For consulting services please email me at flyflydrones@gmail.com Not a detailed how to, just recorded my steps using the tool i have to wrap the python scripts. All tools available here: github.com/o-g...
I think those are the settings you did for my Inspire 1. I love how it flys now and so responsive and no more restrictions. So glad I had you do it, I had no clue on this one!!
@Cransridge2288
6 жыл бұрын
Hey @Corey - do you know how to install this firmware once it's been modified and repacked? When I check the log file on the MicroSD card afterwards, it says "Result: Abort. The firmware on the SD card is identical to or older than the current firmware on the device."
@josephrubash2233
5 жыл бұрын
@@Cransridge2288 you need to hold the bind button until the camera starts beeping its hidden on the N-core, small red button.
@mychinahk
6 жыл бұрын
Boss, mavic2 pro and zoom The new drone has been released. I hope that the god will crack the no-fly zone and height and speed of mavic2, and the FCC of the remote control RC. Then we can buy a new drone.
@lucalombardo9265
6 жыл бұрын
Can't wait to see the mod for inspire 2
@mtz_mtb
6 жыл бұрын
it´s the same way like mp, p4 etc. look in steves videos
@Cransridge2288
5 жыл бұрын
If it helps any Inspire 1 owners out there, there's a detailed "how to" guide, using Steve's tool, over at greyarro.ws/t/dji-inspire-1-hacks-how-to-remove-nfz-height-limits-modify-flight-parameters-and-increase-maximum-speeds/4368
@digdat0
5 жыл бұрын
thats a great guide!
@WilsonFlyer
6 жыл бұрын
Finally! Thank you!!!
@Cransridge2288
6 жыл бұрын
Steve, as ever, thanks man :)
@MatthewWilliamsFly
6 жыл бұрын
Hi m8... any way to get the firmware for Inspire1 to allow to be rolled back... They locked it. The last 2 firmware updates it really made the Insire fly bad and also signal broke up a lot more. Can we also just get a copy of the bin file? I did donate to you a while back.
@badmoonkid24
5 жыл бұрын
Great video
@victorbotea4244
5 жыл бұрын
Hi! Im a big fan of your work. I owned a mavic pro which worked great after your mods and now im thinking of buying a mavic pro platinum but only if it can be modded again. So my question is, will i be able to do it?
@idsexpert2407
6 жыл бұрын
Hi digdat0, do you think that a modification of the mavic pro 2 will be possible in near future to change parameters same as done when rolling back mavic pro ? regards Franz
@shotbyarian
5 жыл бұрын
will wait for mavic 2 pro hack, thank you :)
@CRUZROYHelicopters
6 жыл бұрын
steve is there a way, and or is it in the firmware for battery trickery , that we can add aftermarket battery, without inspire thinking its not smart battery.....?????????????
@MichaelRHead-zv2zf
5 жыл бұрын
I have basically done all the mods you just did hear but I have a question, on the forced landing I noticed how it didn't give me a warning that I needed to head back home. Is there any way to keep that warning to let me know i need to return home but it not force me to?
@dronelabitaly
3 жыл бұрын
Hi Dear, for FCC on my Inspire 1?
@massimilianotavella4149
5 жыл бұрын
Hi Digidat0 where are you? Why do not you publish anything anymore? I am waiting with great curiosity if it will be possible to modify the flight parameters of the new mavic 2 and the new phantom 4. Are you working on it?
@digdat0
5 жыл бұрын
I opened a restaurant and spend 14 hours a day there 6 days a week, no time. Nothing for the Mavic 2
@massimilianotavella4149
5 жыл бұрын
first of all, good luck for your new business. For the rest it was a shame because you were my favorite informant for the modification of the Mavic flight parameters. I hope that later you can find the time to recover your old passion. See you later
@svarteldcom
5 жыл бұрын
Many thanks for your excellent contribution on modding the FW on the Inspire 1. Grateful. I've almost completed the mod of flight parameters, using the Python tools dji_flyc_param_ed.py and dji_xv4_fwcon.py on a Mac; been able to recompile and rename. I've got an Inspire 1 X5R, aka WM610_FC550R. Firmware is V01.11.01.50. Problem is, my renamed file "WM610_FC550R_FW_V01.11.01.50.bin" to "NMCAPPFw1.bin" is not accepted during service firmware loading (holding pairing button, starting). File gets renamed to: INMCAPPFw1_damaged.bin Error log on SD card says update complete though: WM610_FC550R_FW_RESULT_AB.txt: ========== 2014.01.01 00:00:06 remo-con disconnect====== Packet: WM610_FC550R_FW_V01.11.01.50.bin Upgrading ... ========== 2014.01.01 00:00:06 remo-con disconnect====== Packet: WM610_FC550R_FW_V01.11.01.50.bin Upgrading ... Result: Success. There's an error on dji.retroroms.info, stating same name for different FW: “INMCAPPFw1.bin” for FW 01.05→01.09 “INMCAPPFw1.bin” for FW 01.10 → 01.11.01.50 After failed service update, I need to reinstall original firmware to get the bird working. I've also tried to just rename the original firmware to INMCAPPFw1.bin, but still the same error. Can you please guide me in this issue? Many hopes and thanks.
@SoCal_FPV
6 жыл бұрын
Can I buy the SD card from someone and load it that way? Thank you all.
@dadembira
6 жыл бұрын
is it need rollback Dji go App? My inspire 1 pro raw doesn't work... TT
@adamskypixelds6390
4 жыл бұрын
wow, thank you. is it possible to change from CE to FCC mode ? Atti_Range ? Gps_Range?
@marcularis
5 жыл бұрын
Mavic 2? Or it's almost the same as on the Mavic Pro?
@mateuszgrabowski755
4 жыл бұрын
Is possible to fix FCC mode ?
