I want to mod my sharpfire very badly, if I were to put an OMW 5KG retaliator spring would it's performance be somewhat on par with basic elite blasters on the market? I want to up the spring and nothing else and maybe paint the trigger orange and tell people I got a orange trigger sharpfire.
@derpypotato3650
5 жыл бұрын
Yeah it would
@pranavprabhakar7572
9 жыл бұрын
I was wondering approximately how much it would cost to commision this blaster with all the mods? thanks
@milanacs1916
2 жыл бұрын
I could do it for you for £40 plus shipping
@mattkins752
3 жыл бұрын
i love how he doesnt tell us how to put together certain parts, and its just him putting it together at 1000x speed, yes very helpful
@itsdark3114
2 жыл бұрын
EXACTLY
@thomasskateboards6561
Жыл бұрын
Fr
@collinoneill6228
Жыл бұрын
Do you not now how to remove screws?
@bradenmatthews9623
8 жыл бұрын
hey eveybpdy i took out that flap er thiing and it works just fine
@jakebenton9146
9 жыл бұрын
removes entire lock to remove minuscule amount of friction, doesent greace plunger tube groves to reduce a lot of friction
@OhYouAnt
9 жыл бұрын
This mod is so good. I love it
@brettbrettson69
7 жыл бұрын
Proper shirt.
@The1nheritor
3 жыл бұрын
Wat
@brettbrettson69
3 жыл бұрын
@@The1nheritor he's wearing a kink bmx shirt
@brettbrettson69
3 жыл бұрын
@@bread4228 read my above post
@SlavicBoi
6 жыл бұрын
the Sharpfire is my favorite Nerf gun... it also was my first with the Jolt and I've modified them bolt and they would destroy people in a Nerf war. Only thing is... I have anxiety and I don't like to have social interactions so I wouldn't go to one.
@mattkins752
3 жыл бұрын
thanks a lot, i can no longer fire my nerf gun
@calebatlee4341
7 жыл бұрын
thnx, i am new to modding nerf guns, and this video is really nice, it is very simple and straight forward, which helps a lot, and is not too lengthy that it gets boring. thnx
@totophi
8 жыл бұрын
Nice! Sounds like a serious punch. BTW, I think they're ALL "China darts," including OEM Nerf ones. 😉
@Ike_AW
3 жыл бұрын
Question: is there a way to remove the air restrictor without a drill?
@CoOzEbOy1
9 жыл бұрын
Where do u get your brass from? It's not available in any hardware stores that I've been to. Also, what is the size of it? Thanks. Great mod guude.
@JayNerf
9 жыл бұрын
I actually had it left over from when I brassed my first longshot over two years ago. I'll be using 9/16 brass for the barrel and 17/32 for the breech. I ordered it from this site: brodak.com/building-supplies/metals/round-brass-tubing.html
@Nesmaniac
3 жыл бұрын
Where do you get the stronger springs?
@ruined_rex7076
9 жыл бұрын
nice shirt and vid
@JayNerf
9 жыл бұрын
Thanks!
@courtlandford3243
7 жыл бұрын
Jay Nerf. plz help me
@m.dultimantemdu9742
7 жыл бұрын
+Jay Nerf (Jaynerf176) sub to my channel nerf content
@DSabolStitchery
27 күн бұрын
Thanks for the video. Could you make a trouble shooting video for reasons why the nerf gun might not shoot as well one you put it back together and why it might be louder than before?
@gaigevanausdal9694
7 жыл бұрын
for those who are trying to beef up the springs, don't try the Nerf rival Apollo spring, it will not catch.
@jeidun
7 жыл бұрын
Gaige Van Ausdal I was about to do that but thx!
@ee9269
6 жыл бұрын
You tell me now... lol I tried it and it broke the catch. It's OK tho I got another one and beffed up the spring by intertwining the spring from my broken one.
@streetricer8758
6 жыл бұрын
Hi can i use a 7kg spring with this? nice video!
@fyodorvoloshin568
5 жыл бұрын
Thanks Jay! Sharpfire is my fastest mod project so far. It was like boom done new gun. Thanks for the guide. Will be my first gun to brass.
@GravelyJones
7 жыл бұрын
Hey Jay Nerf, where can I get silicone grease for cheap besides online, can I get it from Home Depot? I also wanted to ask, what is your favorite nerf gun and modded nerf gun?
@angrydrawings3910
7 жыл бұрын
I made my sharpfire look like a c96 Mauser pistol. Unfortunately, it doesn't work like one. (Yet)
@m.dultimantemdu9742
7 жыл бұрын
what are you planning it sounds like your evil
@angrydrawings3910
7 жыл бұрын
It broke a week ago, so I'm gonna get a real one and paint the tip orange.
