Buy the MKII V8 Engine on my Store, 2200 RPM Version! All Pre-Modified - sellfy.com/green-gecko-workshop/
@tahimacfarlane0691
4 жыл бұрын
I'm guessing your australian or New Zealand judging by the hills hoist, colourbond house and the shed design?
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
@@tahimacfarlane0691 Yeah nz
@tahimacfarlane0691
4 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop nice. I'm australian and have been all my life but have a NewZealand name. Yet have never been to NZ. When I do eventually come over to NZ could we meet up? Maybe teach me a few thing about how gears work? I have never understood how to make complex/simple gears.
@bloeckmoep
4 жыл бұрын
Really awesome that engine and the whole hotrod. One question here: have you tried to RC'fy the car with a bottle of compressed air spray or iSi soda capsule and an Sbrick for remote controling? That would be the ultimate compressed air rc machine.
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
@@bloeckmoep yes i have
@Dannickized
6 жыл бұрын
Why the hell isn't Lego offering this build for sale ?? If I could build this one with instructions i would definitely buy it !! .
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
This is a MOC (My Own Creation), i didn't make instructions for this one sorry.
@swiftflash
4 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop Would you consider making it available and how do we get the parts? This would be amazing and kid and I both would love this!
@kraken2.049
4 жыл бұрын
Green Gecko Lego Technic Workshop yes please
@justanotherweeb6431
4 жыл бұрын
Where
@cukieras7413
4 жыл бұрын
If they offer this for sale i will cost something like 350 dollars
@staliniumprojectile
3 жыл бұрын
I love the perfect timing of the pistons and the fact that you have built an entire chassis for the engine. The only thing that I miss, that would have made me melt is a gearbox. Anyways it is undeniably one the most amazing creations I've ever seen made with Lego. Great work
@cheesebusiness
6 жыл бұрын
A car on a leash - this is something new
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
it is a air line, for the pneumatic engine
@Polorigolo35
6 жыл бұрын
Reminds me of old 50s wired electric toy cars before RC became a thing
@bradster2214
6 жыл бұрын
sad that it would take a bigger car to make it truly remote controlled, but you might need an nzxt brick? i'm not sure of any better way to do that, i'm not a proper lego nerd soz
@user-Xx0xxxxx
5 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop you dont say
@yourlastbraincell9948
4 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop an* airline uwuwu
@brendenhooper5614
5 жыл бұрын
U should make a LEGO air compressor and use it to power the motor steering ect and use wireless power functions or NXT
@subscribemaybe7861
5 жыл бұрын
I would shrink myself and drive this
@GreenGeckoLegoTechnicWorkshop
5 жыл бұрын
Comment of the Year!
@fin19276
4 жыл бұрын
Lol
@mirrorblade6268
4 жыл бұрын
Save money and buy an Ariel Atom.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
After many hours of hard work building the Whole car it is finally done. I am thinking of building a Pneumatic Power Off-Roader, What size of engine do you think it should have? i am thinking of using a inline 6... Comment Down Below on your thoughts...😃
@thebrickshooter5974
6 жыл бұрын
I agree with the I6, that will fit in nicely with the overall appearance. btw, I really like this build! It's very well made!
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks man
@sebastianhieke1228
6 жыл бұрын
Is something so hard to build so the engine????
@slaz_snipezz7869
6 жыл бұрын
Green Gecko Lego Technic Workshop I think you should do a really low gearing v12 for power so you can really off road I know it's not realistic but it would still be cool an i6 would work too but you need really low gearing
@slaz_snipezz7869
6 жыл бұрын
Green Gecko Lego Technic Workshop awesome creations thoe I wish I had the parts to make these
@SimonsLegoTechniccorner
6 жыл бұрын
The BEST creation I´ve seen in past few weeks... :D
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks man : )
@spacemananimation
6 жыл бұрын
in years*
@maartnnn0507
6 жыл бұрын
Awesome build!! This is probably the best piece of Lego Technic I've seen in years. And man I love the revving engine sound! Excelent job!!
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
Thanks, this is also my favorite model i have built. 👍
@bobtaco99
6 жыл бұрын
Amazing! Really nice chassis and great bodywork. Not to mention that sweet engine ;)
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks, this is my favorite engine i have made so far. an i6 is in the works and a pneumatic chainsaw...
@bobtaco99
6 жыл бұрын
Green Gecko Lego Technic Workshop looking forward to it!
@troy4970
6 жыл бұрын
with this amazingly powerful engine i guess we are a big step closer to make lego fly! i could write an unnecessarily long comment but its better to just say that i love it! if it was for sale i'd buy one ASAP for full price...
