If you are interested in buying one of these Drill Grinders, click on the link below. MR-13A Drill Bits Sharpener s.vevor.com/bfQX6x Discount code VVPROMO for 5% off
Dont worry about someone saying you sold out. Your videos are very helpful & you deserve to get some free stuff from manufacturers. Personally I enjoy your longer videos. I never had a shop class when I went to school so these videos are greatly appreciated.
@mrpete222
Ай бұрын
Thank you so much 😊
@arcburn3364
Ай бұрын
I’ve been watching and learning from your videos for several years now. I don’t remember watching one of them that I thought was too long.
@mrpete222
Ай бұрын
Thanks
@timothydaniel4511
Ай бұрын
Thank you Mr. Peterson, it is a pleasure watching a professional teacher expound on his area of expertise. You seem to have a lot of tips and tricks that you include in your videos as if they are nothing special. They are! Please go into depth on every aspect of what you do each time. They may seem like nothing special to you but to many of us who don't work in machine shops this information is gold!!
@mrpete222
Ай бұрын
Thank you very very much
@craigsudman4556
Ай бұрын
After many years of hand sharpening drill bits, I finally pulled the trigger on a Drill Doctor and have been very pleased with the results. One of the best reasons for having a sharpener is to be able to sharpen small diameter bits that are very difficult to sharpen by hand. All my bits look like they have come from the factory and I can really tell now when my bits become dull. I don't see the weight of the machine as being a problem as long as the design is good. Great video thumbs up.
@mrpete222
Ай бұрын
👍
@geckoproductions4128
Ай бұрын
Mr. Pete. Thank you for the candid and direct eval of this unit as well as the Americanized instructions. A long time ago you told new machinists to buy a tool every payday. I headed that advice and now I have a pretty much fully equipped shop. (you have cost me a bundle!) This is not exception. I bought one of these upon your recommendation and I am delighted with the price, quality, and performance. One last thing: I am very glad that YOU are getting little something out of this YOU DESERVE IT!
@mrpete222
Ай бұрын
Thank you very very much. I am surprised and pleased that someone actually followed a recommendation of mine, lol. That doesn’t happen in a school classroom you know
@oddshot60
Ай бұрын
Years ago when the first Drill Dr. came out I was so impressed with its performance I gathered up ALL of my millions of dull and broken drill bits, sat down a couple evenings and sharpened ALL of them ... I stored the ones I didn't have indexes for in clearly labeled plastic pill bottles. If one gets dull or broken, I just go to the inventory and back to work. I sharpen the dull ones and return them to stock about once a year. About 10 years ago Drill Dr came out with a new - improved version. I gave my first on to my son and bought the new one. Both machines are still putting sharp points on drill bits.
@mrpete222
Ай бұрын
👍👍👍
@sithus1966
Ай бұрын
I did the same with the Drill Doctor I got. Took it on the job and sharpened every dull and broken bit in the job toolbox. I liked that this one came with a diamond wheel. I think later versions didn't.
@qzwqsy
Ай бұрын
Mr. Pete, I have not found any of your videos that are too long. Thanks for the great video. I look forward to seeing part two. And if it works as good as you say it does, I do not think it is very expensive. FYI, if you show me something in one video, I do not mind you re-showing it in all your other videos. It’s very helpful for me. Learning what you’re teaching. You are a great shop teacher and I very much enjoy watching your videos the longer the better.
@mrpete222
Ай бұрын
👍👍
@peteengard9966
Ай бұрын
I was fortunate that my dad showed me how to hand grind drill bits. He was a tool grinder that worked for CTD before Acme Cleveland bought them and moved to China.
@mrpete222
Ай бұрын
👍
@EDesigns_FL
Ай бұрын
I would like to thank you for producing these videos on drill sharpeners. I purchased a MR-13B bit sharpener after watching your first video about it, and have been very happy with it. Not only does it do a great job sharpening standard twist drill bits, it can also sharpen carbide spotting drills. Because it can accommodate bits from 90° to 140°, it can sharpen bits beyond the range of Drill Doctors sharpeners. The larger grinding wheels also do a better job. For larger bits, Vevor sells the model MR-20G which goes up to 20mm, but it's almost twice the cost.