@user-mn6gu6qc3p
5 жыл бұрын
i missyu....
@shysingh
6 жыл бұрын
is is different for a i1 with x5?
@Cransridge2288
6 жыл бұрын
No, works the same regardless of camera
@shysingh
6 жыл бұрын
Rich how can I get it done? Can it be done with a Mac?
@droneshots8247
6 жыл бұрын
will it work on the inspire 1 v2 do you know
@Cransridge2288
6 жыл бұрын
Yes mate
@sanahaskuranage8071
4 жыл бұрын
Did it work for you guys?
@toddbeaucage1951
5 жыл бұрын
Can I hire you to do these changes to my inspire 1?
@waytooslow
6 жыл бұрын
Mister S - will this work on Pro?
@ravkhangurra7522
5 жыл бұрын
Its been over 3 months, has there been any progress in defeating the NFZ etc..
@Cransridge2288
5 жыл бұрын
NFZ was busted ages ago mate, scroll down these comments for a link to a full how to guide
@cfso1983
6 жыл бұрын
hi digdat0 how can i download your tools mod tool 2.0?
@robtheconstructionbuilder5850
5 жыл бұрын
I was wondering if there is a Surefire way of reversing the hack so you can send it in to DJI for repair is there any way that I can contact you maybe give you my email I've watch all your videos they're awesome well videos that pertain to the mavic pro I should say they helped out a lot I really appreciate it but my drone went stupid the other day smacked into the ground full speed and I need to send it in
@dannykrueger6286
5 жыл бұрын
Can u help with my Inspire Thks
@iz0nlc
5 жыл бұрын
digdat0 You are still alive? beat once one shot!
@758Redwhulf
5 жыл бұрын
What’s it cost for me to get You to send me the file I need?
@user-ev7qw8oi7e
5 жыл бұрын
I can send the modified firmware update for your Drone. I'll make three version for you, one with Full Modifications, another with just Altitude and NFZ Removal, and lastly the stock firmware. Running your drone with full speed modifications can be hard on your battery so you may prefer to run one with just Altitude and NFZ restrictions removed. I just need to know what Drone model you have.
@beyondtheriver3622
5 жыл бұрын
@@user-ev7qw8oi7e Yes please. Just the Altitude and NFZ Removal for my Inspire will be fine. How do I get in touch with you please?
@origamimadesimple9128
4 жыл бұрын
Tim ... hey Tim can you do this for me ?
@Cransridge2288
6 жыл бұрын
Anyone know how do I install this firmware once it's been modified and repacked? When I check the log file on the MicroSD card afterwards, it says "Result: Abort. The firmware on the SD card is identical to or older than the current firmware on the device."
@irieswag
6 жыл бұрын
@rich Hey I paid @digdat0 to set up the firmware and he sent it to me with direction. I was running into the same problem as you are when I tried on my own. And he will do tweaks as needed. My Inspire 1 is a beast now.
@Cransridge2288
6 жыл бұрын
Corey Steward Hi Corey! Are you able to share those directions / instructions mate? Steve sent me a INMCAPPFw1.bin file which I put on the root of the card, is there something else I need to do??
@irieswag
6 жыл бұрын
1. Download the attached file INMCAPPFw1.bin to your computer, somewhere you can remember like the desktop 2. Remove the mini-SD card from the aicraft camera, put into the computer using adapter of sort 3. Format the card in computer, chose FAT32 or EXFAT if asked (this step is optional) 4. Copy the file INMCAPPFw1.bin to the SD card 5. Eject the SD card from computer, put into the aircraft camera 6. Power on the aircraft, it will take 30 seconds or so for the update to start 7. You will hear a distinct noise during the update process, which will change when done. It should take 3-5 minutes - NOTE: If the update does not start, please turn off aircraft. Press and hold the bind button, and turn back on. Hold this button for 20-30 seconds and the update will start, then you can let go. 8. When finished, remove the mini-SD card from the camera and back into the computer 9. Remove/ Delete the "INMCAPPFw1.bin_updated" file from the SD card 10. Put Sd card back in the camera
@Cransridge2288
6 жыл бұрын
Thanks very much for the detailed steps mate! I followed the procedure exactly but my INMCAPPFw1 file didn't get renamed to '_updated' and the log file said the firmware was aborted due to being identical. Appreciate your time in posting that reply, very grateful. If you have any ideas as to what else I could try, I'd be grateful. Thanks again mate :)
@propanes
6 жыл бұрын
Were you finally able to install modified firmware onto the Inspire 1?
@imagesmithstudios9890
3 жыл бұрын
FREAKIN' SPEAK, MAN!!!! What good is a tutorial video if you don"t explain WTF you are doing???
@halo64654
5 жыл бұрын
F
@BigDonnie30
6 жыл бұрын
Anyone selling inspire 1??
@rlaerialphotography5171
6 жыл бұрын
Yes, it’s already been modded..
@758Redwhulf
5 жыл бұрын
I have 2 I can sell
@BigDonnie30
5 жыл бұрын
Jeremy Miller how much?
@rlaerialphotography5171
5 жыл бұрын
Donnie Stubbs I have a mint condition inspire 1 Pro with x5 or x3 camera or both, comes with a ton of extras and 2 tb-48 batteries. It’s firmware is fully unlock, no height restrictions no, no-fly zones to worry about, speed mod. Also has DBS long range mod on the transmitter and prop guards , high altitude props ect,ect.
@758Redwhulf
5 жыл бұрын
@@rlaerialphotography5171 how much?
@dannyluo4585
6 жыл бұрын
Hi digdat0, do you think that a modification of the mavic pro 2 will be possible in near future to change parameters same as done when rolling back mavic pro ? regards
Пікірлер: 71