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
Thanks, you can buy my complete V8 pneumatic engine on a site called MOCHUB if you want - www.mochub.com/moc/v8-lego-pneumatic-engine-green-gecko
@yelectric1893
6 жыл бұрын
I need to use this song for my car now. All of the cool geckos and hamsters are doing it!
@michaeldickson8208
4 жыл бұрын
Looks so realistic I thought it was a gokart review based of of just the thumbnail.
@LetsBuildIt
5 жыл бұрын
There is something oddly satisfying in this sound on 7:13 It's like "full compressed air ahead!" I love it!
@curiouslamp2841
4 жыл бұрын
I think I'm so smart until I see people build things like this. Like, seriously, I can't even comprehend how you get everything to simply fit together, much less operate.
@StandingUpForBetter
6 жыл бұрын
WOW! I did not know something like this was possible out of Lego. Well done!
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thank you
@sirmrmcjack2167
6 жыл бұрын
One question: WHY THE HELL DON'T YOU HAVE MIRE SUBS???!! THIS IS GENIUS!!!!!!!!
@william2glaser227
3 жыл бұрын
Thanks for the inspiration, im going to try to use powered up controls to make a truly wireless version, and use motors to run the pumps and steering
@GreenGeckoLegoTechnicWorkshop
3 жыл бұрын
Go for it!
@theorks1013
3 жыл бұрын
One of the most beautiful lego builds I've ever seen. 🔥🔥🔥
@christianjayrecto6660
6 жыл бұрын
being an emgineer is so fun you can make what you want and i like it
@KennyThaSharp
4 жыл бұрын
It's so much better than the 2014 lego technic one
@katiev2824
Жыл бұрын
I'm addicted to your videos
@Anttuu
4 жыл бұрын
if you had an rc controller and some sorta liquid gas canister this could be so dope to drive around with. Awesome.
@robinson156
4 жыл бұрын
KZitem recommended is making my childhood creations seem worthless
@Ser11108
4 жыл бұрын
Same
@ivanfraevich942
4 жыл бұрын
This NEEDS to be a set
@dvoichniik
Жыл бұрын
This is nice car!
@SuperChiefer84
6 жыл бұрын
Nice I like how there's no room for a firewall it's all motor!
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks, it was a tight squeeze
@lukepimentel8706
6 жыл бұрын
Wow such a awesome rat rod!!
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thank you
@lukepimentel8706
6 жыл бұрын
Green Gecko Lego Technic Workshop no problem keep it up
@vanillaicecream5226
4 жыл бұрын
One of the best creations out of lego
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
Thank you
@ikanberapi2189
4 жыл бұрын
You could just use wireless activator Btw nice house
@DetoSan
4 жыл бұрын
Its pneumatic tho
@remisvin
6 жыл бұрын
It does go very fast.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
sure does
@kakarot8001
4 жыл бұрын
I think you should give it more torque that way you will receive better power and takeoff by using a smaller and a larger gear
@PiotrBarcz
3 жыл бұрын
So neat, the engine sounds so cool! Just needs a bit of oil here and there to make the squeaks go away!
@grizzlyfox915
6 жыл бұрын
If you gear it down and increase pressure going to the engine it should be more powerful and sound better
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
i had it running nice anyway, will try higher pressure in the next engine video in a few days
@abonneernietopditkanaal5900
4 жыл бұрын
Cool
@Nitwon
6 жыл бұрын
Do you think it's worth lubricating all those squeaky plastic moving parts somehow? I always think about this when I see Lego creations on KZitem.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
yes and no, if you want to use the parts in another model i recommend not to. but if the model (engine ) is going to stay built, it is worth it. my engines no don't squeak so i don't do it. the yellow knob gears are the problem in this car.
@evanreadinger7699
6 жыл бұрын
I wish they weren’t so expensive and hen I would buy all of your mocs
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
Thanks
@iSchmidty13
6 жыл бұрын
Very cool! Steering would be even quicker and more precise if it was hydraulic, could you just fill the pneumatic steering system with water?
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thank you, i chose not to put water in the steering cylinders because it would make it rust. i could use thin oil, maybe next time.
@iSchmidty13
6 жыл бұрын
Green Gecko Lego Technic Workshop good thinking! Rust hadn't occurred to me, are they plastic and steel? I would've thought aluminum or stainless!
@user-mc5mu1xl4w
2 жыл бұрын
thats genius
@1hourmusic4u2listen
4 жыл бұрын
Finally a car that i can afford
@christoph9064
4 жыл бұрын
You could consider making a car with an actual gearbox and the v8 engine. A four-wheel-Drive System would be dope as well!