@mrpete222
Ай бұрын
I’d like to have that larger model
@user-ce7bj4rk8r
Ай бұрын
Banned from the arsenal? I work there. I’ve gotta hear that anecdote!
@jondavidmcnabb
Ай бұрын
Excellent review. I have been seriously considering buying one of these. You have to tell the story of how you got banned from the Rock!!!!
@MAJMAJESTIC
Ай бұрын
Always hated drill sharpening jigs... sloppy cheep junk.. I was sharpening .3mm to 1.5mm drill bits for jewlery making use. 😁 59 degrees for metal and 57 degrees for wood. 12 degree relief. This machine looks easy and accurate. nice would save a lot of effort and eye strain. Thank you for the video.
@mrpete222
Ай бұрын
👍
@feathers352
Ай бұрын
Always fun and educational. Thanks for taking the time to do this.
@brianbowman5402
Ай бұрын
Excellent demonstration as usual!
@4ourE
Ай бұрын
I purchased one of the MR-13B’s because of your original Vevor video…works great! Thank you for this video and look forward to part 2! By the way, I received my #107 😊
@mrpete222
Ай бұрын
👍👍
@brianbutler3954
Ай бұрын
Back in the early 80's Darex sold a version of their sharpening system which you need to use you own grinder with. It used the same high quality chuck as their premium devices. I think I saw it in the Home Shop Machinist, and I bought one and mounted it to a plate with my grinder, it works great but in 40 years I can count the drill bits I have sharpened on one hand. I just buy new or almost new bits at the flea market, even if I don't need them. A man can never have enough drill bits
@mrpete222
Ай бұрын
I am the same way, I have thousands of drillbits and really do not need to sharpen any. I usually throw awaythe dull ones.
@stevebosun7410
Ай бұрын
Hi Mr Pete, a good, honest and unbiased review. Thank you.
@Manuel-mb4zb
Ай бұрын
5:41 The "CE" stands for "Conformité Européenne".The sticker indicates that the manufacturer or importer of that product affirms its compliance with the relevant EU legislation and the product may be sold anywhere in the European Economic Area (EEA). It is comparable with the National Recognized Testing Laboratory (NRTL) in the USA. Some people interpret it as a "China Export". 😀
@mrpete222
Ай бұрын
Thank you
@chipperkeithmgb
Ай бұрын
Stuff the e u
@AmateurRedneckWorkshop
Ай бұрын
I stopped the hunt for drill sharpeners when i got my drill doctor. No doubt the heavy steel sharpeners are going to last a long time and do a good job. Thanks for the video keep on keeping on.
@mrpete222
Ай бұрын
👍👍
@minskmade
Ай бұрын
Nice review sir. I would rather seea review from an experienced machinist such as yourself than some wanna be influencer. Thank you.
@slhasebroock
Ай бұрын
Excellent video Mr Pete. Can't wait to see pt2 to see which one I should choose.
@terryheimerl8674
Ай бұрын
This video is not "selling out". Not when you are showing us a great bit of tooling. Thank you Mr. Pete. Terry from Australia.
@edl5074
Ай бұрын
Great video have it in my Amazon cart. glad you will be taking the time to show it .
@mrpete222
Ай бұрын
👍
@TheMarcball
Ай бұрын
Looking solid, thank you for the review.
@roliver64111
Ай бұрын
Great review on the Vevor drill sharpener, i have been looking at them and now i will be getting one yhank you again!!
@jenniferwhitewolf3784
Ай бұрын
This is best tool review I have ever seen.. Outstanding video..
@mrpete222
Ай бұрын
Wow, thanks! There’s another one coming up in a few weeks
@leeroyholloway4277
Ай бұрын
Nice presentation. I recently purchased a very nice Enco tool/cutter grinder at an estate. (mid 80's barely used) I need to buy some new and varied stones for it and learn the craft. My used end mill collection runneth over. I have pretty good luck sharpening drills by hand, but one of these units would be nice to own. Not a ridiculously bad price either.
@m9ovich785
Ай бұрын
Thanks Lyle... I have a Newer Drill Doctor and had good luck with it. Getting the drill set up takes a bit of Finesse. but it does a good job..