@buckzz___
5 жыл бұрын
Angry Englishman WTF LMAO
@ophidslammish1368
6 жыл бұрын
You don't need to take apart anything but the 6 top screws. The rest of literally everything you did slides right out the back.
@watertakken
Жыл бұрын
I modded my falconfire. This one should be easy to mod as well.
@badfart5850
Жыл бұрын
THANK YOU YOU HELPED ME FIX MY NERF GUN AND MAKE IT RUN SMOOTHER
@penjaminthestrange4427
3 ай бұрын
Why do you need the dart tooth if you don’t brass the barrel?
@lone_wolf178
2 жыл бұрын
You don’t need to take off the top 4 screws for the spring unless Your little brother shoved slime in it and tried shooting slime (ps don’t do it because it makes the distance it shoots drastically low to at least 2-5 feet
@Warrior_Saint88
Жыл бұрын
You could essentially do an inline clip mod of this.
@ants2230
2 жыл бұрын
I love the sharpfore my first gun when i was 5 its been 8 years I came across the gun again. The only problem is that its power is so weak
@bkaspe00
6 жыл бұрын
I’m sorry dude but I’m unsure how to remove the orange barrel I think I glued it on because it fell off the first time I can’t remember but I kind of need help
@bingus3183
4 жыл бұрын
wait you screwed that gun?!?!
@kilist174
3 жыл бұрын
Screwed? He made it better
@catgirlsleepy
4 жыл бұрын
Huge Nerf noob here because I prefer lightsabers, but is this a direct or reverse plunger
@JayNerf
4 жыл бұрын
This would be a direct plunger blaster. The easiest way to tell the difference is to determine which part moves. If the plunger head moves back and forth like a piston, it's direct plunger. If the walls around the head move, it's reverse. Some examples of the reverse plunger system would be a lot of the old N Strike blasters such as the maverick, Alpha Trooper, and Recon to name a few.
@mikemelanson3607
7 жыл бұрын
I have the same 🔫
@videoartistMC
9 жыл бұрын
My friend took his apart and then gave it to me to mod and stuff because he couldn't put it back together but the idiot lost the dart tooth
@Ruebenbayona
3 жыл бұрын
Am i the only person who doesent know how to put this gun back togeather..
@phantomgaming909
2 ай бұрын
NAHHH BC HOW THE SPRING EVEN FIT BACK
@itdakiller2538
2 жыл бұрын
Hi Jay, thank you for this video, I was finally able to mod my sharpfire because of it
@dhanueleglaus9104
4 жыл бұрын
What would make it maybe shoot faster and longer distance
@BasicallyBrokenGarageYT
4 жыл бұрын
I just drilled out the air restrictor, what spring should I use without any other mods?
@ryqueezy6327
3 жыл бұрын
I have the normal sharpfire and not the delta version. How do I mod that?
@fredytenu9814
4 жыл бұрын
Indonesian captions please
@yuricrabking
8 жыл бұрын
could you use a stronger spring? or would that break the plastic?
@JayNerf
8 жыл бұрын
You could absolutely use a stronger spring, I personally wouldn't go over 10kg but that's just me.
@justjames9378
3 жыл бұрын
@@JayNerf what happens if you go over 10kg?
@roshh6791
7 жыл бұрын
Wait, if all I'm trying to do is remove the air restrictor (cuz apparently that makes the gun stronger) do i have to drill the peg out. This is also my first time modding a Nerf Gun.
@JayNerf
7 жыл бұрын
Rosh Posh yes, take everything out of the breach so there's nothing restricting the airflow.
@roshh6791
7 жыл бұрын
Thx for the quick reply! 👌 ;)
@JayNerf
7 жыл бұрын
Rosh Posh no problem!
@roshh6791
7 жыл бұрын
Jay Nerf Wait, even if I'm not putting a brass barrell... thing.
@JayNerf
7 жыл бұрын
Yep, you want as much airflow as possible, even if you aren't brassing it
@HatTr1ck
7 жыл бұрын
super helpful cant wait to show my friends! Thanks a lot.
@JayNerf
7 жыл бұрын
Glad I could help!
@docj604
3 жыл бұрын
hi I’m on KZitem
@snyxi9354
4 жыл бұрын
It’s a fake mod
@shane6212
5 жыл бұрын
What would happen if you didn't grease it
@TheBrandoGR
9 жыл бұрын
The alpha trooper spring is the perfect size for this gun, at that spring on top of the stock spring and i got a good 85 foot range with the A.R. removal and almost 120 feet with the brass breech.