@PizzaTheSloot
6 жыл бұрын
Straight up thought Yes Roundabout was going to play at the start.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
The photo was taken on a Local Race Track
@oliverssimanis8345
4 жыл бұрын
Oh my god this bloody legend made even the steering with a pneumatic pump
@aadilranesh
3 жыл бұрын
Saw the first few seconds....Immediately subscribed !
@worthybasil2493
3 жыл бұрын
Awesome stuff
@teramgamess4809
6 жыл бұрын
idk about those disslikes... its just great video and creation
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks
@ST3W1010
3 жыл бұрын
I think Lego should add pneumatic pieces like a little electric air pump and things like that.
@Ryan-ql4vz
5 жыл бұрын
i also have a suggestion make a air tank built in so it doesn't need to have hoses following it around
@GreenGeckoLegoTechnicWorkshop
5 жыл бұрын
Yes, i already thought of that.
@dblades8228
3 жыл бұрын
100% one of the best builds iv ever seen
@dripgoku169
3 жыл бұрын
I'd love to see different versions of this. Like a 1969 Dodge Charger with the same chassis, or some kind of adaptation.
@GreenGeckoLegoTechnicWorkshop
3 жыл бұрын
I am Making a New Hot Rod Video this Year, with a New MK3 V8 LPE
@dripgoku169
3 жыл бұрын
@@GreenGeckoLegoTechnicWorkshop That's awesome! I think, it would be interesting, if you'd try to adapt the model for different "shells". I don't know, how difficult it is to design a body, but maybe you wouldn't even have to change the chassis.
@pavlatoar
6 жыл бұрын
freakin amazing man
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks
5 жыл бұрын
Beautiful model!
@GreenGeckoLegoTechnicWorkshop
5 жыл бұрын
Thanks
@mahmutsamikaya3781
9 ай бұрын
Çok iyi yaptın bu harika
@MJ-qd3jg
6 жыл бұрын
So coooollll😍👑i want one
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thank you
@prateeksinghrajput6866
6 жыл бұрын
Amazing cool I don't have words to tell
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks
@artibabbar617
4 жыл бұрын
Awesome 😃
@cas.l9615
6 жыл бұрын
Realy Nice design
@jorosssupercars7318
3 жыл бұрын
😮😮🤩👍🏻 keep it up
@Casas_races4
6 жыл бұрын
I really like this technic build
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thank you
@Casas_races4
6 жыл бұрын
No problem
@eonbree8593
Жыл бұрын
aaaaaaa dang you made it fiirst. this is just still really cool!!
@brickmasterjc8799
3 жыл бұрын
Pneumatic steering that's responsiveness is good & proportion
@yesthepro
4 жыл бұрын
this is like a Doug Demuro video but for a lego car
@umtpz
3 жыл бұрын
It's not a rc but is a good model to represent
@AKant-uk3em
6 жыл бұрын
Good music dude
@WH32R
6 жыл бұрын
if you put lithium grease on the gears, it should silence the squeak
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
i did that, it helped a bit.
@marcopens476
4 жыл бұрын
Respekt! Du hast es wirklich drauf
@jackjorgensen1440
4 жыл бұрын
It’s still beautiful, 2 years later!
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
Thank you
@lordridler914
Жыл бұрын
You need to try and put the engine on the 8860 set
@twixyt2347
4 жыл бұрын
Cool I likey
@12gsxer
4 жыл бұрын
It sounds like an old air cooled Beatle lol fantastic job , have subscribed so I don't miss any of your videos , 👍👍👍
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
Cool, thanks
@K0wp3R
4 жыл бұрын
I WANT IT it's so amazing dude
@lucianlego687
3 жыл бұрын
I might've missed something, but if the controller has to be connected to the car, how does the car drive around and be controlled if the car is just dragging the controller? Dumb question I know, I'd imagine you'd just have a really really long air tube, great build by the way! I love how the wheels can turn
@kidsink7896
6 жыл бұрын
add a rc reciever andmotors and power funtion engines to it and you can make it cordless
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
the "cord" is a air line, the car is fully pneumatic (no electronics)
@kidsink7896
6 жыл бұрын
yeah what im getting at is if you attach the pneumatic pump to the hotrod and put a ir reciever and small motor to pump the pump
@RicardoBS1009
5 жыл бұрын
Tutorial pls
@JustTheRat01
2 жыл бұрын
sure u gotta follow the car around BUT ITS POWERED BY AIR WITH AN RC CONTROLLER
@Nobody-oo2yi
5 жыл бұрын
rather than using the large tank for air storage, i would use a motor to make a compressor so it does not have to have air pumped back into it every now and again, so then you can use it for as long as the battery on the pf battery box lasts, and it might be able to increase speed too. maybe you could do it fora possible v2 version.