@who-gives-a-toss_Bear
Ай бұрын
Brilliant video Mr Pete what a good system. I use and have a Drill Doctor and have no need to change to another system.
@danharold3087
Ай бұрын
My drill doctor had a plastic 'cam' and it rapidly wore out living in a machine shop,
@dhess140
Ай бұрын
Thanks for the content. I have had a passion for metalworking since I was a teenager.
@mrpete222
Ай бұрын
That's awesome!
@mrpete222
Ай бұрын
That's awesome!
@marionstorm9004
Ай бұрын
Back in 1970 I took a metal working class in college. We had to sharpen plain blades, handsaw blades, and drill bits. You passed your drill sharpening test if the bit would spin out two even ribbons of metal. Also made a sharpening gauge for drill bits, cold chisels, center punchs etc. Like your You Tube channel, the class was an excellent learning experience for practical knowledge.
@mrpete222
Ай бұрын
👍👍
@user-cg6lm3hi6s
Ай бұрын
I've ground drill bits by hand since I was 14 or 15 over 40 years ago
@jamesbonnema1041
Ай бұрын
Your advice is valued,, thank you!
@mrpete222
Ай бұрын
Thanks
@justinahrens1868
Ай бұрын
Great video - thanks for your honest opinion!
@scottjones7279
Ай бұрын
Going to Vevor through your link and waiting for part B
@RRINTHESHOP
Ай бұрын
Well done. Nice machine.
@TheAyrCaveShop
Ай бұрын
Very nice review Mr. Pete these machines are getting quite a few positive reviews.. Something else to add to the wish list. Thanks....ATB....
@johnmoton7467
Ай бұрын
Bought one from amazon, it is unreal how well it works. Had to play with it a little but when I got it figured out can do a drill bit in seconds.But it will not do a lot of bits in a SAE 29 peace drill set as the collets will not hold the bits. (too big or too small) But that being said I'm Very pleased and would highly recommend it for any shop.
@mrpete222
Ай бұрын
👍👍
@user-rk4zm3nb5f
Ай бұрын
Great demo, Mr. Pete. I've been looking for something like this since I retired and no longer have convenient access to the one at work.
@bcbloc02
Ай бұрын
I think they moved it because someone thru the collet in with a drill sticking way to far out and the wheel thru it all back out the top. Putting it so it grinds on the backside removes the auto eject feature.
@TheRecreationalMachinist
Ай бұрын
Brilliant. Thanks for sharing 👍
@j.b.9895
Ай бұрын
Never thought I would hear vevor and quality in the same sentence
@sirmister4411
Ай бұрын
Excellent. thank you ! Good video as always
@steveforbes8287
Ай бұрын
While everyone below is bestowing their love of the Drill Doctor and such, I'm left here wondering about the Island thing! My dad was a Lt. Colonel stationed there during WW-II so I'm quite curious about that! The drill sharpeners are definitely second tier in comparison. LOL
@chrischapel9165
Ай бұрын
I own a Drill DR for drills up to 3/4...it actually produces decent edges but, as mr pete alluded to , the cord is the biggest problem dealing with and instead of dealing with it I'll resharpen a bit on the grinder instead of the drill dr wrestling match.
@100yojimbo
Ай бұрын
Excellent product review Mrpete 👍👍. Vevor seem to sell some top quality products at a good price.
@ericarachel55
Ай бұрын
I've had the Drill Doctor 750 for many years now and it works great, I dont care if the chuck is plastic as long as it works. I have dozens and dozens of bits and it sharpens them all plus carbide bits that I use on masonary and hardened steel
@mrpete222
Ай бұрын
👍👍
@staceygandy2009
Ай бұрын
I have a first gen drill doctor and ok but want one of those. Looks more heavy made and a lot more precise. I have so many good quality bits that need sharpening. Preciate ya video.
@kensherwin4544
23 күн бұрын
At 4:30, you mention that the Drill Doctor collet is plastic. That bit me one time when I negligently left the light over mine on overnight. When I returned to the shop the next morning, I found the collet did not appreciate the infrared from the light and had melted into uselessness. The replacement collet cost was a significant percentage of the original cost for the whole thing!
