
3 жыл бұрын
Both of those cameras looked pretty decent to me indoors. Outdoors, I've certainly seen worse.
@NickBurnsFPV
3 жыл бұрын
I think for the weight, they are pretty good. Strong negative opinions tend to make themselves known.
@ProjectMockingbird
3 жыл бұрын
55mm is the new 65mm and those Afunta props are still one of the best props ever...and yeah, the Afunta/Hubsan hub design is nice. When I mainly used the old Eachine quad blade props I used to take a drill bit that was just a touch smaller than the main hub and drill the bottom out a little to make a cavity. I'm looking forward to getting the 7...just looking at the PIDs you posted, they look a little high, and that's probably why it's all bouncy on first arm...lotsa juice and a "hot" tune make air mode not happy. I'll be slapping Emuflight on mine for PMB, but both of these look fun. I still like the look of the R3D Shifter whoop frame overall, but can't beat the weight of these. Hopefully they will release the FC with plugs.
@kolibrif8242
3 жыл бұрын
I like the idea of getting smaller than 65mm and wonder if size matters in terms of stability if flying in angle mode (Nick seems to prefer 75mm, but he is flying air/acro mode)? What do you think about a brushless whoop smaller 65mm, also in terms of PID settings and use of Betaflight?
@NickBurnsFPV
3 жыл бұрын
Not that this is a question for me, the smallest I have flown was 49mm. But no prop guards/whoops.
@ProjectMockingbird
3 жыл бұрын
@@kolibrif8242 I flew the brushed Tiny Whoop Nano (55mm frame with 31mm props) and it wasn't as stable as going to 65mm. I would think you'd have to shrink the proportions overall to get the same stability, but then you'd have to have tiny motors, tiny props, etc, just like those old old Cheerson ones I first flew. :P 65 is the sweet spot, but as courses are getting bigger and longer, 75mm feels SOOO nice that I would race that if it were the standard.
@kolibrif8242
3 жыл бұрын
I guess I have to try 75mm class ;-) Anyhow, interesting to see how mechanical deficits of smaller whoops can be compensated with a good setup. It seems that it won't get boring anytime soon! @@ProjectMockingbird and @Nick Burns Thank's a lot for sharing your findings!
@jamesroberts8971
3 жыл бұрын
Great video 👍 I think I may have to get a Moblite7 🙂
@alford35
3 жыл бұрын
So I’m fine running the TBS Multi-Protocol module on its FrSky D8 firmware in my Tango 2? I would only need to upgrade the module for FrSky’s newer firmware if were using a newer larger quad? I’m new to all this but have the module bay to install on the Tango 2 along with the multi protocol module and Tracer module. I just got the nano hawk today that has FrySky and plan on getting these Moblite models.
@ragndroneman
2 жыл бұрын
Hi Nick, great video as ever. Kinda like this quad but it is really difficult to fly for me in acro and I have had to retrieve it loads. I found that it was sent with 3x 19000kv motors and 1x 25000kv motor! Do you, or does anyone know how this will affect the flight of the quad or will flying it like this damage the board? Thanks in advance😀👍
@NickBurnsFPV
2 жыл бұрын
Having one higher kv motor, won't impact the other motors or overall flyability. The ESC will spin the motors at the same rate, essentially operating the 25000kv as a 19000kv. disappointing they didn't notice before assembly. Flying in acro does take time and much practice. To ease the frustration, flip into angle mode and have some easier flights.
@ragndroneman
2 жыл бұрын
@@NickBurnsFPV thanks very much for your reply Nick, especially at this busy time of year. Like you said quite suprising this got through quality control. Am currently in a dispute with banggood, wow what a polava! Having to send photos of the packaging and upload a video! (More content for my channel i suppose!) You have reassured me very much and I will flip it back into acro mode.....! All the best to you and yours for the festive season. 👍😀👍
@NickBurnsFPV
2 жыл бұрын
@@ragndroneman hopefully the dispute with BG will eventually work out. It can be a slow painful process.
@ragndroneman
2 жыл бұрын
@@NickBurnsFPV i think you worked it out tbh boss. Knowing that flying with 1 odd motor wont be a massive problem helped. Banggood offered me 10gbp back as a good will gesture, not too bad as the moblite7 cost me 67gbp and I have a spare 19000kv motor from trying to fix a uz80! Just need to learn to solder now! 👍😂👍 Thanks to you for your replies and the integrity you have with your channel. That stuff is priceless.
@NickBurnsFPV
2 жыл бұрын
@@ragndroneman Sometimes these tiny motor wires has a clear coating on them which makes soldering a pain. I have found scraping the motor wire with a knife or fingernail clippers helps.
@NATGEOANDSTUFFPaulbrannan
3 жыл бұрын
Great review nick.as allways
@drewskrds7762
3 жыл бұрын
I was just wondering If you could solder on an external receiver like a xm+ or rxsr? Thanks for the great video Nick!
@tydesenfants7926
3 жыл бұрын
Any source to the 40mm props? I upgraded my Mob6 and put it on a Mob7 frame but I can't find 40mm 2 blade props. I am using HQ 4 blades and cutting 2 of the blades off which works fine but is not ideal.