@alexmarin8727
8 жыл бұрын
would a standard strongarm spring work? I deformed my plunger tube trying to access the air restrictor and so i have the spring laying around.
@mikemike7129
5 жыл бұрын
Yo i go that gun
@saltytroopa6578
5 жыл бұрын
Can I just change the spring to a 5kg and not remove the air restrictor? Is that possible?
@JayNerf
5 жыл бұрын
Yep! You're definitely able to do that! I'd still recommend plugging that air release hole with some glue or epoxy, but other than that it should function just fine with only a stronger spring.
@noahgorden852
7 жыл бұрын
Thx soooo helpful
@connortaco56
3 жыл бұрын
A spring came out when I drilled it
@connortaco56
3 жыл бұрын
Did I break it
@zacharybrown7354
9 жыл бұрын
Do you have to remove the AR to brass breech the blaster? [I don't have any power tools]
@nikkesh_1579
4 жыл бұрын
Thank u so much. It really works
@aschiavo7930
5 жыл бұрын
T
@irnatiron7280
3 жыл бұрын
It really worked a lot thanks for the guide
@hainarr
5 жыл бұрын
Thanks for the video from Germany! The Nerf Sharpfire of my 9-year old son was not working anymore so he un-screwed the Nerf and had no idea how to repair it and get it together again. With this video I was able to repair it - but I haven't modified it.
@JayNerf
5 жыл бұрын
I'm glad to hear this video helped you out! For younger kids, modifications aren't always necessary. But opening up your first Nerf blaster can bring the tinkerer inside to life, so don't be surprised if either you or your son end up getting into the hobby! Happy nerfing :)
@haydenwoodrow6406
5 жыл бұрын
My trigger is not working. Help pls
@liptonicedtea2256
5 жыл бұрын
Do you have to brass it to take out the lock thing?
@hero4fun560
7 жыл бұрын
ik y u use the grease all the time 😉
@top5gaming9
6 жыл бұрын
You don’t need the safety lock
@jakebenton9146
9 жыл бұрын
removes entire tine mech to reduce friction, doesent grease plunger head groves
@Kyoko_Tsukino
4 жыл бұрын
The orange tip piece on mine won’t come off. So I can’t open it fully. Any suggestions? I’ll point out what I tried as you suggest. And yes, I tried to pry it forward.
@JayNerf
4 жыл бұрын
It sounds like it may have been solvent welded in place. Boil some water in a kettle and carefully and slowly pour it onto the connection point. Use a knife blade to try and get underneath the seam and hopefully you'll be able to pry it off from there.
@Kyoko_Tsukino
4 жыл бұрын
Jay Nerf what’s that welding mean?
@JayNerf
4 жыл бұрын
@@Kyoko_Tsukino It's just a fancy way of saying that the piece is glued in place. Hot water and some gentle prying should break the bond
@stormrtd3461
5 жыл бұрын
Whitout mod is this blaster SO BAD!!!!!!!
@viewmodel
6 жыл бұрын
3:07 can I remove this if I’m not brassing?
@briccedupchiccienuggie
8 жыл бұрын
Thank you
@joecoulson2904
9 жыл бұрын
Family 😀🔫 I'm gonna die
@traviswilliams4034
6 жыл бұрын
The mods cool it works
@smexpemnis1978
6 жыл бұрын
how far can this shoot tho
@eriksuit7375
8 жыл бұрын
would slide grease from a trumpet work for grease replacement as well
@JayNerf
8 жыл бұрын
+Erik Suit Absolutely, that grease is designed to work on brass, so definitely, I'd also recommend polishing the brass before you install it.
@naut4733
9 жыл бұрын
what is the size of the sring you use?
@anamethename3327
7 жыл бұрын
I opened mine and the internals flew about, do you have a schematic for how to put them back in?
@JayNerf
7 жыл бұрын
Sadly I do not, however I'm sure there's a good screen out on google of sharpfire internals, or you might be able to see everything if you pause the video once I open the blaster
@anamethename3327
4 жыл бұрын
I didn't get the notification from this until now... It took youtube 2 years to notify me about the reply to a question I long forgot I ever asked.
@cristoti7689
4 жыл бұрын
Me salvaste la vida ! Thanks!!!!
@josieshepherd7176
6 жыл бұрын
Will Vaseline work
@naut4733
9 жыл бұрын
i mean the spring you use
@TieflingKumasi
4 жыл бұрын
How do you take the “silencer” thing off?