@mrpete222
23 күн бұрын
That’s a hilarious but sad story
@theseldomseenkid6251
Ай бұрын
It's too bad that we can't buy a high-quality American made sharpener at this price point.
@mrpete222
Ай бұрын
It is too bad, but there is nothing like this made in America
@sloprun
Ай бұрын
Mr. Pete, this is an excellent video, as usual. I have the Drill Doctor. However, the ground surfaces are a bit crude. It works fairly well for larger bits. The smaller bits are a bit of a challenge to sharpen precisely. Hence, the Vevor has real appeal and a fair price.
@Tom-ic7hw
Ай бұрын
ive got a drill doc I wish yo would have shown how you push the bit thru the collet to make another grind picture that you just tap the butt of the bit a little and hope its not to much to grind
@richardbrobeck2384
Ай бұрын
What great pruduct mr. Pete
@blankcanvas7187
Ай бұрын
That Craftsman model works, but you have to have a permanent setup for it with everything bolted down. The advantage it has is that it will sharpen a drill bit larger than 3/4". It is really the only one that I have seen that does that. It is a pain to set up, so I use a regular grinder. I got a grinder from harbor freight that has a groove in the guide and that seems to work good enough. Additionally, it is nearly impossible to find directions on how to use the Craftsman. You have to twist it.
@mrpete222
Ай бұрын
👍👍
@MrUbiquitousTech
Ай бұрын
Great video Mr. Pete! You not only thew that gimmick one away in that old video, you smashed it, lol
@mrpete222
Ай бұрын
Classic
@hughobrien4139
Ай бұрын
I’ve been using a drill doctor for a couple of years now. It is as described in this segment but it does work if you follow the directions to a tee. It will get the job done in a hurry. I only use it about once or twice a year. So just three or four uses. I just have to go over the directions each time. Too long between sharpening sessions. I am particularly interested in see how the end mill sharpening feature works on the second version. If that proves to work I’ll be forced to invest in one. I’ve got several carbide ends mills I’d like to save if at all possible.
@mrpete222
Ай бұрын
I have noticed that also. If I have not used a machine in a long time, I have to learn it all over.
@scottjones7279
Ай бұрын
On your next story telling video tell us about being banned from the island 😊
@mrpete222
Ай бұрын
Probably cannot do that because I am targeted
@mikehinz3096
Ай бұрын
Mr. Pete, based on your earlier videos on these types of drill grinders, I purchased one of the larger units, an MR-20G that can grind up to 3/4" bits. I've now sharpened all my bits and all of my brother's bits, probably over 500 bits! And the machine has worked flawlessly! I'd tried a Drill Doctor and I was not happy with it at all. Just a few points from my experience. I can easily grind bits down to 1/8" but not smaller, even though the collets will hold down to 3/32". The smaller bits are not stiff enough to grind successfully. I do end up using a 10x magnifier to setup the smaller bits. I also only grind 135 degree bits and I always split the points. This is the only grinder that I have ever used that flawlessly creates split points. I like the 135 degree split points so well that I've reground all the 118 degree drills to 135 degree split points. That takes about 2 to 4 passes on the grinder, but it works extremely well. So thanks for the video and I concur with your recommendation! It's a fantastic machine! Mike
@mrpete222
Ай бұрын
Thank you very much for the tips in operating the machine. I intend to attempt to sharpen some smaller bits in the future. I also intend to split the points in a future video. I would like to have the model that grind the larger bits. It really is a great machine, but a bit pricey for some people. Many people are against this machine because it’s made in communist China. But no one in America to my knowledge makes one like this. It is far better than the drill doctor or the. lisle
@ohenrysservicesjeep233
Ай бұрын
I have a Derek love it but I also have a 20 year old Drill doctor I purchased from sear and it works good...I would love it have an end mill sharpener
@mrpete222
Ай бұрын
👍👍
@jerrypeal653
Ай бұрын
I have the 750 Drill Doctor and it’s been fine.
@mrpete222
Ай бұрын
👍👍
@wmleuschen3586
Ай бұрын
I am watching Lyle. I've gotten pretty good with my Atlas Drill Grinder. I bought a cabinet last week and in one of the drawers were 2 NOS 7" grinder wheels.