@GreenGeckoLegoTechnicWorkshop
5 жыл бұрын
I didn't go with using a air compressor because then you wont be able to hear the Sound from the V8, Air tanks work a lot better from my experience
@clumoostudios3585
6 жыл бұрын
Make a clutch on it, when engine turns on, the wheels don't move. When you put it on forward it will automatically move
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
i would have done that if there was room, thanks
@Sanzerizeli
4 жыл бұрын
Are you kidding))) amazing
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
Thanks
@pokemon555222
6 жыл бұрын
Would be interesting to see this engine hooked up to a motor to be used as a pneumatic generator
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
great idea...
@layeredchip3220
4 жыл бұрын
I imagine that none of the current LEGO compressor designs could run this, could they? It feels like it shouldn’t be that complicated, but I’ve never done anything with technic, so I don’t have a clue.
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
Requires a lot of airflow and pressure, Lego compressors can power my Pneumatic Engines.... It's just easier to use a Air Tank
@layeredchip3220
4 жыл бұрын
Green Gecko Lego Technic Workshop that’s fair.
@lightingmage8067
6 жыл бұрын
its looks amazing
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks
@nightshade897
3 жыл бұрын
vroom
@nabilcabasagan3588
3 жыл бұрын
You should make a formula 1 car with v6 engine :)
@marcelbohmann8844
4 жыл бұрын
Can you please built a Porsche with the 6 Flat Engine, or the 6 Flat Engine in the Porsche 911 Gt3 Rs
@GreenGeckoLegoTechnicWorkshop
4 жыл бұрын
Great idea!
@JoranPrins
6 жыл бұрын
Would it work better for the steering if you add fluid (water) in the cylinders? Maybe it is a little faster response then.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
yes and no, water will make it rust but will be better for the steering. it works fine how it is.
@fidgetspinner6981
6 жыл бұрын
Green Gecko Lego Technic Workshop use distilled
@legoforeverybody4374
6 жыл бұрын
Wooow ! Very nice creation ! Like
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thank you
@maxpaul2837
6 жыл бұрын
dude i wish thati could build like you
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
i'm going to be doing a lego technic training series in a few months time...
@ruslan_s2030
6 жыл бұрын
Really cool,but you should put there big cylinders
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
there is no room
@IlhanMertColtu
6 жыл бұрын
Great work. Well done.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks
@emth7084
4 жыл бұрын
would having water in the lines to the sterring make it more responsive? dunno if thats a good idea though
@Scootube1296
2 жыл бұрын
Please make an air compressor and attach it to the flipping V8 HOTROD!!!
@protheon
5 жыл бұрын
Man, try to connect it to a co2 catridge, remember to connect limiter to it :D
@GreenGeckoLegoTechnicWorkshop
5 жыл бұрын
Co2 is too cold and damages the plastic, causing it to fracture under load
@fayisvv3247
3 жыл бұрын
Can't u make a trailer and fit a tiny air canister on it??I'm not some tech genie.but I want to see it self sufficient
@jeffchoi
6 жыл бұрын
Very cool! I would say to put some flames at the end of the exhaust pipe, but it's cheesy, I know... Nice clutch design in the rear axle too.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks, i thought about flames. i tried it and it looked very cheesy, too cheesy.
@brandenhaberek
6 жыл бұрын
Is there a one way, 2 entrance valve you could use to put one good blast of air in to get the LPE up to a sufficient rpm so that the car goes without needing more air? The pistons then producing their own pressure as it goes??
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
it wouldn't work
@brandenhaberek
6 жыл бұрын
Green Gecko Lego Technic Workshop I wonder why not.. in theory, a one way, dual input valve would.. but then there’s the issue of charging the engine with enough pressure to keep it going.. air leaks in minor imperfections.. yeah.. I see how it won’t work.
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
the engine wont run on it self forever , it is simple physics.
@brandenhaberek
6 жыл бұрын
Green Gecko Lego Technic Workshop wasnt my strongest subject in high school lol.
@superboom7913
3 жыл бұрын
Nice flex
@elyx6795
6 жыл бұрын
That’s awesome
@carysotet7966
6 жыл бұрын
This is awesome
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
thanks
@parazels83
6 жыл бұрын
Please, make the windshield white as well!
@GreenGeckoLegoTechnicWorkshop
6 жыл бұрын
i like how it is
@firedemon2166
2 жыл бұрын
Do you think it’s possible to make a car that doesn’t need to be hooked up to anything and can just get a vacuum into the engine onboard the car type deal?
@GreenGeckoLegoTechnicWorkshop
2 жыл бұрын
I have made an LPE Powered 8x8 Truck with onboard Air Tanks. It Needs air supply to Run any Lego Pneumatic Engine.
Пікірлер: 495