@nou5467
4 жыл бұрын
InsaneTacoz u jus pull it off
@TieflingKumasi
4 жыл бұрын
no u I can’t push those little tabs in really well
@s_kyg1759
9 жыл бұрын
Just an idea, I personally super glue the little springs into the locks and stuff so I don't lose them
@fabulum149
3 жыл бұрын
the springs are so small that you'll end up gluing both sides together instead of just one end
@oweeboy8220
9 ай бұрын
I should have done that, lost so many when taking it apart and now it doesnt work 😭
@hoodedcreeper2465
8 жыл бұрын
this thing could make decent handle for a snap
@hoodedcreeper2465
8 жыл бұрын
or put your rainbow catch upside down and have this thing pull it
@Freethy224
4 жыл бұрын
Will i have to upgrade the catch to make it take a 9kg spring
@JayNerf
4 жыл бұрын
The way it's set up, the catch and trigger are one piece. You might need to upgrade it but I don't believe it's necessary to function, you might still have catch reliability issues at that spring weight regardless but it should work fine from what I've found
@Freethy224
4 жыл бұрын
Ive just done the mod and it works perfectly it just has a heavy trigger pull tho
@holdenkelly07
7 жыл бұрын
Will a 1/4" bit work when drilling out the air hole in the white back piece?
@JayNerf
7 жыл бұрын
Yep! That's perfectly fine!
@holdenkelly07
7 жыл бұрын
Okay thank you!
@GravelyJones
7 жыл бұрын
Jay Nerf can you respond to my question when you get a chance, that would really help me out with my mods.
@turbosteelmeat2274
8 жыл бұрын
Thanks
@Imaboss-rd9yp
8 жыл бұрын
Thanks
@elkayezs8wslkwaterfountain826
7 жыл бұрын
Did anyone count how many times he said "quite well"
@JayNerf
7 жыл бұрын
No, but you should!
@jeidun
7 жыл бұрын
Lol
@jacksauawesome
9 жыл бұрын
what size is the drill bit you used to take out the ar
@DiegoHaynes-sc3jq
4 ай бұрын
3/16ths
@courtlandford3243
7 жыл бұрын
im having trouble with the dart tooth pin placement..can you help which. way it goes
@courtlandford3243
7 жыл бұрын
need help putting dart tooth spring back in ..itsn not easy as you say it is
@SamSquids
7 жыл бұрын
Can i apply this mod with the ionfire
@ganymedeaerospace4580
7 жыл бұрын
Yup. They're basically the same internals.
@nathanielgregg5800
6 жыл бұрын
can you penny mod it
@JayNerf
6 жыл бұрын
I mean, I suppose you could. But it would be a much smarter idea to invest in something like an upgraded spring. Really the only way I could see the penny mod even working would be to put it on the inside of the plunger head which would potentially damage the rest of the blaster due to the weightiness of the plunger head. You're just better off upping the spring power.
@maxbrener6291
8 жыл бұрын
it works with the ionfire to right?
@JayNerf
8 жыл бұрын
Yes, you'll have to shorten the 9/16 brass a bit so that it doesn't protrude from the barrel extension, but the internals are identical otherwise, so it will work fine.
@apotato2787
8 жыл бұрын
can i use a tec six spring?
@iv3975
9 жыл бұрын
Do you do commissions?
@JayNerf
9 жыл бұрын
At the moment, no. I am at school and don't have the ability to paint where I live, so commissions usually wait until summer.
@shortair84
7 жыл бұрын
why do you need the dart tooth?
@JayNerf
7 жыл бұрын
The dart tooth is what helps the darts slide into the breech as you push it forward. It holds the dart in place until the breech is fully closed so it doesn't just get pushed out of the end of the barrel.
@shortair84
7 жыл бұрын
when i slide mine forward the dart stays in the cylinder it doesnt go that forward? reason i ask is cause the tip on the grey tube that hits the mechanism on dart tooth for it to go down broke. while i was drillin hole in back lol
@JayNerf
7 жыл бұрын
Well then you'll just have to push the darts all the way back before you close the breech. It's not a huge deal with the Sharpfire, but with clip-fed blasters, it's a definite necessity.
@shortair84
7 жыл бұрын
oh im sure... thanks tho man your video was awesome... another mess up i did lol i attatched the grey slider and re screwed it with the breach tube slid back. and didn't realize that the square little peg above where i broke the piece that hits the tooth had to be towars the front and fitted into the little half pieces when you re screw the prime halfs. lol i fired it once after and it broke the square peg right off. i had to un screw both parts. super glue peg back on and to the inside where it was supposed to be. cause i could no longer prime cause the barrel stayed forward. lol kind of hard to explain.
Пікірлер: 173