@mrpete222
Ай бұрын
I still intend to make videos on the Atlas grinder
@wmleuschen3586
Ай бұрын
I really like how easy you make it look. I need one!
@opieshomeshop
Ай бұрын
*_Vevo, you're more than welcome to send me one. Gawd knows I need one._*
@mrpete222
Ай бұрын
Lol
@t0mn8r35
Ай бұрын
That is a very good tool.
@barnowl6807
Ай бұрын
It's going to be amusing watching how fast this sells out on Amazon. Bound to happen. My bet is about 6 days. They need to give you a free Prime membership. (Assuming you would want one.)
@gregdawson1909
Ай бұрын
Looks like a pretty solid machine, but if you get a book and make some jigs, you can do a very passable job sharpening drills, we get good enough results to use shop resharpened drill bits in the CNC Mill. Especially if you have a belt grinder with a table or a toolbit grinder where you can angle the table and use a miter gauge in the t slots.
@mrpete222
Ай бұрын
👍👍👍👍
@user-neo71665
Ай бұрын
Dr doctors are cheap but they do work. The reason you see so many of them 2nd hand is most people start with one and upgrade to something better. I got my drill dr 2nd hand for $5 and have well used it over the years. It paid for itself the first few months of owning it being an electrician we dull up pilot bits for hole saws like they are toliet paper. Heck for awhile I was gathering up dull bits from coworkers, find on the jobsite, and even the plumbers. I would spend about an hour on the weekend and sharpen them all then sell them 1/2 price back to people. That funded me buying one of these better machines I have today.
@mrpete222
Ай бұрын
👍👍
@200932me
Ай бұрын
Oooo, fathers day is coming...
@componenx
Ай бұрын
I have a drill doctor I got for a $1 at an estate sale, and I'm generally happy with it, but every once in a while it produces a negative angle. I've never been to figure out why that happens, but being able to remove the cover easily would help, I'm sure. I always have my feelers out for a Derex, but they usually sell for stupid prices.
@mrpete222
Ай бұрын
👍👍
@chrischapel9165
Ай бұрын
I would like to see a video on why the other grinding apparatuses fail in producing a good,sharp drill/point edge
@tomscott4723
Ай бұрын
Thanks!
@tcs9787
Ай бұрын
My drill doctor works great and 1/3 price and it comes in a hard case to put it away when it’s not in use. Also i can sharpen a drill bit just as fast as the vevor brand.
@mrpete222
Ай бұрын
👍👍
@jimbarchuk
Ай бұрын
A myriad of sharpeners!!
@robertwalker7457
Ай бұрын
Very interesting thankyou.
@hampdentime
Ай бұрын
Thanks for the review. Your review is great because you show and talk about the plus and minus of products. I am now 67 and my father was a machinist that taught me how to grind a drill bit a long time ago. The gages are a must just to keep you in the window for the proper angles. I had to laugh because I purchased one of those General drill bit sharpeners and even bought a grinder only for that tool, it did not get used but a couple of times. I do have to add that it is sad when we in the USA cannot produce a good product like this here for a reasonable cost. That is what we all, admit to it or not, it is the cost or one my say value. The hair stands up on my neck thinking that our dollars are going back to Communist China. They are not to blame, we are all of us. We have sold out manufacturing here and China has filled to void. Unfortunately they also provide drugs that are killing our young people by the 100's of thousands. Hey, you taught me to rant, Just Like You. Thanks Mr. Pete
@mrpete222
Ай бұрын
Thank you that was a good rant, and true
@Riyame
Ай бұрын
They have another model as well, the MR-20G with 18 collets for 3-20mm size
@mrpete222
Ай бұрын
Yes, I hope they will send me one. But they are pretty pricey.
@Pch100
Ай бұрын
Hi Pete just ordered one for myself
@mrpete222
Ай бұрын
👍
@jamesdrake2378
Ай бұрын
Abom 79 is a master at creating content where there is none. Part 1
@nottoday62
Ай бұрын
Brian from Ma.Great video there will be one in the future for me from this video and you’re a hoot Besafe
@mrpete222
Ай бұрын
Thank you, Brian. Be safe.