@ooOoo.....
2 жыл бұрын
Your video of the flight is really clear, very little static. My goggles/DVR are horrible. Does yours look good because of your goggles?
@NickBurnsFPV
2 жыл бұрын
It can be a number of things. Raceband 8 is the best channel to avoid wifi interference. Also, the construction and design. Google and the receiver module due make a difference as well. I have the rapidfire module with one truerc and one axii antenna.
@fpvraver
3 жыл бұрын
Hey Nick I have a question your link is a link for the frame the black frame it’s the Mobula 7 frame is that the one you referred to in the video as the strong one that’s black I thought that was a meteor 75 mm black frame ? So you prefer the mob 7 frame????
@NickBurnsFPV
3 жыл бұрын
yes, the linked frame is the frame I was speaking of. The meteor 75 frame has changed recently, I can't speak to its weight or durability.
@cinialvespow1054
3 жыл бұрын
I see it came with custom bi blade hq props instead of the cut down 4 blades? Very nice!
@NickBurnsFPV
3 жыл бұрын
yes, HQ has made some true/official bi-blades.
@BrandonBeans
3 жыл бұрын
I wonder if popping 'set airmode_start_throttle_percent = 20' and 'save' in cli would fix that funny little thing on startup.
@NickBurnsFPV
3 жыл бұрын
That certainly could help. Oddity is it doesn't happen all the time. Especially noticeable in the crashy flight.
@shroomfpv
3 жыл бұрын
these bois are fast af ... and weight ... my gosh
@wongowonga
3 жыл бұрын
How many times have you knocked that lamp over? Or does it just bounce off?
@NickBurnsFPV
3 жыл бұрын
Yes don’t believe I have knocked a lamp off, they are pretty heavy 😂
@josefdahari
3 жыл бұрын
Dope man been waiting to hear about these glad you got them man
@jeffwinder7010
3 жыл бұрын
Do you have any extreme 'Max' flight times for the mob7lite? Is 10 mins achievable with a larger battery and conservative flying?
@NickBurnsFPV
3 жыл бұрын
I don't have any testing I have done, I think 10min might be achievable with a 800mah battery and smooth flight. I am not sure I have seen an 800mah 1s thought, could be out there and I wonder if it would natively fit.
@sgtfelixfpv8451
3 жыл бұрын
Moblite 7 vs original mobula 6, which one would you choose? Thinking about getting into tiny whoops for indoors.
@madfpv3154
Жыл бұрын
Out of curiosity what do you run for rates if you don't mind me asking?
@NickBurnsFPV
Жыл бұрын
P & R 1.2 .75, yaw 1.3 .80 all betaflight rates
@Sircleanfpv
3 жыл бұрын
Could you please try it with jesc 48khz?
@europenshi540
2 жыл бұрын
Is this drone left or right polarization ? Trying to figure out what my antenna should be on
@NickBurnsFPV
2 жыл бұрын
Neither, it’s a linear antenna. Circular polarized antenna on the google will work fine
@wildleder
3 жыл бұрын
could you please tell me which mockingbird version you used on the moblite7?
@NickBurnsFPV
3 жыл бұрын
I didn't use the project mockingbird tune on either.
@FPVish
9 ай бұрын
how is your video so clear ?
@prettyrichgirl2007
2 жыл бұрын
I was not sure where to leave a comment. I want to buy a cinewhoop for my husband. He has a GepRC GRB remote control (analog controller) for his tinygo, Will this work for the cinewhoop as well. Also, I would like to know which setting should I click on when I purchase the cinawhoop. What floormat should I get to work with my controller? Please let me know. Thank you in advance.
@NickBurnsFPV
2 жыл бұрын
Unfortunately the remote he has isn't compatible. The GepRC remote is proprietary. We could get a different remote like the jumper t-lite or the radiomaster T12 to use with the moblite 6 or 7.
@grabirfan
2 жыл бұрын
Hi Nick, love your videos, I am a fpv newbie, so here is some silly question?, does this moblite7 bind with Taranis qx7 frSky transmitter, or do I need extra receiver, thanks in advance. Also is it for beginners?
@NickBurnsFPV
2 жыл бұрын
whoops are very good to start with, small light and safe. The qx7 should bind to it, but if its a brand new qx7 it might not due to the firmware frsky puts on new radios. Its really frustrating that frsky has new radio firmware that isn't compatible with d8 mode used on most whoops. We have been using d8 mode for years then frsky decided no more on their new radios.
@austinbradley4892
Жыл бұрын
Unfortunately, I cannot get these flight times. I have a proper betaflight setup, flashed ESCs, have a fresh 660mah GNB battery HV battery, not flying aggressive, and can't seem to get even 5 minutes before I hit 3.5V. Anything else I can try?
@NickBurnsFPV
Жыл бұрын
with 1s quads we can choose to land at 3.5v or we have to find the voltage that we need to head to land, then when we disarm the battery voltage will climb back up to 3.5v. Watch the battery voltage closely in my flights, note I am flying well below 3.5v and when I land the voltage recovers back to above or near 3.5volts.
Пікірлер: 490