@philliplopez8745
Ай бұрын
Being able to increase the angle is important if you drill plastics with any regularity .
@mrpete222
Ай бұрын
Yes
@alro2434
Ай бұрын
I use a small oil/wet stone to finish up my freehand sharpening from/on a sorta coarse wheel. Makes a big difference, wish I'd thought about it a long time ago! Real pain trying to grind down/thin the web, lip-relief, split-point, with the rounded edges of my wheels, wouldn't have any wheels left if they were always dressed nice. Also, Sell Out, no way, never crossed my mind, you're the least likely Pimp on KZitem!
@mrpete222
Ай бұрын
Thank you for a nice comment. Thanks for not thinking me as selling out.
@alro2434
Ай бұрын
@@mrpete222 Definitely, positively(and the rest of the stuff the Munchkins tell Dorthy about the Wicked Witch being dead) not a sell out. You could be called a community service with International World Wide Web reach!
@rickarmstrong4704
Ай бұрын
Yes it does look pretty schmick !
@jamesnorman8489
Ай бұрын
Did you say that these can also sharpen end mills?
@daveticehurst4191
Ай бұрын
AH, that's probably why they have no stock of the old ones in either England or Australia. Been trying to buy a drill sharpener from them and at present nothing is listed when you search their website for drill grinder. Will be interesting on how it can sharpen endmills. Wonder if it is just an end sharpen or side flutes as well. Regards from Australia.
@W4BIN
Ай бұрын
I have learned to sharpen bits using a belt sander with a ceramic grit, the back relief is the important part to learn to do. Ron W4BIN
@mrpete222
Ай бұрын
👍👍
@blankcanvas7187
Ай бұрын
This looks like a good sharpener. However, I can't see where it is worth the additional cost over a Drill Doctor. I have used a Drill Doctor for so long that I can't remember, maybe 30 years. I still have the original and the plastic parts are still as good as new. I will buy drill bits from Harbor Freight and run them through the Drill Doctor. After sharpening them with the Drill Doctor, they will cut what I call pigtails all the way through. I don't see how you can do better than that. From the first time that I used the Drill Doctor, I have always said, "Don't let anyone ever tell you that a Drill Doctor ain't worth the money." Don't knock it until you try it.
@mrpete222
Ай бұрын
👍👍
@ellieprice363
Ай бұрын
Drill Doctors have been much improved over the years. I have an early model that works but is very fussy to set up. Later models work better but still need to be clamped down to a work surface for best performance.
@NeverGonaHappen
Ай бұрын
Thanks Mr Pete, I've been looking a drill sharpener but here in Australia they are extremely expensive. It's almost better to buy a D-Bit grinder + Attachments. I've purchased a few things from Vevor and have been happy with them. I'd definitely buy one of their Drill grinder BUT they don't have them in Australia 😭
@mrpete222
Ай бұрын
😂
@christurley391
Ай бұрын
Thanks again
@user-ll9zd2dh6h
Ай бұрын
They bought an expensive Darex at a shop I worked at but eventually people got tired of monkeying with it and went back to using the bench grinder and the old Darex just sat in a corner gathering dust and spiderwebs,a pitiful sight.
@mrpete222
Ай бұрын
Lol
@steveo4749
Ай бұрын
Nice machine.
@dennistennyson8856
Ай бұрын
I must admit that this tool is fine, but for the money and for the fact that the Drill Doctor is still the best tool for the money.
@JohnyLatelyCome
Ай бұрын
I disagree dollar for dollar this is far superior to the drill doctor. The Drill doctor is a 35 dollar gadget masquerading as something more
@mikepoore1653
Ай бұрын
The "Web Diameter" dial on the left is for millimeters and should match the collet used. In other words, if you use a 7-8 collet, then you are supposed to set the dial in the same range. I do not know if it works as designed since I have not bought one, but your video makes it very tempting.
@mrpete222
Ай бұрын
Thank you
@ltdeditions
Ай бұрын
I bought one of these (the 13B model) a couple of weeks ago. I watched a lot of videos, including yours, and it seemed a good machine. Overall, I like it very much. It does a much better job than I can do by hand. The one thing I still ask myself is, why the models with both grinding positions on top of the machine (the 13A has one in the front and the 13B has one in the back, but there's also "pro" models which have both) are so much more expensive (almost 50%, if I'm not mistaken). And if the end result using the "pro" models is so much better to justify this price difference.
@mrpete222
Ай бұрын
The main difference between models a and B, are the point splitting feature. I will cover that in video three of the series.
@ltdeditions
Ай бұрын
@@mrpete222 I watched Stefan Gotteswinters' review of the Motom BSM 13 Duo, that has both. It seems that one is used for splitting the point and the other for thinning the web. On the B model, it looks like they have tried to combine both features in one. Looking forward to the rest of your video's on this machine!
@HaxbyShed
Ай бұрын
That looks good Mr Pete thank you. Unfortunately Vevor do not sell electrical products in the UK, where i am. I bought a drill doctor and I really struggle to get a consistent relief angle. It's not very good. Cheers
@mrpete222
Ай бұрын
I wonder why they are not available in the UK? I still intend to do a video on the drill doctor someday. Many people tell me they love their drill doctor.
@HaxbyShed
Ай бұрын
@@mrpete222 For some reason Vevor became the subject of an investigation into electrical safety and so they can't sell electrical products in the UK at the moment. They have issued quite a long recall list of 'potentially unsafe' electrical products. But I'm seeing the same products sold on other platforms here so I don't know why Vevor has been singled out. I bought the Drill Doctor 360x which is quite basic (but expensive here in UK). A DD500 will cost you 110USD but over here that same product will cost £180 (230USD). Cheers
@TheMadWookiee
Ай бұрын
I have tried 2 drill doctors the 550 and the 750 I think was the models and nother gave a decent sharpen it could be me but I’m looking at the vevor strongly I’ll waight for the b video to release as I have some end mills to
@mrpete222
Ай бұрын
I never have actually use my drill doctor. I went to an auction today and was going to buy another one because it was a different model. But I was instantly outbid. I do not think that the Vevor grinder is capable of sharpening and mills. There is nothing in the directions about it whatsoever.
@ssboot5663
Ай бұрын
What crime committed against the USA? I must have missed that! Oh, I learned to sharpen bits on my own and with Mr Pete 222 and I still suck at it! Patience and GOOD EYESITE are necessary! I'd LIKE a Darex!
@mrpete222
Ай бұрын
😄
@c3h50n023
Ай бұрын
Great video. you're not selling out by featuring quality items. Anyone still making quality needs to be supported
@WrenchHead
Ай бұрын
I know you covered tool quality, but how are the results of sharpening quality by the Vevor machine as compared to the drill doc? Thanks.
@benmorris1657
Ай бұрын
Does the position of the split point grinder hole cause it to have a burr in one direction?
@johnb5519
Ай бұрын
What about drills that have a thicker center section, and have a back cut to make the point smaller.
@Warped65er
Ай бұрын
Thx for the vid.
@kevinsellsit5584
Ай бұрын
This is clearly a high-quality machine with well-made components. I will get the MR-13B for sure. That being said, I think you have grossly underestimated the quality and ease of use of the Drill Doctor. I purchased the exact model of Drill Doctor you show here, on a Snap-On truck almost 30 years ago and it has sharpened thousands of bits at my shop. It is easy to use, and just like this machine can get bits sharper than new, without the need to understand the geometry of the bit which is required here. On either machine, splitting the point is the best feature. Look closely at the image at 17:45. The leading-edge tapers wider toward the outside of the bit, so your index setting is off slightly. This image clearly shows the wide spot in the center of the bit where no cutting takes place. This drill bit will require pre-drilling a smaller hole to go through a piece of 1/2 inch steel plate. Splitting this point will essentially put a smaller drill bit right in the center of this bit so you don't have to drill twice to make one hole. Not all drill bits are 118 degrees, and the Drill Doctor can check and instantly adjust precisely for the two most common angles. This machine is on a whole new level but requires a strong understanding of the bit geometry for one to benefit from its ability to grind almost any type of bit (esp. the MR-13B).
@mrpete222
Ай бұрын
I fully intend to eventually make a video with the drill doctor. I also intend to show how to split the point in a few weeks.
Пікірлер: 230